Proper Size Search Results

How To: Pierce your own septum

In this video, Megan shows us how to do a self septum piercing. First, take your favorite brand of astringent and clean the area you are piercing. Next, take a clean needle and clean it with the astringent. Now, place the needle inside your nose and poke through on both sides of the nostril until it's all the way through. Once the needle is in, grab your nose ring and keep pushing the needle through replacing it with your nose ring when it leaves. Make sure to clean regularly with the proper ...

How To: Care for house plants growing in water

Growing plants in the Southwest is different then other climates. We learn how to grow plants in water. Salt is a factor that we need to be cautious of. Salt is in soil and in water. Water, once absorbed leaves a layer of salt. It can be avoided by watering in a certain way. Changing the water frequently, a dish underneath a potted plant to drain the water and flushing out the salt and re-potting periodically. Sometimes extremes measures must be taken to hydrate a plant. In this case putting ...

How To: Trim rose bushes

In this how-to video, you will learn how to trim rose bushes. You will need a pair of shears and roses. Cut anything growing from the summer. You should also cut any old wood as well. This will leave new growth for the rose bushes. The best way to remove this is to go in and cut it with almost an inch of cane left. Continue to cut the dead wood. Next, prune above the buds on the top. Do this all around the bush. Make sure they are all about the same height. Look for a good outside bud before ...

How To: Draw nine goldfish in free style

In this video, artist Henry Li, shows you how to draw nine goldfish in a free hand, loose style. He demonstrates proper hand placement, and technique in order to achieve a fluid motion to the piece. Nine goldfish is a good omen for Chinese, it suggest best fortune. Watch the magic happen as he shows you exactly how to achieve this excellent work of art.

How To: Origami a snowflake designed by Dennis Walker

For all you origami fanatics out there... Why not try this project on for size? In this two-part video tutorial, learn how to origami a pretty impressive snowflake designed by [www.origamidennis.co.uk/ Dennis Walker]. For this project, the recommended paper size is a hexagon with a side length of 10cm (approx. 4in).

How To: Train a horse not to kick you

Horses don't kick their owners and handlers unless they think it is okay, or unless they think there won't be any repercussions for their actions. The gentleman in this video shows you that being gentle with your horse can go a long way!

How To: Make a professional latte

Head Judge for the World Latte Art Championship, Paul Meikle-Janney, shows how to make a latte using the Brasilia Opus Sublima espresso coffee machine. Paul briefly explains that the process is somewhat similar to creating a cappuccino, noting that the major difference is how much foam you'll be creating on top of the beverage. This video shows the necessary steps taken to create the latte, creating the foaming texture and the single espresso at the same time. During this process, Paul offers...

How To: Give a cranial sacral massage

Psychetruth shows you how to give a cranial sacral massage. This therapy works with the head and the skull bones and the base of the spine. This structure is being influenced by the massage. The massage is done by placing hands on the face and apply pressure to the different parts of the bones. By applying pressure and holding them in place you will feel an expansion. By holding the pressure as it expands the bones can find their way back to a proper alignment.

How To: Solder wires

Soldering properly is a skill every electronics and computer hobbyist needs. Proper soldering appears deceptively simple, but it requires practice. One has to do the steps below to solder the wires which is as follows, First Clean the area you wish to solder and scrape the wire down to the metal and then wiping it clean with alcohol or acetone. Then you want to use a rosin-core solder for electronic applications, which comes normally with coils. Tin the tip of the first Wrap one or two inches...

How To: Remove JPEG artifacts in Photoshop

Photoshopuniverse shows how to remove JPEG Artifacts in photoshop. It's simple. Sometimes it happens that, you get the best picture which is related with your work, but unfortunately its low quality or small. If you zoom in a small picture it will pixilated. You will see some blocks. Luckily there is a way to remove it from photoshop. Go to- filter, then noise, then reduce noise. There will be an options of removing JPEG artifact. Check that. After watching the video you can remove JPEG artif...

How To: Understand factory auto maintenance schedules

In this video, viewers learn about factory maintenance schedules and how to care for a vehicle. The series explains the differences between repair and maintenance, and the difference between do-it-yourself repair and professional auto repair services. Tips address choosing an auto mechanic and following factory and maintenance schedules. Increasing your vehicle's safety, reliability and longevity through proper maintenance also is discussed. This video will benefit all viewers who own a vehic...

How To: Make Pakistani bbq-style chicken tikka

Learn how to make BBQ Chicken Tikka without actually using a BBQ! Learn what ingredients you will need, proper preparation steps, and cooking techniques. Learn the importance of the BBQ net in order to enhance dish for the fullest flavor! Video provides examples on garnish ideas to allow you to send out your perfect plate. If you follow the steps in this video you will learn to create an authentic Pakistani dish that will be perfect for social gatherings or for a quiet family dinner.

