Placing Aims Search Results

How To: Put together a fall flower arrangement with roses

The flower god demonstrates how to arrange a beautiful rose arrangement for your fall table. A dozen yellow roses, greenery and safflower are used to construct this masterpiece. To begin you need a vase filled with fresh clean water. The flower god shows how to lace the stems of the greenery in and out of one another. The laced stems are then placed in vase and eucalyptus is placed throughout vase giving a cascading effect. Next it is time to prepare the roses. Thorns need to be removed off t...

How To: Draw Oddish the Pokémon

Learn to draw Pokémon Oddish with these simple and quick steps. Start your drawing project by placing the Pokémon Oddish name somewhere on the page. Oddish is a round or onion shaped object. Place this basic shape in the center of your space. Add the feet which are shaped like little shovels at the bottom of the Oddish body. Go to the lower central area of the body and add a triangular shaped tongue. For the eyes, use little circles placed proportionately in the upper central area. Place seve...

How To: Make a Tall Balloon Centerpiece for Weddings & Events

See how to make a very tall, simple, yet elegant centerpiece for weddings and other events. You first need a tube and a base that it will fit into. Placing the tube in the base, use a hot glue gun to secure the tube into the base. You can then fill up the balloons with air using an air pump and tie pairs of balloons together. Twisting together four balloons, place the cluster of balloons around the base of the tube. Repeat with an additional 8 balloons and place this cluster at the top of the...

How to Walkthrough Darksiders: The Hollows

There's plenty of action on this level of the Xbox 360 game Darksiders. In the Hollows, there's Gas Mains, Tremor Gauntlet, Three Platform Room, Turntables, Pump Room, Griever, and Chronomancer. You enter way looks to have once been a train station. As you approach the Redemption lying on the ground you'll be ambushed by the Griever. Quickly pick up Redemption and begin to alternate between rapid fire shots and charge shots. You need to aim for the blue glowing belly of the monster. Dash arou...

How To: Install a glass vessel sink or countertop

This video tutorial shows you how to install a glass vessel sink or countertop. First you need to make sure that the glass vessel sink or countertop has all of the pieces needed and that none of the pieces are scratched or broken. You then need to place the mouthing ring on the countertop where the sink is going to go. Make sure that the rubber side is facing down. Then carefully set the sink on the mouthing ring. You must then take off the tail piece of the pop up drain. Take off the ridge a...

How To: Feng Shui your workspace

Lure luck your way at your workplace by arranging things according to the ancient Chinese design philosophy known as feng shui. De-clutter your desk and workspace, which is the most important thing you can do to balance the _chi_—or energy—in your office. Repair or get rid of anything that’s broken—like a pen that’s out of ink or a flickering desk lamp. They block your chi. The placement of your desk and chair should allow you to see who’s coming into the room. Business and opportunity symbol...

How To: Eat spiders (tarantulas)

Spiders. They live around you, the sleep next to, and they hide in the corners of your room. They're considered pests by most people, but to some, then considered a delicacy. Believe or not, the strongest natural fiber known is from the silk of the Nephila spider, but that spider is nothing compared to a huge, hairy, hideous tarantula. Tarantulas have been a delicacy for years. Enjoy one of these recipes when they are hot and crispy.

How To: Paint your nails with a pink and blue art design

This video tutorial shows you how to paint an interesting design on your nails using pink, white, and blue polish. Begin with a base color. Pink polish is used here. Next do a side swipe using blue. This swipe starts about halfway down the nail and comes up to the top of the nail. Then add a little blue shimmer to the blue polish. Next use white polish with a thin brush to outline the blue. This line can be a little thicker. Then add a shimmery dark blue line next to the white line. Now place...

How To: Prepare grilled gammon steaks with pineapple

This video is about how to prepare grilled gammon steaks with pineapple. So the first step that you will have to do is to wash and dry up the gammon steaks. Then put a little bit of alt season in it. Then place a little amount of oil in the pan to prevent the gammon from sticking. After wards, with the use of a pair of scissors, snip the fat edges of the gammon. In a bowl, place a couple of spoonfuls of honey. Then pour the juice of the lemon and a spoonful of mustard as well. Also, add a sma...

