Plastic Strips Search Results

How To: Make your own paper box

Gift boxes come in handy when giving quick gifts, but what if you don't have one around the house? Then simply just make your own! This video shows you how to make a small box with just a piece of paper. First, fold a long strip of paper on both ends of the paper. You want it to be the width of your finger. Then, fold the paper in half while the folds are on the inside. Then watch the rest of this video to learn how to master this box-making technique and to start gifting!

How To: Care for fresh-cut flowers

In this video tutorial, viewers learn how to take care of fresh-cut flowers. First, make sure you selected good quality flowers. Then strip off the leaves. Cut the stems at an angle to be able to fit in the vase. Make sure the water in the vase is clean. You can also make a preservative by mixing fresh water with a bit of soda and bleach. This video is very descriptive and clearly explains all the instructions. This video provides very good information. This video will benefit those viewers w...

How To: Make a Frankenstein picnic bag

This video tutorial shows how to transform a paper bag to a picnic bag designed with Frankenstein's face on the front. The ending result of the tutorial is shown in the beginning. The materials needed are listed after the example, including the total number and color of each material needed. The tutorial starts by cutting down the paper bag and folding the top of the bag. Handles for the bag are then cut out and stapled onto the top of the bag – one on each side. To prevent the staples from a...

How To: Make beef jerky on the grill

Upon collecting some onion powder, garlic powder, red pepper flakes, rack pepper, Worcestershire sauce, and soy sauce; slice the steak into inch and a half thin strips. This recipe calls for 6-7 pounds of beef. put the beef in a bowl to prepare for marinating. Measure about a cup and a half of soy sauce and Worcestershire sauce. Use a tablespoon of onion powder and garlic powder. Then take a tablespoon of ground pepper. If you wish, add about a tablespoon of red pepper flakes. Mix that up and...

How To: Fix a loose dread using a crochet hook

Learn how to fix a loose dread using a crochet hook in simple steps. First you have to fix the loose ends by poking through and pulling back at the end of the solid dread rapidly. Fold the tail up, poke through, round it on the hook and pull the crochet back. Repeat the same if you have any spiky hair left. If any hair goes through repeat the first step again to clear it. Repeat these steps again and again until all the hair is stripped in. Finally palm roll it when you are satisfied.

How To: Make firework hemispheres

Nighthawkinlight teaches you how to make firework hemispheres. You start with a softball that will be the basis for the strips of paper you construct the hemispheres from. You take craft paper about an inch wide and soak them in a thin wheat paste. You start applying them on the softball in a pattern that doesn't create a lot of layers on top of each other. You need to spin and squeeze the shell to let all the air out. After you've added two layers of paper, clean off the excess wheat paste w...

How To: Do a Japanese stab stitch binding

In this video tutorial, viewers learn how to use the traditional Japanese stab stitch binding to make books. Stab Stitching is used mainly for office documents and in essence is two or more very strong, long staples that bind together loose sheets up to 25mm thick. The video provides all the materials required to make a book. The materials include: filler paper, two sheets of card stock(must be same size as paper), string, pencil, ruler, ice pick, X-acto knife, needle(must be same thickness a...

How To: Make a SlipKnot mask

Will Wilks and Tom Couch demonstrate how to make a SlipKnot mask. You will need tights, newspaper, plaster of paris, paint and shaping tools such as knives. First, put the tights on your face. Then rip the newspaper into strips and have a friend apply it to your face with the plaster of paris. Wait for it to dry and then cut off the back of the tights to remove the mask from your face. Keep drying the mask overnight. Next, shape the mask to the desired form. You can use more plaster of paris....

How To: Make a cheer bow

Kristina tells us the key steps to making a cheerleader styled hair bow. All you need is one simple thin strip of material, of whatever color or pattern you might want, there being a huge variety to choose from, thread and a needle, and the hair tie that you will then be attaching the created bow to. You make a simple "breast cancer sign" with the material, then further twist it into a bow, then thread the center to hold it together. The last step, of course, being to glue the aforementioned ...

