In this video, the instructor shows us how to remove acrylic nails quickly and easily. First, remove some of the acrylic using a professional nail tool, you can find this online or at a beauty supply store. Next, take a big bowl of warm water and a small bowl of pure acetone. Soak your nail in each of these for a few minutes. After this, you should be able to gently push the acrylic nail off while it is still wet. Once you have removed the acrylic, brush your nail with cuticle oil to help pre...
In this video tutorial, viewers learn how to shoot a compound bow. It is deeply recommended that users who use a compound bow should have a release. Put your arrow on the string and push it in until you hear a click. Now hook the release into the D-loop. Your feet should be shoulder width apart and the tips of your feet should be on the target line. Now look at the target and pull back the bow. Your hand should be at the point of your jaw, arrow at the corner of your mouth and string on the t...
In this video tutorial, viewers learn how to perform the vertical or regular suplex wrestling move. Begin by setting up the move with a toe kick to the opponent and then wrap your arm around the opponent's neck with a light grip. Then put the opponent's arm loosely around your neck. Grab the opponent's attire as they hold onto your hip. Then both you and your opponent need to crouch together and push up. This video provides a visual demonstration for viewers to easily follow along. This video...
In this tutorial, Topman shows us how to wear an over sized beanie. One great way for a guy to wear an over sized beanie is to bring the beanie and drag it all the way down on the back of the head. Pull it further than you would any other beanie and it will look great. You can let your side hair and bangs come out of the front if you want to have a different look. You can use this with any color of beanie and you can also do it whether you are a guy or a girl. Make sure when you pull the bean...
In this how-to video, you will learn how to make a repair in cut leather. This is useful if you have damaged leather you would like to repair yourself. Make a knife cut in the leather, and then cut and place a sew patch into the leather. Push it underneath the leather. Now, glue the sew patch in place with inexpensive craft glue. Rub it around the leather and edges of the cut. Wipe off excess glue with a damp cloth and wait until it dries. Place something heavy on it for a good amount of time...
In this tutorial, Artbeads gives us a tip on how to open and close jump rings on a bracelet. First, take a pair of chain nose pliers and hold one side of the jump ring. Then, take a pair of needle nose pliers and pull the other side of the jump ring. Twist the ring by twisting side to side with the pliers to open and then attach your charm. Don't open any other direction, this will cause the jump ring to become weak. Close it by pushing it back in the same side to side manner. Repeat this to ...
TipsFromXOXOSarah takes us through a step by step instruction on how to get Taylor Swift's up-do from her song, "Love Story." With hair parted to the side, she begins with curly hair and gently swoops it in the back with a large bobby pin making a messy bun. She leaves a cluster of curly bangs hanging by the right side of her face. The loose curls left around the back of her head from the messy bun are then put up with a few smaller bobby pins. She then pushes up the bun up and bobby pins it ...
A small section of the hair is taken and separated into three parts. It is then braided nearest to the end. The centered hair of the three is held. Then there is the pushing up of the other two side hairs. This creates a design. Hair pin is used to attach the designed hair to the side of the head, leaving the end not platted. The remainder hair is grabbed into a side bun. The bun is loosely platted and crossed with hair pins until held firm. Parts of the bun are slightly pulled to create a me...
How to do a loud fingerless whistle
In this video, Josh shows us how to clean dirty pennies with ketchup. You will need, a timer, ketchup, a dirty penny and a penny. First, pour ketchup into your cup or dish. You don't need a lot of ketchup into the cup, just enough to cover the pennies. Next, push the penny into the ketchup so it's fully covered. Now, set your timer for 2 full minutes. When the timer goes off, take your penny out of the ketchup. Place the penny onto a paper towel and wipe it off until all the ketchup is gone. ...
In this video from sethd85 we learn how to brew coffee with a French press. For this you need coffee beans, a French press, something boil water in, and water (filtered preferred), and a coffee grinder. First boil water. Now use 2 tablespoons of coffee beans and grind them up in a grinder. You want the coffee to be very coarse. Now pour in the ground coffee into the French Press. You want a bit of a gap between the plunger and the coffee grounds. Once the water is boiled, pour the water into ...
In this tutorial, we learn how to set rhinestones using a Bejeweler. To do this, you will first need to prepare your Bejeweler and the fabric you are using. Lay out the pattern on your fabric and use tape as a guide for any letters you write. The rhinestones may move during this, just push them back in with tweezers. Once the Bejeweler is plugged in, rest it in a stand since it will become hot. Once it's ready, place it over an individual rhinestone for around 15 seconds. When time is up, lif...