How To: Select and prepare Jackfruit

Have you ever heard of the East Indian fruit Jackfruit or Kanoon? The Jackfruit is one of the largest of fruits and almost every family in Thailand has a Jackfruit tree in their backyard. You can learn how to properly select a Jackfruit based on ripeness and learn the proper way of cutting it. Since the fruit is very sticky, it is best to oil just a little bit before cutting into the fruit. You can eat the fruit cold or use it as an ingredient in a meal. Save your seeds, and you can roast the...

How To: Improve your golf stroke with putting drills

PGA Professional Rick Sessinghaus discusses three different tips that can help all golfers, from the amateur level to the tour professionals, can do to help improve their putting. The first tip focuses on improving hand and eye coordination by simply looking at the whole the proper way. The second tip deals with the reading the speed of the greens while putting. Finally the third and final tip helps the learner better read the line of the put. Rick believes following these three tips will hel...

How To: Peel a tomato, blanch vegetables, & cut carrots

This video shows you how to prepare a few different kinds of vegetables and fruits to cook with. The first thing that this video shows you how to do is peel a tomato. This video shows you a very simple way to do this using only a knife, a pot of boiling water, and a pot of water full of ice. The second thing this video shows you how to do is cook vegetables like broccoli without them browning and losing all of their nutrients. All you need to do this is a pot of boiling water, some salt, and ...

How To: Change color of specific objects in Photoshop

Adjusting the color of specific objects within your images in Photoshop is crucial. Sometimes fine tuning the color of just one component in an image is required. While an image may be adjusted globally at once, this approach lacks flexibility. This tutorial will show you the proper steps from the creation of an adjustment layer to the appropriate and functional calibration of the hue and saturation options. Get the most out of these tools and maximize your productivity in Photoshop.

How To: Use multiple monitors with your Mac

Sometimes just one computer monitor is not enough. Whether you are working on a detailed art project, multiple files at once, or simple wish to open more windows, you may need to connect multiple monitors to your Mac. In this video, Gary Rosenzweig from MacMost.com shows you how to hook up another screen to your computer and make the most out of your desktop space. It is actually very easy to hook up a second monitor to most Macs. Once you get a monitor and the proper cables you are good to g...

How To: Prep for auto racing with proper seat belt security

There are two ways to properly lock your seat belt. You can use the childlock auto adhjustment. Or you can recline the seat, but then push forward to make your seat belt very tight. You don't want to be flopping around in the car. The bottom of your wrist is on top of the steering wheel and your shoulder is in the seat. It will loosen up when you get on the track.

How To: Big wall rock climb with proper back up knots

This is part of the How To Big Wall Book. In this segment Chris McNamara demonstrates how to use back up knots when jumaring. This is a technique video for summitting or sending problems on big walls outdoors. The knots are crucial for safe and effective rock climbing technique. When you are following in traversing terrain so that you are attached to the rope at more than one or two points. He is climbing El Capitan in this video.

How To: Practice running drills on a track

These are great running drills by Lauren Fleshman! They're useful for runners both sprinters, hurdlers and long distance runners. She talks about body position, range of motion, posture and gait. The karaoke drill is a sideways drill. The high knee drill is to recreate the perfect running position by using a knee lifting skip. It freezes your body frame in proper position and exploding with your back foot off of the ground.

How To: Paint on a model in Zbrush

This 3D modeling software tutorial is all about UVs and using them in Zbrush. Learn how to paint on a model and why it's important to use proper UVs on a model not just in Zbrush but in any 3D modeling package. Learn how to poly paint in Zbrush and use UVs to keep the resolution where you need it.

How To: Fit a wound dressing for a Wound Vac in nursing

Studying to be a nurse? Then here is a nursing how-to video that teaches you the basic of operation of a Wound Vac machine and the proper technique for fitting a dressing on a wound. Every nurse should know the basics of this technique, follow along and see how easy it is to fit a wound with a dressing to use with the Wound Vac. These medical tips are sure to help you pass your nursing exam with flying colors.

How To: Not suck at Photoshop and use the measurement log

Donnie Hoyle sizes himself up against some old memories. Size yourself up too by learning how to not suck at Photoshop and use the measurement log. The measurement log in Photoshop allows you to click and drag from point to point and take the measurements of things. In this example, you learn to use the measurement log to compare similarities and differences in the faces of a dad and his son.

How To: Do the bunny hop trick on a bicycle

Check out this cycling video tutorial to see how to do the bunny hop trick on a bicycle. Your BMX instructor for the day goes through the very basic steps with demonstrations on the bike bunny hop, along with some out-takes at the end to ease the pain of falling on your ass.

How To: Make a quick-fix pantyhose alternator belt

You're driving down the road and all of a sudden SNAP—your alternator belt just snapped. You're losing power fast and need a quick fix, but there's no mechanic in sight. If you have a woman in the car, you may have a simple quick belt replacement—pantyhose. That's right, some simple pantyhose can act as a makeshift alternator belt until you find a proper solution, i.e. a real alternator belt. Check out this video to see how it's done!