Re Form Search Results

News: Whats Happen if You Mix Red Bull & Milk?

Casein is a protein that is found in milk. Groups of casein normally float around in milk without bonding. These groupings have a negative charge. The acidity of the Red Bull causes the negative charges on the casein groupings to become neutralized. Instead of pushing each other apart, the casein starts to clump together causing the milk to curdle and form solid matter.

How To: Alternating Half Hitch

The Alternating Half Hitch is tied to form a chain, also called a sennit. Other name of this knot is the Chain Stitch or Zig-Zag braid. This knot can be used to make a simple bracelet or necklace and other items can also be made with this knot.

How To: Crumb coat a cake

Leif Hanson for the Betty Crocker Kitchens shows how to crumb coat a cake. This is when you put a thin layer of frosting on the cake to hold the crumbs in. She starts with a square cake with exposed edges. First, you take a big scoop of frosting and put it on top of the cake. Next, you spread it around with a spatula. As you spread it evenly you want it to go over each edge and corner, but don't let the corners sag. Next, she loads the spatula, fills it from the top edge to the bottom edge, w...

How To: Make an egg, bacon & croissant out of polymer clay

Gentleman Bunny takes his viewers through a polymer clay breakfast preparation that combines the best of both worlds: visual appeal and no calories! He starts off by making a croissant out of a strip of clay. The clay is rolled between the fingers and then twisted to resemble a light and flaky croissant. While this is "baking", the polymer clay egg is made. A piece of white clay is formed into a round, similar in look to a fried egg white. A dot of yellow is then placed over the white and a p...

How To: Make a round bead cage

This video clip from The Crafts Channel shows how to make a bead cage. A bead cage is where a piece of wire is wrapped decoratively around a large bead. For the example bead cage .8 mm wire was used. If the wire is too thin it will not hold its shape, but if it is too thick it will be hard to bend into the desired shape. Take some needle nosed pliers and make a complete circle, and then use some flat nosed pliers to begin forming a spiral going outwards. Now do the same thing beginning at the...

How To: Make a strawberry cheesecake from scratch

In this video, Chef Jay shows how to make strawberry cheesecake from scratch. You will need 1 c sugar, 1 tbsp corn starch, 1 tbsp vanilla, 3 large eggs, 1 stick butter, 8-10 large strawberries, 2 (8 oz) packages of cream cheese, 2 c sour cream and 2 c graham crackers. You will also need a small sauce pan, spring form pan and large pan. First, put room temperature cream cheese and sugar into mixing bowl and cream them together. After this, add the eggs in one at a time then add vanilla, corn s...

How To: Simplify exponential expressions via the quotient rule

This video demonstrates the quotient rule as applied to exponential expressions that appear in the form of, to use the word loosely, a fraction. The name, "quotient rule", refers to the fact that it applies to expressions which are divided by other expressions. The video begins by explaining that the quotient rule allows expressions in this form to be simplified if they contain like bases (i.e., the terms are of the same variable). The quotient rule allows the expression to be simplified by s...

How To: Make your own duct tape hair bow

This video tells us the method to make a hair bow from a duct tape. You will need a duct tape, scissors and a bobby pin for this purpose. First take a sufficient length of duct tape. Fold it along the breath so that the sticky sides stick to one another. Now we get a duct tape in the shape of a rectangle. Fold the duct tape along its length. This forms a crease at the middle of the duct tape. Fold each half of duct tape along the length to the crease at the middle. This forms two creases at t...

How To: Make a mini polymer clay kitchen pot for a dollhouse

To begin you need to have a metal hollow tube made up of a strip which is around one inch wide and about two inch in length and has been bended round. Now take some clay and put it inside this hollow tube on a table. Press it with your finger. Take a glass tube with lid and use it to press the clay down to form a pot with this clay. Now remove the both the glass tube and the metal tube. Put the clay pot again back over the lid of the glass tube and press with your fingers. You have to press s...

How To: Clarify and preserve butter

Looking for a means of preserving a pound or so of butter? Make delicious ghee, or South Asian-style clarified butter. The clarification process is simple and only takes a few minutes. Become a veritable ghee whiz with help from this South Asian culinary how-to.

How To: Make a paper box in under 5 minutes

This origami box looks rather simple to make. You take a piece of paper and fold it into a triangle. Be sure to make the fold visible to see. Take the extra piece from the triangle and fold it up so as to form another crease. This extra piece will be removed in order to create the box. After you remove the extra piece refold the paper along existing fold to reform the triangle. Then fold the triangle in half, making sure that the edges meet perfectly. Then unfold the paper and take the corner...

How To: Make a paper gift box

To make a paper gift box is one of the simplest projects that you can create on your own. In order to do this you need some materials: a Square of Paper, a Pencil, a Ruler & a Folding Bone. Take any size square of paper and draw two lines diagonally from corner to corner. This will form a large X, marking the center of the square. In turn, fold each corner into the center of the square. Firmly crease the fold. Fold the first corner to the line of the first fold made on the opposite side. Repe...

