In this video tutorial, viewers learn how to reupholster the seat of a chair. Begin by taking the seat off the chair and remove the staples on the back of the fabric. Remove the fabric and cushion, leaving you with the wood base. With polstry foam, cut the foam out 1/8" larger than the board. With wool batting, cut the batting 4" larger than the board and then staple it to the board. Finish it by covering it with some decorative fabric. Cut the fabric 4" larger than the board and staple it on...
This video discusses how to emboss using acrylic paints, like faux plastic.
Watch this three part tutorial to build a miniature ziggurat. Use pink Styrospan high density foam. Assemble this model of a step sided pyramid with a ruler, some glue and an x-acto knife. The pink foam is easy to carve and can be repaired with glue if broken.
In this video Hetal and Anuja are demonstrating how Ghee (clarified Butter) can be made out of unsalted butter. Ghee is a very important ingredient in Indian cooking. Also, since its smoking point is higher than butter, it does not burn very fast as butter does. To make ghee you have to take unsalted butter and heat it in a heavy bottom pan on a low flame. Keep stirring it so that the milk solids do not get burnt at the bottom of the pan. After about 20 minutes the butter is completely melted...
Poke, jab, and stab your opponent without taking out an eye. You Will Need
You can bet Thor costumes will be prominent among the superheroes seen this Oct. 31. Since the summer, there has been no shortage of coverage for Thor: Ragnarok, and the timing of its November release couldn't be better as a tie-in with the cosplaying holiday known as Halloween. This year, the success of pulling off the Thor costume will rely on how well your new Thor helmet looks, which as it happens, you can DIY at home, using a few simple supplies and perhaps a trip or two to the craft and...
Once upon a time in America, there was coffee and there was decaf. That's it. No capuccinos. No espressos. And certainly no Starbucks. Coffee was just coffee, something that you bought at a gas station or donut shop. If you made it at home, it was either in a metal pot or instant coffee.
Watch this video tutorial to see how to build a fun foam boffer sword! These boffer swords for any of your larping needs!
Olivia shows how to make ‘Woolen Mittens’ in this video, by recycling an old sweater! She begins by washing an old sweater in cold water. After washing, she puts the sweater in a dryer at high heat mode, to shrink it. The washed, dried and shrunk sweater is then placed on a table. The required length of the mitten is decided, taking care that the bottom end of the sweater shall be placed at the point where the mitten ends on the arm. The arm is then placed on the sweater and a mark is made ab...
Dana Plazyk shows how to make a beautiful ‘Christmas Bow’, in this video. All that is required to make this bow are the following:•A decorative Ribbon•Toothpicks•A rectangular piece of foamShe begins by making a whole twist, near one end of the ribbon. The twisted part of the ribbon is placed right behind a toothpick, fastened on a rectangular piece of foam. She then fastens the ribbon at that point with a second toothpick, to hold it in place. A small central loop is created on the free end ...
Make your own hoverboard prop from the Back to the Future movies! You can do this whole project for about twenty dollars. You will need a large piece of foam board, green posterboard, some Tupperware, a few pieces of hardware, scrap Velcro, metallic plastic and paint and brushes.
Make your own armor with a weathered look out of Sintra (or expanded PVC foam). You'll need a heat gun, a padded cushion, paper towels, rub'n'buff in silver leaf, a knife, a marking pencil, water and a can of spray primer. Trace your piece onto the Sintra, then use the heat gun to shape it. Useful for costumes, Halloween or larps.
This tutorial starts off by demonstrating the proper way to hold a boffer sword for greatest control. Once you've gotten that down, you're shown how you can go up against an opponent with a shield and still win, even if you only have a sword.
This Halloween makeup tutorial is great because it can be easily altered to fit the costume you're wearing. While the original look is intended for a sultry mermaid or a sexy swamp girl (yes, swamp girls can be sexy), you can wear this look with a bit of glitter for a forest nymph or fairy look.
Looking to create the look of a blockbuster Sci-Fi epic, for the price of a student film? This Indy Mogul Backyard FX video will show you how to build incredible looking science fiction armor out of foam for about eighty dollars. Be sure to follow these instructions carefully and be patient.
Becoming better at boffer combat is not a matter of mastering fancy sword moves, it's about being able to force an opening in your opponent's defenses and taking advantage of it without leaving yourself open for a counter-attack. This tutorial shows you precisely how to create these situations and take the most advantage of them.
Here's another fun summertime craft for your budding engineer - make a spinning paper pinwheel or fan! You'll need a C-battery, a toy motor, two soda caps, a popsicle stick, foil paper, copper wire, a small sheet of foam, a sharp pencil, a hot glue gun and some safety scissors.
Memory wire is kind of like memory foam, minus the comfort and all. A wire that takes on the shape you bend it to, memory wire is great for crafting wire bookmarks, pendants, and all types of jewelry.
Check out this clip before you head to any conventions this summer! In this video, learn how to create Lina Inverse's shoulder armor for cosplay and look great. You will need basic craft supplies and will be using things like duct tape, papier mache, tap lights and foam to build this piece of body armor.
