Pull Handles Search Results

How To: Remove & replace warped vinyl siding on your home

In this video tutorial, viewers learn how to remove and replace vinyl siding. Users will need a siding removal tool (zip tool). Insert this tool beneath the bottom edge of the overlap and pull down while sliding the tool horizontally. Remove the nails underneath and simply pull down the siding. Now measure the length of the siding. With the new siding, connect it on the exterior wall and reinforce it with some nails. This video will help those viewers who need to learn how to replace a vinyl ...

How To: Tie a bowline knot

This video describes how to tie a bowline knot in a few easy steps. To start, take a loose piece of rope in your right hand and make a loop about a foot away from the end. Then, take the loose end, bring it up through the loop you just made. Immediately after, wrap the loose end around the rest of the rope, and then bring it back through the loop and pull tight. Think of the loose end as a "bunny." Bring the bunny out of the hole, around the tree, and then back through the hole. Once you pull...

How To: Tie a surgeon's loop

This is a video shows you how to tie a surgeon's loop. You start with a large loop, and treat it as one. Then just tie a normal overhand knot, but instead after that you pull it through once more as shown in the video. Then pull both ends to tie the knot up. This is a very strong knot so it's a very good loop to know. Their website also has much more information on how to tie this and other knots.

How To: Operate the windshield wipers in a 2010 Prius

Toyota USA provides this quick video guide to show you how to use the windshield wipers in the 2010 Prius. If you want to control the wipers and washers, take the following steps: To operate the wipers, move the right hand stalk up for a single wipe, or move it down to activate the intermittent setting. Move the stalk down one more position to select a slow and constant wiper mode. One more down pull selects the fast wiper mode. Pulling the entire stalk towards you will activate the windshiel...

How To: Tie a dropper loop for fishing

This video teaches how to tie the Dropper Loop fishing knot. The presenter explains the uses of the Dropper Loop, then begins the instructions. First, make a loop in your line, remembering that the size of this loop will affect the size of loop you have when the knot is tied and sizing accordingly. Take the end of the line and make another loop that goes inside of the big loop and then wraps around the line 4 times. Now you have a big loop, and a length of wrapped line with a hole in the midd...

How to Play bass: Two handed tapping technique

This video is a bass lesson that demonstrates how to use a two-handed tapping technique often used by Eddie Van Halen and others on guitar. To do this on bass, you should put your middle finger over the top of your index finger to make a more solid tapping finger, and put your hand up the neck with your thumb on the back of the neck. Land your finger to tap, and pull to pluck the string. He places his left hand on the frets in anticipation of pulling the string with the right hand. He demonst...

How To: Shop for, eat & de-seed a pomegranate

First, when shopping for a pomegranate, you want to look for ones that are red and firm. You don't want a pomegranate that is soft or that is turning brown. A good solid red color is best. To eat the pomegranate cut the top off where the stem is. The pomegranate is divided into sections of red seeds divided by white stuff. Cut between the different sections of seeds in the white areas dividing the pomegranate into different sections. Pull the sections apart and pull the red seeds out of the s...

How To: Do a lying or prone quad stretch

Stretching the quads, or quadriceps, is important to warm up the large muscles of the thigh before exercise or sports. Learn how to do prone quad stretch exercises in this stretching and flexibility video. Take action: lie on your side, hold top foot behind butt, pull forward with quad, and pull back with hand. Tom Clifford, the instructor of this how-to video, has a degree in physical education, fitness and health from Eastern Michigan University, where he ran track and cross-country. Tom ha...

How To: Do a standing quad stretch

Stretching the quads, or quadriceps, is important to warm up the large muscles of the thigh before exercise or sports. Learn how to do standing quad stretch exercises in this stretching and flexibility video. Take action: maintain balance, hold top foot behind butt and pull forward with quad, while pulling back with hand, use wall for support, and hold 15 to 30 seconds. Tom Clifford, the instructor in this how-to video, has a degree in physical education, fitness and health from Eastern Michi...

How To: Pull Off the Exploding Egg in the Microwave Prank

This how-to video shows a practical joke that is super easy to do and no one will be able to trace it back to you. Prank someone and ruin their meal by rigging the microwave with a surprise egg. Follow along with this practical joke how-to video to learn how to pull off the exploding egg in the microwave prank. All you really need for this prank is a microwave, tape and an egg. Watch this video tutorial and learn how to play the egg in the microwave prank. Use this as inspiration for one of y...