How To: Make your own custom t-shirt with screenprint

This video demonstrates how to make your own custom t-shirt. First you start by placing a magazine on the table. First of all stenciled out whatever you want on a freezer paper. Next take the freezer paper shiny side faces down on the writing paper. So now you will be able to see whatever your drawing or text through the freezer paper. Next take the X-acto knife and cut out the letters. Next remove the peices from the freezer paper. Next place the stencil on the shirt and then iron the shiny ...

How To: Use border punches & a stamp

This video is part of the lawn fawn card series and it explains the making of a card using border punches and a stamp.The materials required are a set card-polka dot basics from paper tray ink.This card has a variety of dots on it. Remove the big open circle polka dot and lay it on the aqrualic and place it on a plastic bock with grids on them.Using a color box cover the stamps with ink.Now place the block over the card so that the grid lines with its length and press on it.The polka dots wil...

How To: Make infant mini clip hair bows

This video shows us how to make infant mini clip hair bows.This requires a high temperature hot glue gun.Three ribbons of the length 4",3" and 1.75" are required.Also needed are an alligator clip,sharp scissors and a lighter.Take the ribbons and seal it with a lighter just enough to melt the ends.Insert a 4 inch long ribbon in between prongs of alligator clip.Make sure the ribbon is centered and flat side of alligator clip is down.Quickly fold the ribbon over the top prong and press firmly to...

How To: Turn an old vinyl record into a bowl or platter

Seeing as record players are getting harder to find, here's something useful to do with your records, turn them into serving dishes! What you need to do is get some tin foil, oven safe dishes and of course records. Two different types of dishes can be made, a shallow plate-like dish and deeper bowl-like dish. For the shallow one use a cake pan for its form, you'll need a glass jar or an empty tin can for the other one. Start off by setting your oven to 350 degrees Fahrenheit or 177 degrees Ce...

How To: Make wool mittens

Olivia shows how to make ‘Woolen Mittens’ in this video, by recycling an old sweater! She begins by washing an old sweater in cold water. After washing, she puts the sweater in a dryer at high heat mode, to shrink it. The washed, dried and shrunk sweater is then placed on a table. The required length of the mitten is decided, taking care that the bottom end of the sweater shall be placed at the point where the mitten ends on the arm. The arm is then placed on the sweater and a mark is made ab...

How To: Throw a big pottery mixing bowl

First of all you have to put some clay over the potter wheel. Now add some water and then press hard with your fingers at the bottom. Now slowly release the pressure of your hands and bring your hands upwards while slowly releasing the pressure. This shall form an inverted cone shape. Now apply pressure with your thumbs at the top to depress in the top and then wash your hands with water. Now use your thumbs to make this hole bigger. Now put a little water in this hole and then use your finge...

How To: Repair broken fingernails

Learn how to repair broken fingernails! You will need to purchase an instant nail repair kit. It should come with polish remover, nail tape, nail glue, and clear polish. First place a little bit of glue right where the slit is. Press the nail together so that it seals. Once it has dried a little, place the clear tape over the break. Next you will place a clear polish on top of the nail tape. Clean up the polish around the sides. Now your nails are ready to be polished in any color that you like.

How To: Marble your home decorations

Marble your home decorationsItems needed: Marobu easy marbling kit with 6 paints, a bucket of water and items to decorate.Make sure the water in the bucket is deep enough to submerse the jar. Add 6 or 7 drops of green, blue and black paint into the water. Stir. Put your hand in the jar and dip it into the bucket of water. Clear the paint from the water for the next project. Place red, yellow and white in the bucket of water and stir. Add the candle. Place it on the side to dry. Clear the pain...