How to caulk the baseboards in your home
How to remove acrylic nails with a soak
Fetch is an FTP program for Macs (Smart FTP can be used if you don't have a Mac). These can be downloaded from Download.com
Learn how to make a River Bar bracelet, which is also known as a Paracord bracelet, by following the steps outlined in this video tutorial. To start your bracelet, you will need to tie a reef knot. This is done by taking two loops (in two different color strings) and then placing one loop within the other, pulling this through the first loop to secure the two loops together. This knot creates the end of your bracelet. To actually make the River Bar design, bend the two colors of string so tha...
In this video from Prolite we learn the right way to tie your ice skates and keep the laces tight. First you need a lace hook. It's a metal piece that helps you lace the skates. With the skate on and the laces loose, pull tight on the laces just enough so it's a little tight. Now take the lace hook and start at the bottom. Put it underneath both laces and pull tight. Keep doing this as you go up the skate. As you pull tight with one hand, with the other you put one finger where the tension is...
The commentator tells viewers they will learn how to make smoke from their fingertips. First you must tear the strip off of a matchbox. Then place the strip in an ashtray, facing upside down. Light the strip on fire and let it burn for a little while. Push the burned strip to one side of the ashtray and there will be a brown-yellow residue left in the bottom of the ashtray. Wipe the residue off with one of your fingers and then proceed to rub your fingers together. Smoke will then come from y...
1. First remove the Electrical connections by release the button to unlock them without pull them harshly. Gently remove the Bolts to make loose and take out the spark plug coil.
This video shows how to make a tiny sunflower from polymer clay. Start with some yellow clay and roll it out using a pasta machine using the number 1 setting on the pasta machine. Wilton cake decorating supplies makes a flower shaped cutter that is designed to cut pieces of fondant, but works well for polymer clay. Make some of the flower shapes and even out the cut edges. You can texturize the flower petals so they are not left completely smooth. Add a piece of brown clay to the middle of th...
The girl in this video demonstrates the way of making a LEGO crossbow at home. She first shows you what all pieces that you require for the process. Then she asks you pick up the rod-shaped piece and stick it to the back of the spark piece. Then you have to put the two tiny pieces together as shown by her. Then she asks you to attach this piece to the stick and push it all the way to the end touching the spark piece. Then you have to stick the two horn-shaped pieces to the sides of another pi...
This video shows you how to do a back hand spring reverse rebound/step out. The first thing to do this is to learn how to do a handstand snap down. Which is a handstand but quickly come back down. The next thing to do is put one foot down and cross the other foot behind it then twist your body in that that direction. After that you do a back handspring which is a back flip but you put your hands on the ground and push yourself up thin twist the other way. Then you just combine them together a...
This is a great simple video, which will show you how to properly use a glass cutter and runner. The very first step is how to hold the glass cutter, you want to hold it at a 45 degree angle straight on the glass. Make sure to try your best to avoid leaning it to the left or right and at a 90 degree angle, and also make sure to start off the glass before cutting. Depending on your preference you can either push or pull the cutter, it doesn't matter which way. Once you make the cut, take the r...
In this video tutorial, viewers learn how to tie a fly fishing line to the backing. Users will need a nail knot tool. Put the backing into the tool, leaving about 6 inches sticking out. The wrap the line around the tool 5 times, pushing the loops together. Take the end of the line and run it through the groove of the tool. Put the fly line through the other end about 2-3 inches. Then hold the loops in your hand, remove the tool and pull on the backing to tie it. This video will benefit those ...
This video shows how to make an earring holder. You will need a canvas and some acrylic paint. Paint the entire canvas including the sides. You can paint it a solid color, or paint any design you like. Use glue to attach some glitter, or use puffy paint or glitter glue to decorate the earring holder. When the paint is dry it is ready to use. Simply push your earrings through the canvas. If you have earrings that are delicate, you may want to use a nail to form a hole in the canvas before plac...
The man in the video teaches a very helpful massage routine to help relieve constipation. He explains where and how hard to put pressure on the area. He even goes to explain that where the fecal matter is pushed through the abdomen. The video also shows a very good demonstration by using a patient. What you want to do, is start with very easy low pressure. You then gradually increase in pressure. He explains that you want to start with the sigmoud part of the colon, just around the hip bone. ...
In this video, Richpin demonstrates how to replace the camshaft sensor in a Nissan Altima. The cam sensor is located by the cylinder box. First, remove the electrical connector off of the sensor. Push up on the lock on the bottom of the sensor to pull back and remove the connector. The sensor is held in by a bolt so remove the bolt with a ratchet wrench. Next, pull out the sensor. Wiggle it to remove the seal of the o-ring. Rub the residual oil on the new sensor's o-ring. Then, slide the new ...
For this to work, you will need to take your pan through a process of heating and cooling. You put it on the stove, start the heat and apply a thin layer of fat on it, with a napkin or brush. This will open up the pours of the pan. As the fat becomes to burn and the pan heats even more, place it on a lower setting on another part of the stove and continue to apply fat. This process repairs the pan, as it pushes the rust away from the pores, so you will have a stronger pan in the end. This wil...