News: TV Chefs Are Terrible at Handling Food Safely

The food TV chefs prepare make our mouths water. From one scrumptious creation to another, they fly through preparation without frustration or error. They make us think we can do the same with similar ease and delectable, picture-perfect results. Some of us have noticed, though, that these TV chefs don't always adhere to the same safe food handling guidelines we've been taught to follow.

How to Train Your Python: Part 9, Basics of Error Detection and Handling

Welcome back! In the last iteration of how to train your python, we covered loops, today we'll be covering something that I wish I had learned about much earlier in my scripting career, errors. We all run into them, and they can be frustrating, but there is also a silver lining to them. Today, we'll be discussing why some errors are unavoidable, and what we can do when we run into them. Also, this article will be more of a concept and less of writing actual code, but the information is equall...

How To: Carve a raw chicken for dinner and save money

Gwen Schoen and Paul Carras share with you in this video how simple it is to save money by carving a whole raw chicken. You can save your pockets an average of 20 – 30%! First take out any insides; this is usually the neck, heart and liver when included. Lay the chicken on its back and start with the wings. Break the skin with a boning knife and pull the wing away from the body until the socket pulls out. Finish the incision where the socket meets and repeat on the other side. Then you’ll...

How To: Tie your belt properly in martial arts

This video shows how to tie a karate belt. Take a double wrap belt, place the middle of it on your belly button and pull it around on to the back and cross the belt on the back. Take the layer on the bottom and tuck it underneath the top layer all the way around to the front side. Thus you can get a single layer of the belt on the back. In the front there are two layers-one coming up from the bottom and the second one is the top layer. Take the top layer and push it up from underneath the bel...

How To: Knit an I-cord

This video knitting tutorial demonstrates making a 3-stitch I-cord, so cast on 3 stitches. Use 2 double-pointed needles to make an I-cord. After casting on, instead of turning the work, slide it down such that the first stitch you will knit is at the opposite end of the stitches from the working yarn. Pull the working yarn across the back and knit three stitches. Now slide the work again, give the cord end a tug, pull the yarn across the back and knit three stitches. You need to add some tens...

How To: Tie braided line to leader

A recent trend in freshwater fishing is adding a fluorocarbon leader to your braided fishing line. The benefits of this are mainly allowing for some more absorbtion of pull, resulting in less twist and potential tangling. This how-to will show you how to tie this knot yourself, so when you're in the middle of that beautiful pond, and you feel the bite, you'll be able to successfully land that big one with less stress on you or your gear.

How To: Play a killer classic blues rock lick

Rip it up with this classic, blues rock lick, taught to you here by Robert Renman. This wicked riff, reminiscent of Gary Moore's playing style, uses lots of hammer-ons and pull-offs, which let's you play over 4 strings REALLY fast. Once you nail this, you'll officially be allowed to light your guitar on fire. Learn and shred now!

How To: Curl your hair perfectly with a flat iron

In this tutorial, we learn how to curl your hair perfectly with a flat iron. First, brush your hair out and then spray in some heat protector to all of it. From here, you will section your hair off into small sections and then heat up your iron. Now, clamp the iron to the root of the hair and then twist it 180 degrees. Slowly pull the iron down from the hair. The slower you pull the hair, the tighter the curl is going to be. When you release it, curl the hair with the finger and then move on....

How To: Curl your hair with perfect curls using a flat iron

In this tutorial, we learn how to curl your hair with perfect curls using a flat iron. First, pull your hair up so you are just left with the bottom area of the hair. Next, take a small section and place the straightener into the top of the piece. Wrap the hair around the iron and then pull the iron straight down to the root. Repeat this for all of the sections of your hair, until you have curled all of the different pieces. Take the top section down and then curl that. From here, you will be...

How To: Do a hippie hairstyle on your American Girl doll

In this video, we learn how to do a hippie hairstyle on your American Girl doll. To start, you will simply take the side of the hair and braid two braids into it. Pull these across the back of the head and then repeat on the other side of the head in the same exact braid. Next, you will pull these braids all together and then braid these together going all the way down to the bottom of the hair. Tie this off with a rubber band at the bottom. This will finish up your hippy hairstyle, enjoy and...

How To: Knit a scalloped edge

In this video we learn how to knit a scalloped edge. This forms a shell along one edge! First, attach your needle to the yarn on the right edge. Then, make a slip stitch and yarn over. Then, stick then needle through the fabric and yarn over again so you have three on the hook. Then, yarn over and pull through the first two loops in the hook. Then yarn over and go into the fabric and over again. Pull through a loop and then yarn over through all the loops on the hook. Now, do another one foll...