How To: Make an awesome match rocket

In this video we are shown how to make a match rocket. You will need a lighter, a paper clip, a pair of scissors, tinfoil and some matches. Start with two matches and with the scissors cut the heads off. Using the stick of the match measure a square of tinfoil. Place the stick on one edge of tinfoil and roll a little lip around it. Remove the stick and place the heads in the lip that you just rolled. Place the stick in the lip behind the heads so that it is halfway off of your tinfoil. Now be...

How To: Build a LEGO arm chair

Learn how to make a LEGO Armchair with this video tutorial. You will need 4 1x2 flats, 1 2x2 flat, 1 2x2 flat smooth, 2 1x3 chunkies, 1 1x4 flat, 2 2x3 flats, 1 1x2 chunky, 2 curved 2x1 angle bricks, and 3 1x2 flat smooths. Take the four dots and take 1 1x2 flat and place it on top of one of the studs. Take the other flat and do the same. With the 1x4 flat, place it on top of the remaining two black studs. Take your 2 2x3 flats and take the 1x4 with the studs on the top and put them together ...

How To: Make Nintendo perler bead necklaces

The video tutorial is about creating an 8 or 16 bit Nintendo Character necklace. The first step is to select or search an 8 or 16 bit game character, the person in this video tutorial recommends choosing a sprite (which is a 2D character. Doing online search will help a lot in finding a Sprite character. The second step is to gather the supplies such as Perler Beads and Peg Boards. The peg board will be used in assembling the Nintendo Character necklace. Other supplies includes ring, chain an...

How To: Arrange a dozen roses for a fall themed vase

In this video, the viewer will learn how to arrange a dozen roses for a fall-themed vase. You start out by putting warm water into the vase. Next, you weave the stems of various green foliage pieces and place them in the vase. Allow the green foliage to cascade over the edges of the vase for a decorative look. Once the green foliage is in the vase, you can begin adding your roses. Before adding to the roses, all thorns should be removed and the stem of each rose should be cut under water. Pla...

How To: Thread a sewing machine step by step

This video shows us how to thread a sewing machine step by step. To thread a sewing machine: Place the presser foot in the upward position. Place a spool of thread on the spool holder. Traveling from the spool holder, across the top of the machine, look for a minimum of one thread guide. Insert the thread in the thread guide(s). Now look for a tension mechanism. Bring the thread downward to the tension mechanism, slip the thread between the metal disks of the tension mechanism, and travel bac...

How To: Prepare an easy lobster appetizer

Watch this video to learn how to prepare an easy lobster appetizer. Your guests will gobble them up in no time! Ingredients four (1 lb) lobsters six cups mesclun (baby greens) one cup lobster stock one shallot, peeled and finely diced cup vinaigrette one tsp fresh lemon juice Freshly ground white pepper to taste Fine sea salt to taste one bunch fresh chervil for garnish Preparation Cut shelled claw meat into inch wide strips. Cut the legs and shell that covers the tail meat. Cut the tail meat...

How To: Make a smoked chicken lasagna using your barbecue

You can now cook that delicious smoked chicken lasagna you've always longed for with this easy step by step tutorial. Place your raw boneless chicken in a bowl. Add a tablespoon of salt, pepper, basil and oregano. Pour an ample amount of virgin oil into the bowl to let the ingredients stick to the meat and mix with your hands. Let the meat settle for about 30 minutes. Grill the chicken for 40 minutes at a temperature of 225 degrees then at 300 degrees for 20 minutes to finish it off. When you...

How To: Start a fire with a single match

This how-to video is about how to start a fire with a single match stick by Shannon Davis. This video is really helpful especially for those who are going for trucking. If we get struck in the middle of nowhere and if we are in a situation to spend the whole night in the forest definitely this video is very helpful. Before we begin to start a fire we need to gather wooden sticks of different sizes varying from tiny tender straws to hard wooden sticks having thickness of our wrist. First we ne...

How To: Make the bed

Having a hard time making your bed? This video shows you how to properly make your bed. Kids, use this great tactic to impress your parents next time they ask you to make your bed!