Properly Assess Search Results

How To: Prepare and use a Ouija board properly

This introductory tutorial video offers instructions on how to get the most out of a Ouija board. Beginning with casting a circle, it covers the use of protective herbs and symbols, the importance of having water to offer to the spirits and a candle to focus energy, how to invoke a spirit or demon, some important questions that should be asked when a spirit answers the call, what types of questions are best, and how to correctly banish the spirit or demon at the end of the Ouija board session...

How To: Throw a cast net the right way

First, you have to lay down your net and bundle up the rope in one hand like an extension cord all the way up to the net. Hold the net in the same hand, and grasp the rim of the net with the other hand. When you want to throw the net, grab the net midway with the rim in the other hand, and throw it towards your target with some spin, so the net lands flat on the water. If the net landed properly, it should sink slowly to the bottom, trapping some fish underneath it. To retract the net, simply...

How To: Prepare a subcutaneous fluids bag for your pet

In this video you are going to learn how prepare a subcutaneous fluids bag. . There are different types of fluids and different size needles. Your veterinarian will prescribe the proper setup for your pet. Dr. Mike, takes you step by step on everything you'll need to know and do to properly prepare your pets fluid bags. Remember, to always follow your vets advice and instructions.

How To: Wash and detail your car without ruining the paint job

Detailing your car keeps it in top shape and looking like new. By washing and detailing regularly your vehicle will impress passerbys every day. In this two part series, The Smoking Tire shows you how to properly detail your car at home without accidentally ruining your paint in the process. This can be easily done from home, and doesn't take much advanced skill. Check out this step by step and keep your car shiny, no matter how old it is!

How To: Do a concentrated hip extension

In this video, you are shown, you are shown how to properly do a concentrated hip extension. You are instructed to lay on the floor, supported on your elbows. With one knee on the floor, you are then told to life the opposite leg off the floor, completely extended, to form a horizontal line from the floor. While lifting the leg to about 40 degrees, you are to contract the muscles of the same glutes at the same time. After, return to the starting position, bringing your leg to form the horizon...

How To: Backup your entire computer for free using GFI Backup

Don't take the chance of losing all your important information on your computer. This video will show you the programs that you need to back up your computer. It will show you the best programs to use, to assure that your information is, indeed, backed up properly. This video has very extensive instructions, however, Gigafide has made it easy to follow their instructions easily. The best thing about this video is that it shows you how to do this absolutely free.

How To: Fit a horse shoe properly with Matt Bigwood

Matt Bigwood shows how to shoe a horse for proper fit. He concentrates on the trot to check for fit. His gait should be balanced and with no interferences on the horse from a shoe. The shoefitting is incredibly important for the horse's health. The imprint foot kit prepares the shoe. He uses an antibacterial to clean the foot, glue the shoe and then cool the shoe.

How To: Measure your foot & calves for proper shoe fit

This is a video guide for measuring your foot and calf size correctly. This is important in order to properly fit shoes. It's a video intended for athletes and individuals sensitive to their foot and leg health. This is brought to you by a retailer that fits wide or narrow feet with proper shoes. You'll need a wall and a measurement guide. Measure for both feet and sometimes you have two different sized feet.

How To: Tailslide a rail on a snowboard

Snowboarding: Hit the Slopes With Style There was a time when simply riding a snowboard made you the extreme guy on the slopes. But now, with more people strapping on a board instead of skis, the stakes have been raised. Fortunately, we've lined up this video tutorial to keep you on the cutting edge. See how to tailslide a rail on a snowboard.

How To: Clean an Apple Mighty Mouse scroll ball

Do you have a Apple Might Mouse? After a few months, you'll notice that your scroll ball probably isn't working anymore. Well, check out this video to get that Apple Mighty Mouse scroll ball up and rolling. This involves a little disassembly, if you're worried about your warranty. There will be some Mighty Mouse cutting involved. But a dirty mouse is a bad one, so why not do what it takes to maneuver on your computer properly?

How To: Fix a carbon fiber surfboard

Fixing your Aviso Carbon Fiber surfboard is just as easy as fixing your old poly surfboard. You can remove the drain plug. Dry it out completely. There is no foam to rot or wood to break. If fixed properly Aviso surfboards will keep all of there integrity. This addresses a puncture and a cracked and severely damaged rail.

How To: Put on a backpack properly

Fitclimb.com shows viewers how to put on a hiking backpack properly in this video. To begin, take the straps in both of your hands. Bend your knees, and keep your back straight. In this stance, pick the backpack up and set it on one of your legs, just above the knee. Put the arm that is on the same side of the body as the leg your backpack is resting on through the backpack strap. Put the backpack on your back, then put your other arm through the corresponding strap. Adjust the belt that sits...

How To: Open a champagne bottle like a pro

Chef Jason Hill tells us how to open a champagne bottle without much noise safely. Before opening the bottle make sure it is chilled to about 45 to 50 degrees. You can fill a bucket with half ice cubes and half chilled water and chill it for 30 minutes or you can refrigerate the bottle for 3 hours .When the bottle is chill remove it and dry it with a towel and carefully remove the foil with the wired wood intact. Grab the neck of the bottle with your left hand and place your thumb over the co...

How To: Use glitter mist to make a great scrapbook

Making a scrapbook with glimmer mist, allows you to create interesting effects for scrapbooking. Shake the glimmer mist properly. Instead of shaking it up and down, shake it horizontally in circles. If you shake it up and down, it forces bubbles into the mist, which is the cause of splattering. You'll see a tornado inside, if you are shaking it properly.