How To: Pierce your American Girl dolls' ears easily

In this video, we learn how to pierce your American Girl dolls' ears! Start out by taking a pencil and marking the ear where you want to pierce it at. Then, take a thumb tack and poke it through the ear where you marked it with the pencil. Then, pull it out and do the same process to the other ear. To help, pull the hair up in a ponytail so the hair is out of the way while you're doing this. Next, give the doll to an adult and grab a #42 drill bit. Put the drill into the same hole and then ge...

How To: Tease your hair to achieve a smooth bump

With this video, we learn how to tease your hair to achieve a smooth bump. To do this, you will need a small brush to help tease your hair. First, pull your hair up and then pull it forward. After this, put the brush in the hair and start to brush the hair down. Do this easily, but pile the hair up so it's a good foundation for a bump. Then, spray hair spray in the hair and let the hair lay down. Make sure you don't tease the very front of your hair, you will brush this down lightly to create...

How To: Do a cute hairstyle on an American Girl with layered hair

In this video, we learn how to do a cute hairstyle on an American Girl with layered hair. First, brush the hair back until it's smooth. Then, pull the front section of the hair back, going off from where the eyes end. Then, you will pull it up into a ponytail. After this, you will take a section from the side of the head on both sides. Then, you will bring these together in the back of the head and tie together with a ponytail holder. Now, take another section lower down on the had and repeat...

How To: Crochet a super fast 3 color granny square

In this tutorial, we learn how to crochet a super fast 3 color granny square. Start out with your first color on the crochet needle. Then, chain four and put the needle back into the first chain. Before you pull everything tight together, you will move your middle finger into the stitch with your thumb so when you pull it will wrap around your fingers. Then, chain three and do this over twice more to create the outlining area around the hole. From here, you will use two other colors using the...

How To: Tie a necktie into a bow tie

In this tutorial, we learn how to tie a necktie into a bow tie. First, place the tie around the neck so both sides are hanging down. Next, pull the thicker side up and the skinny side down. Then, cross both sides over and flip the large side over so it crosses above. Then, take the large side and flip it in, so it looks like the smaller side. Rill this up to the neck, then bring the other side around and tie it through the middle. Once you do this, pull the smaller side out and you will have ...

How To: Left-hand crochet a wide headband

In this tutorial, we learn how to make a left handed crochet wide headband. First, make a slip knot on the crochet hook and then make a chain of two. Next, wrap the yarn over and pull through once. Repeat this and then wrap the yarn over the hook, then wrap over and pull through once. Repeat this fourteen times to make the entire foundation for your headband. Once you have made this, you will need to repeat this on top of the first foundation several times until you have made several rows so ...

How To: Play bass guitar for beginners using open strings

In this tutorial, we learn how to play bass guitar for beginners using open strings. Get used to look at written notes. To do this, look at open notes on a piece of paper and work on your right hand technique. You won't be pulling straight up, your finger should be resting on the string. Pull it slightly backwards and feel the string vibrate. A nice and eve stroke will be perfect, do this for all the notes to get them to all sound the same. Then, combine looking at sheet music with your right...

How To: Build a simple house in SketchUp

This video tutorial is in the Computers & Programming category which will show you how to build a simple house in SketchUp. Start with the floor plan, draw a rectangular main living space and attach a small extra room. Next you use the push pull tool and pull the house up to as high as you want. You can make it 21 feet. Now draw the roof line in the center of the house along the length and draw the lines for sloping part of the roof on either side. Now grab the center of the roof and lift it ...

How To: Tie a bowtie left-handed

In this tutorial, we learn how to tie a bowtie left- handed. First, put the tie around your neck and adjust the two tails. The right should hang 1" lower than the left. Then, cross the longer over the shorter and push up over and through to make a simple knot. Form a bow with the back bow using your thumbs and fingers. Next, take the front tail and pull it behind the just-made bow to create the center of the full bow. Then, push the new one right through the knot in the opposite direction. Th...

How To: Edit quick shapes in Xara Xtreme

In this video, we learn how to edit quick shapes in Xara Xtreme. First, open up Xara Xtreme and select the quick shape option. From here, you will create the shape on your screen. Then, alter the number of spokes you see. You can hold down or select any nodes that you see. Pull these into the center and then it will create a thin star. Undo this and then hold down the control key while pulling in the center to create a twisting effect in the middle. All of these will look different and you ca...