How To: Make a big ribbon bow

Have you run out of ideas to decorate your Christmas tree? Well, here is a fantastic video on how to make big ribbon bows. The video shows how to make bow ribbons in a single color and in a double color. It is quite interesting to see a strip of ribbon change into a wonderful bow. This can be used to decorate homes for Christmas, birthday party or any festive function. Attach one onto a gift packet and see the reaction on the faces of the recipient. This sure is one easy and simple idea to tr...

How To: Transform Kerry Washington into Navi

Architectus777 shows you how to transform Kerry Washington into Na'vi. You can use Photoshop to turn Kerry Washington into an navigator. You start by enlarging the eyes and turning them slightly upward. Expand the bridge of the nose while keeping the tip small. Turn the picture blue and enlarge the pupils. Enlarge the eye socket and line the eye with black. Create some tiger strips on the face and shadow the nose, fade the stripes, and adjust the blue shading. Add white spots to the face and ...

How To: Make fire with a magnesium fire tool

Do you want to learn how to make fire with a magnesium fire tool? Then all you need is a magnesium fire tool and this video. First of all, you need some kindling ready such as dry grass, small leaves, twigs, etc. Create a small pouch for the magnesium strips, then shave small pieces of magnesium into this pouch. Then, use your knife and move it against the flint side of the tool. This will cause a spark, which will catch on fire and the magnesium will assist in allowing this flame to grow. La...

How To: Make honey mustard sauce or dip

Make a fabulous honey mustard sauce or dip with this video tutorial. Put one third of a cup of mayo into a bowl. Add yellow mustard and Dijon mustard into the bowl. Next add a little hot sauce. After adding the hot sauce you will add honey and one table spoon of rice vinegar. Use a whisk and mix it all together in the bowl. You can adjust the amount of mustard, hot sauce, rice vinegar, and honey to suit your taste. Once it is mixed together it is ready. All you need now is your favorite dippi...

How To: Solder a wire onto a switch when building circuits

This is an instructional video featuring Doug Prime, founder of the Future Engineers Center at the University of Massachusetts Lowell. Strip the wire and make sure the wire is tied on tightly before soldering. Don't drip balls of solder. Make sure the tip is clean. Then hold it on the joint to be soldered for 4 seconds. Then poke the solder on the surface and it will melt with the heat.

How To: Hack Smart Cards for satellite TVs

Notorious hacker Chris Tarnovsky opens his underground laboratory to WIRED, providing a peek into the world of satellite television smart-card hacking. This complicated process involves nail polish, a pin head and various acids -- so don't try this at home (unless you're Chris Tarnovsky)! Chances are you won't even know what's going on here, but that's not going to stop you from watching this video tutorial on how to reverse-engineer a satellite TV smart card, is it?

How To: Remove old car window tint

If you've decided that you want to scrape the tint off of your vehicle's windows, you're going to want to watch this video tutorial. In order to strip the tin from the windows, you'll need a single-edged razor, a cleaning rag and an all-purpose spray cleaner. Scrape at the corner of the tint film with the razor and peel it off. Spray the cleaner on the glass , then put back the film onto your automobile's window. Wait about twenty minutes and pull it of again. Now, spray off more cleaner and ...

How To: Save Energy at Home

The most basic way to to cut back energy costs is to keep your house from losing heat in the winter or getting too hot in the summer. Curtains, awnings, ventilators, and weather stripping are all simple changes that can keep the heating costs down, while florescent bulbs can last longer and use less power than traditional light bulbs. Watch this video home improvement tutorial and learn how to save energy at home.

How To: Make Asian style Mongolian beef

This is an amazing recipe that is so easy and delicious your whole family will love it! Follow along in this cooking how-to video and learn how to make Asian style Mongolian beef. Watch as Lila demonstrates the proper way to cut and marinate the beef strips. The ingredients you need for the marinade are: Rice wine vinegar, salt, baking soda, cornstarch, chili oil, sea salt, sesame oil, sugar, and soy sauce. Enjoy this recipe for Mongolian beef.

How To: Propagate Plants from Cuttings

If you want to propagate plants from cuttings, this horticultural how-to will show you how. Make certain you prepare your pot with a propagating mix and make a small hole with your finger. Take the cuttings and strip your leaves. Next, dip your cutting into a hormone gel or powder before putting your cutting into your pot. For more, including complete step-by-step instructions on the propagation process, take a look.