How To: Grow pineapple by planting the top

In this video, our author, ofenjen, shows us how to slice and plant a pineapple. First, find a pineapple: please don't get one too green or too yellow as they aren't ripe properly. Twist off the top of the pineapple with your dominant hand.

How To: Use hair rollers properly to curl your hair

The hairdresser in the video explains how to use hair rollers properly. He tells about two types of rollers, velcro, and heated rollers. Velcro rollers are advised for dry hair, because if you put them in wet hair, and let them dry you wont be able to get them out. The man in the video explains when applying velcro rollers, the section of hair should not be bigger than the roller itself, in length, and width. He tells you of a trick of his, to put your thumb inside the roller, as you roll the...

How To: Set a table properly

In order to set a table properly, you need to begin with the candles. Try using beeswax in your candleholder to hold your candle upright. Place the salad plate inside your serving plate. Every course should have its’ own silverware. Place the napkin on the left side. The fold of the napkin should be away from the plate.

How To: Properly set up a turntable

Paul demonstrates to viewers how to properly set up a turntable. Each turntable has the same basic parts, so this tutorial should work for most users. There are several components: the platter is the part that spins and it has a slip mat on top. The tone arm is to the right and it has a head shell and stylus cartridge (needle) mounted on the end. The queueing lever is at the base of the tone arm and it raises and lowers the tone arm base. There is also a VTA (Vertical Tracking Angle) adjustme...

How To: Perfect your toeside edging on a wakeboard

In this how-to video, you will learn how to get toe side leverage with this edging drill. This will teach you how to edge properly toe-side. If you are edging out in a bad position, this will cause you to use a bad position with muscle memory. If you edge out properly, you will reinforce a good habit so that you naturally use the position. First, stay outside of the wake. Remove the lead and grab your board shorts so you're forced to edge with your rear hand on the handle. You will have to ed...

How To: Properly take-off for a tantrum

Learn Wake demonstrates how to properly take-off for a tantrum wake board move. The tantrum is one of the easiest inverts to land but it has a more complicated edge than a wake jump or a back roll. It requires an edge change at the wake. Approach the wake on your heels so that the board is flattened before the wake and then switch to your toe side edge to pop the trick. First, practice the edge change and pop with no wake. Cut away from the wake, edge out towards the flats, flatten the board ...

How To: Properly sharpen the blade of a knife

In this Home & Garden video tutorial you will learn how to properly sharpen the blade of a knife. You will need a sharpening stone with two sides; coarse and smooth. You will use the coarse side if the knife has dents. You can use any oil, but Rem oil is the best for this. Spread the oil on the sharpening stone. Hold the knife so that the blade is flat and parallel to the surface of the stone. With the blade facing away from your body, start from the near end of the stone and as you move forw...

How To: Properly lace ice hockey skates

Dan Perceval, founder of the sport of Xtreme Ice Skating explains us in the video of how to properly lace ice hockey skates. It starts with the wax laces. There are different forms but he suggests heavy wax since it lasts long. These wax laces are used to grip the boots. We normally we use 120 inch if there is no wrapping around and it should be in excess if you wrap around. Now we start with lacing. You can start outwards or inwards in hole one. He prefers outward so he inserts the lace outw...

How To: Properly tape an ankle

In this how-to video, you will learn how to properly tape an ankle. This is important if you have trouble with your ankle turning. First, spray some pre-tape on the foot. Put on some Pro Wrap so that the tape does not tear the hair on your legs. Put some heel and lace pads on so that the friction of putting on a shoe does not cause blistering. Put in about two to three anchors. Do not use zinc oxide tape around the muscle, so place it under the muscle. Now, start the tape on the inside of the...

How To: Properly focus your video camera

This video shows you how to properly focus your video camera. Usually cameras have two focusing modes, manual and automatic. Despite the sophistication of modern cameras and their auto focusing modes, manual focusing still gives the person operating the camera the most control. To focus in manual focusing mode you must first focus your eyepiece. To focus your eyepiece fully zoom in on your subject, then rotate your lens' focus ring until the subject becomes sharp and clear. Finally rotate you...

How To: Properly cut an onion

Things you’ll need: Sharp kitchen knife Cutting board Onion Step 1 Leave the root side of the onion intact. Step 1 Leave the root side of the onion intact. Slice off the other end of the onion. Step 2 Remove the papery skin as well as the first layer of the onion. Cut the onion in half, and place one half on top of a cutting board with the side flat down. Step 3 Make a series of vertical slits in the onion from the root down, making sure not to cut through the root end. Leave about 1/2" at th...

How To: Debone a turkey

Mark Trick, a retail meat-cutting instructor, shows how to properly debone a turkey. Carefully peel the skin off the turkey. Make sure you do not tear the skin off. Flip the turkey upside down and cut the wings off by cutting towards the bone. To remove the body cavity, cut along the breast bone with the tip of the knife. Cut around the bone and neck of the turkey to leave as little meat on the bone as possible. Remove the bone. To debone the legs, cut along the bones of the leg using the tip...

How To: Winterize car tires

Use snow tires in the winter. Special patterns in the tread encourage the tires to grip the road better than regular tires. Snow tires are especially helpful if your car has rear wheel drive to discourage fish tailing.