Precious Metals Search Results

How To: Secure crimp beads with crimping/chain-nose pliers

Attention jewelry makers! When making your own unique jewelry designs, one must learn how to secure the end crimp beads with crimping or chain-nose pliers. Crimp beads can be used for finishing off your strung jewelry or as "stoppers". In this tutorial, learn how to hone your jewelry-making skills!

How To: Strip wallpaper easily

In this tutorial, we learn how to strip wallpaper easily. First, you will need to take a wallpaper stripper and run it along the wall so you cover all of the spots that it touches. After you have done this, run the stripper diagonally along the wall, then spray the wall with some warm water mixed with dish washing soap. Once finished spraying, use a flat metal putty tool to pry the wallpaper from the walls. Once you tear it off in one spot, you should be able to remove larger pieces. Once fin...

How To: Install a foot throttle on your lawn tractor

In this tutorial, we learn how to install a foot throttle on your lawn tractor. First, weld the petal onto the base and create your own holder for the rod so it stays in position. You will have to bolt it down so it stays in place and doesn't move. On the other side, put a holder on it so the rod stays in place and doesn't move. There should be a bolt on it so it doesn't move and a clamp that is welded onto the end of it. The, string a thin metal wire to connect onto the end and bolt it onto ...

How To: Make a holiday wreath on a budget

In this tutorial, we learn how to make a holiday wreath on a budget. You will need: branches, round wire frame, Next, buy some holiday flowers, and ribbon. First, start to arrange your branches with some wire and mix different types of branches together. After this, start to add in the flowers and some holly to the branches as well. Tie these tight in different bunches so that you have a more secure bundle. After this, start to wrap them around the round metal frame that you have, then situat...

How To: Clean black suede shoes

In this tutorial, we learn how to clean black suede shoes. First, remove all the dirty from the shoes. After this, spray on a lot of shampoo to the shoes, then brush with a suede shoe brush. After this, use black suede dye and spray it all over the entire shoe. Make sure you have plenty of color, so your shoes don't turn out different colors. To finish this up, use a rag to clean off the metal parts on the shoe, then you will be ready to wear them! This method only takes a few minutes and wil...

How To: Make a tightrope walking magnet

In this how to video, you will learn how to make a tight rope walking magnet. You will need a power supply with currents between 15 to 25 amps. A thick wire from a half to one centimeter is also needed for the tight rope. A small neodymium magnet will also be required. String the wire from one end to another. Place the magnet at one end. Use a pair of pliers and a piece of metal as a switch to run the current through the wire. Once that is done, the magnet should go down the wire. A magnetic ...

How To: Clean the trackball on a BlackBerry Bold cell phone

This video instructs you on how to clean the trackball on the Blackberry Bold 9000. Begin by turning off your Blackberry and removing the battery. Using a torque T5 screwdriver, remove the 6 screws around the edge that hold on the cover. Remember that doing this will void your warranty. Once the cover is removed, use your screwdriver to lift off the circuit board. Be aware that the USB port can get stuck. If that happens just push the port down slightly and you should be able to remove the ci...

How To: Install gutter guards for less mess

In this tutorial, we learn how to install a gutter guard. First, clean out your gutters of any rocks or leaves that may be inside of them. Next, gran the gutter guard and place it between your roof and the gutter. Gutter guard is a mesh type of metal that is flexible and easy to use. Now, take your gutter guard and place it on a long and thin piece of wood so it gets to be the same shape as the wood. Now, take the gutter guard and place it into your gutter. This is a great way to keep your gu...

How To: Use crimping pliers

In this video arsbeadsvideos instructs you on the use of crimping pliers, crimp tubes and how to use crimp covers. Make sure you use jewelry wire that is fine enough to fit through the holes in your jewelry. On your crimping pliers you'll notice there are two notches, also called stations. The first notch is furthest from tip of the pliers and has a raised bump or dimple in the middle. This helps to created figure-eight crimps. The second notch is used to form the crimp into a tube shape. To ...

How To: Put a spare tire on your car when you get a flat

Graham from TV Lesson explains how to change a tire. In most cars, the spare tire is located in the trunk, along with the jack and tools. First, look under the car and locate the folded pieces of metal to find the jack point. Raise up the jack a bit and slide it under the jack point. Next, using the lug wrench, break the torque on the lug nuts. Then, jack up the car. Once the car is jacked up, remove the lug nuts. Next, remove the flat tire and place it into the trunk of the car. Place the do...