How To: Apply individual false lashes

Most of us aren't born with thick, long eye lashes, but the intensity of fringe can be increased with some falsies. Individual false eyelashes are more natural looking then the strip kind, but can be a bit trickier to apply. This how-to video gives some tips for using false eyelashes. You'll need individual false eyelashes, special glue, tweezers, and whatever eye makeup you want to put on over. Watch this video tutorial and learn how to attach individual false eyelashes to your eyes.

How To: Run USB through the phone lines

Take a look at this instructional video and learn how to run a USB cable through existing phone cords. You'll need two phone jacks, a USB extender, and a phone cord. Although dual jacks are featured in this video tutorial, single jacks are preferred. The process is fairly simple, what you need to do is open up the jack and cut the USB extender in half. Strip to the multicolored wires and match up the the wires with the opened phone jack's, all except for the white wire which will go to the ye...

How To: Trim and prepare a beef tenderloin for cooking

A beef tenderloin can come out dry and tough if not properly prepared. This how to video shows you how to prepare a whole beef tenderloin for smoking in the Weber Smokey Mountain Cooker. Watch and learn how simple it is to do. Start by removing the surface membranes, the fat and the strip of meat along the side of the tenderloin. Finish up by removing the silver skin which tends to make the meat curl when it cooks.

How To: Make no-knead ciabatta bread

In this tutorial, we learn how to make no-knead ciabatta bread. First, place 3 cups of flour into a large bowl with 1/4 tsp yeast, 3 tsp salt, and 2 c of warm water. Stir all of these ingredients together, then place a piece of foil over the bowl. Leave this in the room covered for 18 hours. After this, the dough will be bubbly and soft. Punch the dough down with your spatula, then oil a sheet pan and sprinkle it with corn meal. Then, spray your work surface with water and place plastic wrap ...

How To: Make a miniature medieval flail

In this video, we learn how to make a miniature medieval flail. You will need: glue, string, scissors, drill, paper, cardboard, paints, masking tape, electrical tape, plastic chain (optional), a brush, and a wooden handle. First, crumple up a couple sheets of paper to make it into a ball. Wrap masking tape around it so it keeps its shape. Next, wrap your string or twine around the ball several times at various angles, tying it each time at the bottom. After this, tape it again with masking ta...

How To: Identify tree damage from a natural gas leak

In this how-to video, you will learn how to indicate if tree damage has occurred due to a natural gas leak. In this example, a Mexican Elder tree has been damaged by the gas leak. You can tell by the brown leaves. The plastic around the soil has trapped the gas in the soil, cutting off the oxygen from the tree. The Indian Hawthorne in this example has also been damaged. There is some foliage burn on the leaves. The bush will have to be trimmed back in order to save it. There are several plant...

How To: Change a baby's pocket cloth diaper

Cloth diapers save you money and are more environmentally friendly than plastic ones. Despite these benefits, they are scary to use for beginners. This tutorial will show you just how easy it is to change a baby's cloth diaper and avoid a mess. Once you master this technique you will never go back to disposable again!

How To: Make a New York sushi roll

This video explains how to make a New York roll. First of all spread rice onto the half sheet of nori and spread the toasted sesame seeds. Then add nigir slices of salmon belly, two pieces of Yellow Thailand, two pieces of seared sesame tuna. Then use a frying pan with oil to sear all four sides and then add sesame seeds on each side. Roll it up and tap each ends after that apply a thick layer of tempura flakes on the top of the roll and then roll the roll with a plastic wrap over it. To mold...

How To: Install under cabinet fluorescent lighting

It can be very difficult to see underneath wall cabinets. The cabinets and your body can cause a lot of shadows and make it very hard to see. Getting light under the cabinets is very easy. The answer is to install thin profile fluorescent lights that are made to go under the cabinets. Remove the diffuser and bulb from the lamp and you will expose the screw holes. Put the lamp up under the cabinet in the location that you want them to hang. You want to install them as far forward as possible. ...

How To: Remove a tick

A hungry tick is a determined little bugger—it wants to find its way into your skin if it’s the last thing it does. Here’s how to make sure it is the last thing it does.