In this video tutorial, viewers will learn how to use a chop saw. A chop saw is a power tool which is typically used to cut hard materials. This saw can cut pieces at different angles. When cutting any material, make sure it is pushed tight against the fence. Hold the material tight in this position and make sure it is correctly leveled. When using this machine, be sure to wear safety glasses or a face guard. Avoid cutting small pieces of material and go at a slow pace. This video tutorial wi...
If you're in the market for a new lawn mower, there are plenty of options, and it might be hard making a decision on which one is right for you. This video breaks down what you need to consider before buying a lawn mower and how to find one that best fits your needs.
Normal pronation is when running your foot hits heel first, then toe, then pushing off with the inside of your toe. It is usually found in runners who have normal arches. This type of running ensures that all of your weight is moving forward with little wasted motion. At the end of your stride your forefoot should be slightly angled away from your body and when your foot lands there should be a very slight angle between your foot and leg. You can check the wear on your shoes to tell if you ha...
Dan "The Lobster Man" Zawacki demonstrates how to make campfire lobster tails. First, quarter lemon halves. Then, butterfly the lobster tails by pushing on the tail. Use shears and cut the underside of the lobster down the middle. Flatten the tail a little more and use a knife to slice the lobster open. Pour clarified butter onto the lobster meat and squeeze lemon juice onto it. Butterflying the lobster will make it cook a lot faster in its own juices in the shell. Wrap the buttered lobster t...
How to do country and bluegrass chord strumming. A step by step video tutorial that will help you to develop your ability to do bluegrass strumming. Andrew Wasson of CreativeGuitarStudio responds to a viewers request to give a beginners lesson on learning a variety of strumming techniques. Andrew guides you through a short 12-bar country rhythm guitar part that keeps the rhythm simple. This style of music is centered on a consistent push on the feel. He focuses on rhythm. He begins by giving ...
Eric with Real World Green explains how to make your lawn more environmentally friendly. First, let your grass go dormant in the summer and don't water it as much. When you mow your lawn, consider using a push reel mower. A mower with a gas engine pollutes more than modern cars do. If you are going to use a gas engine mower, keep the blades sharp for a more efficient job. Use a mulching mower, because yard waste takes up a lot of space in landfills. Consider tearing up some of your lawn and p...
In this video tutorial, viewers learn how to do a body weight workout for beginners. Body weight workouts are recommended for those viewers who don't have access to a gym and would like to exercise. Body weight workouts require no equipment, only the mass of your body. Users work 30 seconds on each exercise. The body weight exercises are: wide squat, plank, split squat, side plank (both sides), hip raises and extending legs and push ups. This entire workout targets the glutes, abdominal muscl...
Here we see how change a flat tire on a bicycle properly. The video says that once you understand the principles you should be able to do this in three minutes. With the tire off the frame of the bike, be sure all of the air is completely gone. Next is to take off one side of the tire, with some plastic pry tools made for bikes. With the bead of the tire over the rim you should be able to remove that tube with ease. Inflate the new tube just enough so it takes shape. The new tube goes into th...
A standard tile cutter will cut ceramic and porcelain tiles but not natural stone tiles. To use the standard tile cutter adjust and lock the guide. Then, slide your tile into position in the tile cutter. Next, position your cutter on the edge of the tile. Push down on the cutter while sliding the cutter across the tile. When the cutter gets to the end of the tile, press down. The tile should then break into two smooth, clean pieces. Run a tile file over the edge of the tile to reduce the shar...
In this video from fatlosslifestyle we learn how to get a smaller waist and to burn belly fat. In this exercise he is lying down, bending the knees. You are creating a vacuum in a sense. You take a deep breath in forcing your belly button to push up towards the ceiling, then as you blow the air out, feel your belly button going down. When you have 3/4 of the air out, hold your breath, and suck in through your throat with your breath being held. Visualize your organs going up into your diaphra...
This is a demo showing how to do Stretching & Flexibility Techniques for Fat Loss, Muscle Gain, & Athleticism. It includes pull ups with proper stretching on the shoulder, triceps, biceps and abdominal muscles. Try to keep your vertebra straight and erect while doing any type of exercises. Push-up exercises may built your chest as well as your biceps muscles. Also, it may improve your abdominal muscles. You can also do hamstring and calf muscle exercises lying down on the floor and by stretch...
In this video tutorial, viewers learn how to perform the best six pack abs exercise. In this video, viewers will be performing the plank and side plank exercises. Users should be straight and have hips pushed down. Pull the belly button up, squeeze the pelvic muscle high, point the chin down and squeeze in stomach. Hold this position for about 30 seconds. On the side plank go in a straight position, squeeze, pulse up and feel the oblique muscle. This video will benefit those viewers who want ...