How To: Practice skateboarding safety

Whether you’re headed for a half-pipe or your driveway, always be safe. Wearing protective gear and taking a few precautions can help prevent you from landing in the ER. Watch this video to learn how to practice skateboarding safety.

How To: Cut and bend sheet metal

In this series of video clips, you’ll learn tips and techniques for using various types of metal shears, including how to use hand-held and foot-operated types of metal shears, and how to use a metal press and metal hole punch. Expert Jon Olson offers advice on cutting procedures, the proper clothing and precautions, and advice on maintaining and cleaning metal shears. Jon also covers the electrical requirements for operating an electric shear, the various points of danger when operating the ...

How To: Clean a crockpot

Over time, stains can collect in your crockpot. Learn how to properly clean your crockpot and remove stubborn mineral stains and water marks. When cleaning the crockpot, fill it with hot, soapy water once the cooker has cooled. Let it soak for 15 to 20 minutes, then scrub with a cloth, nylon pad, or plastic sponge. Do not use harsh cleaners or metal pads. Rinse well in hot water and dry.

How To: Demon Hand Armor Tutorial (Video)

Here's my latest armor tutorial...what I call the "Demon Hand". The method used in this tutorial can be used to create pretty much any armor. This one is is 18 gauge brass, but if you use stainless steel I suggest 20 or 22 gauge. This is the easiest of all of my gauntlets to create, and it takes a lot less metal. Less than an 8.5" x 11" piece (per hand). Would make cool motorcycle riding gloves!

Spiderbrella: How to Turn an Old Umbrella into a Man-Eating Spider

Spiders are my least favorite thing in the world. My second least favorite thing are cheap umbrellas. So, it's only fitting that the two work perfectly together as a creepy Halloween prop. In my video below, you'll see how to make a Spiderbrella, which is just the inside metal skeleton from the umbrella (which looks like a crawling spider), the umbrella's original black fabric, a couple Styrofoam balls, and some floral wire.

How To: Make an Iron Man Inspired Gauntlet (in Metal)

Here's my latest gauntlet, made in 22 gauge stainless steel using ordinary hand tools you probably already have in your garage. I used Iron Man for inspiration, but it's far from an exact replica. Unlike my previous gauntlets, there is minimal riveting, as most of the parts are held to the glove using epoxy, along with some small nuts and bolts. Aside from cutting out all the parts, which is a little tedious, it's actually fairly easy to do. A fun project for anyone into metalworking, prop ma...

How To: DIY Decapitated Head Drinking Fountain: The Perfect Way to Serve Blood-Red Punch on Halloween

Costume parties are in full effect this weekend, so with that said, how cool would this look at your Halloween party? Instructables user castor009 made two holes in the head (one for inserting the PVC tube, the other where the liquid will spew out) and insert the pipe and tubing, then stuffed it to secure everything. He then fit the bottom tubing through a pencil holder and attached it to a water pump. Then just add whatever you want to serve at the party (I would suggest anything red or blac...

How To: Make Toast Cooler by Modding a VHS Player into a Working Toaster

Toasters can do so much more than toast bread. A toaster oven can make your Halloween jack-o'-lanterns look pretty creepy, and you can even mod one into a reflow oven. But what about a regular ol' toaster? Well, you can turn one into a working NES console—or you can keep its bread-toasting functionality by just making it look cooler, like Instructables user lemonie did with his VHS player toaster mod.

How To: Use Flickr to share photos on the Internet

Flickr is the most known and dependable photo sharing website to date, so if you haven't made an account yet, you better now, if you want to share your precious photos with family, friends, and even the whole world! Flickr allows you to store digital photographs online and share them with other people.

How To: Save water in six easy ways

Are you aware of your water usage? Are you really doing all you can to conserve water, our most precious resource? Here are some simple ways you may not have thought of and some facts about the amount of water wasted on a daily basis in America.

Tip: Quickly Switch Between Front & Rear Cameras on Your Galaxy S8

It's never fun to fidget around with your phone's camera while you're out and about, especially when it comes to transitioning between its front- and rear-facing cameras. Thankfully, Galaxy S8 users can scratch this one off their list of inconveniences, as Samsung has built in some nifty features that let you switch from the main shooter to the selfie cam without having to look at the screen or tap on the camera switch icon.