In this video, we learn how to froth milk using a steam wand on a traditional espresso machine. First you will foam your milk then you will mix the milk. First you will pour your milk into a container and place it inside of your steamer and turn it on full power. The milk will start to foam and you will see bubbles rising on the top. Keep this going for about 30 seconds then tap down your milk two times. When you look at the milk, it will be a rich and creamy texture. You can add this to your...
Having a 1/16-inch unsealed crack around a window is like leaving that window open 3 inches. Decrease your heating bill and your energy use by sealing up air leaks. You will need caulk cartridges, a caulking gun, a putty knife, weather stripping and optional: expanding foam sealant. Tip: Caulking guns with an automatic release create much less mess than simple caulk guns and are well worth the extra few dollars.
Whether you want to commemorate a special event or just keep the dust off mementos, a shadow box is a great way to show off your treasures. Watch this howcast video to learn how to decorate a shadow box. You will need:
This is a quirky little how to video that teaches you how to repair and replace that worn out speaker surround you wanted to toss out or just bought at a garage sale for $1. Get to that yard sale and repair those old worn out speakers and make them worth thousands again!
In this video from "Pour by Ian - Amante Coffee Boulder, CO" we see a quick and easy way to make a simple Latte Art heart atop the coffee drink. Unlike some videos that tend to be long (and tend to only show off) this video is direct, easy to follow and fun to try.
Mike Lawson also "unmatches" the hatch on the Henry's Fork and elsewhere, but he uses a beetle imitation. A beetle is a good searching pattern when no fish are showing.
Yar! If swashbucklin adventure be yer fancy, check out this awesome Indy Mogul Backyard FX video to learn how to build a Pirates of the Caribbean style sword prop out of foam. This video explains what materials you need and what tools you'll use.
Remember how when you were a kid you used to make bedsheet tents and act out Godzilla scenes with your toys, pretending to put on a movie? You can totally do that for a living - though, admittedly, you're going to have to step up your puppets a notch.
This one is a twofer! The first part of the tutorial shows you how to make a fully functional alien egg out of papier mache and carpet foam. The second tutorial shows you how to make a ceiling mounted radial dolly.
It's like the hand turkey, but with a Christmas theme! Make a Rudolph the Red Nosed Reindeer with your children! You will need craft foam, pom poms, non toxic craft glue, markers, googly eyes, a paper back and safety scissors.
This is an easy craft, though it does take some time. Start with a soft ball of florist foam, and then attach balsam boughs. Keep it watered, and it will last for several months in your house. Add ribbons and flowers for decoration!
This is a lovely craft project you can do with kids - make a bunch of acorns that you can use as fall or winter decorations. You will need: small foam balls, mod podge, brown acrylic paint, glitter and brown yarn for the cap.
Serve your rolls and bread sticks in style! Take a basket and turn it into a Thanksgiving-themed breadbasket. You will need a basket, a glue gun, googly eyes, food safe skewers, a wooden spoon, scissors, colored construction paper and a block of florist foam.
Construct your own shield for use in boffer combat! This tutorial shows you how to construct your own large punch shield out of several layers of blue camp foam, a length of PVC for the handle, a measuring tape and some DAP adhesive.
Spear fighters can be intimidating, especially if you have built up a reputation as being good. This tutorial shows you how to best help your side if you're a spear fighter, as well as how to go up against someone else who is also fighting with a spear.
It's not a real Lal Mirch cosplay costume without the goggles! This tutorial shows you how to make the goggles from one of Katekyo Hitman Reborn characters from cardboard, posterboard and some craft foam. You'll also need some glue, a marking tool, scissors, a utility knife, goggles, headphones, tape and some paint.
Turn a left over wooden block into a sailboat! To make this craft, you'll need four rectangular wooden blocks and one triangle, three foam leaves, a BBQ or bamboo skewer, glue or a glue gun and scissors (and paint, if you want to paint your blocks a different color).
Teach your child how to tie shoelaces, and have fun at the same time! You can make a pair of paper shoes with laces by using recycled cardboard, foam leaves, a glue gun, a hole punch, scissors and, of course, a pair of shoelaces!
Water beads are gorgeous, luminous beads with surfaces that look like waves on a pond, teeming with various hues of robin's egg blue, sea foam, white, and deep navy blue. Water beads can actually be made yourself from clear glass beads.
Better your posture and relieve tension with the foam roller routine demonstrated in this Pilates lesson. With Pilates, as with any physical fitness system, a basic mastery of proper technique is essential for both maximizing the effectiveness of your workouts and avoiding accidental injury. Whether you're looking to slim down or merely tighten up your core, you're sure to be well served by this home fitness how-to from the folks at Balanced Body Pilates. For complete instructions, give this ...
Want to lay a hardwood floor yourself? It's easy. Provided, that is, you have all of the following materials: wood panels (preferably with built-in foam underlay), plastic sheeting, duct tape, tapping blocks, a hammer, a crowbar, a straight edge, a miter square, a pencil, string line, some spacers, and a saw. For complete instructions on putting it all together and installing your own custom wooden floor using panels, watch this free DIY guide.