How To: Make a chain mail bracelet

You can learn to make a beautiful chain mail bracelet by watching this video. The bracelet is easy to make and affordable too. Start by sliding two silver jumper rings onto a paper clip. Two copper jumper rings are passed through the silver rings and twisted to complete the loop. Next, two silver rings are passed through the copper rings and twisted to complete the loop. Next, place the silver rings on either side of the copper rings and pull them up from between the copper rings, as shown in...

How To: Look younger with facial exercises

In this video from Sigsac from Happy Face Yoga, we learn how to look younger with facial exercises. This demonstrates the cheek lifter. This exercise will strengthen the muscles of the cheek. Smile, open mouth and form an O. Fold upper lip over teeth, smile again to lift cheek muscles up. Place index fingers on the top part of cheek, directly under eyes. Relax cheek muscles to return to original position. Smile again to lift the cheek muscles back up. Do this 10 times. In the next exercise he...

How To: Make paper flowers with a paper shaper punch

The video shows the viewer how to make 3 paper flowers. The first seconds show the paper flowers (two blue and one pink) and a lady voice says she will show us how to make them using a Paper Shaper Punch. Then she presents the tools: the paper shaper punch (with the large daisy), paper of 2-3 different shades (one of them green), mini bonds, a toothpick and optionally wire cutters and a button, wire. a jewel etc. She shows the blue flower that has a blue jewel in the middle, two layers and a ...

How To: Find the equation of a line easily

This is the video about how to Find the equation of a line. The equation of a line with a defined slope m can also be written as follows: y = mx + b where m is the slope of the line and b is the y intercept of the graph of the line. The above form is called the slope intercept form of a line. Step1 Set m to a fixed value (m = 1) and change b (b = 1, 2, 3, 4, -1, -2, -3, -4). Compare each value of b to the y-intercept of the line obtained. Step2 Set b to a fixed value (b = 1) and change m (m =...

How To: Fold a modular origami star

In this video you can learn how to fold a modular origami star. Create four quadrants of the star point. Crease and unfold the first square origami paper in half both vertically and horizontally, making four equal quarters. Set the creases. Fold precisely each corner of the square in towards the center point. Run a pencil or straight edge over the creases to set. Complete a triangle star point. Hold the paper at an angle to resemble a diamond shape. Take the left center point and fold it to t...

How To: Do different kinds or balloon twists

Mike Floyd demonstrates how to twist balloons into amazing shapes in a simple, and straight-forward manner. Inflate Balloon about 3/4 of the way and tie end. Next, make one twist at mouth of balloon, which creates a "sausage" twist and sections the balloon. All other twists will stem from these twists. Hold each section of balloon, and twist the longer section at about the same length as the first "sausage" twist you created earlier in Step 2. Now fold the 2 smaller "sausage" twists over the ...

How To: Start a fire with a single match

This how-to video is about how to start a fire with a single match stick by Shannon Davis. This video is really helpful especially for those who are going for trucking. If we get struck in the middle of nowhere and if we are in a situation to spend the whole night in the forest definitely this video is very helpful. Before we begin to start a fire we need to gather wooden sticks of different sizes varying from tiny tender straws to hard wooden sticks having thickness of our wrist. First we ne...

How To: Wrap a sprained ankle

Assemble the necessary equipment: a roll of 1- to 2-inch-wide athletic tape and a pair of scissors. Wrap one piece of athletic tape under the heel of the foot and bring both ends up the ankle to either side of the leg. The tape should form a "U," like the stirrup on a horse's saddle.

How To: Build a drill press table for your woodshop

It is not that hard to make your own drill press table. Start with a 3/4-inch piece of plywood. Cut a 3/4-inch dado cut on both ends of the 3/4-inch board about two inches from the end. Top the 3/4-inch plywood with a 1/4-inch piece of oak cut into three pieces. When you cut the board into three pieces cut the center piece out with a 10-degree angle so that when you glue the two end pieces down the center piece will slide in and out but be held in place by the angle. This allows you to change...

How To: Get a Canadian work permit

To obtain a work permit, you must first have a job offer from a Canadian employer. To get a job offer, you can apply directly and send your resume to a perspective employer, use an employment agency, or post your resume on employment websites. Next, you must have a labor market opinion. To get an LMO, you have to fill out some forms and submit some supporting documents. This process can take from a few weeks to 6 months to complete. After the LMO is approved, you must then apply for a work pe...

How To: Apply for ESTA registration for travel to the US

This is an electronic travel authorization system used to gain travel authorization to the United States. There are certain countries that fall under a visa waiver program, meaning that you do not need a visa to enter the US to visit. In that case you use the ESTA system. The countries that qualify in the VISA waiver program include Andora, Australia, Austria, Belgium, Brunei, The Czech Republic, Denmark, Estonia, Finland, France, Germany, Hungary, Iceland, Ireland, Italy, Japan, Latvia, Lich...

How To: Get permanent residency in Canada through CEC

The CEC, Canada Experience Class, is a new program to help a person who has held residency in Canada gain permanent residency status. The program realizes that, by going to school or living in Canada while working, many people have the skills necessary to make the transition to live in Canada permanently. To qualify for CEC, you must be a temporary worker living in Canada for at least two years with two years of skilled working experience. A second way you can qualify is by being a foreign gr...

How To: Get a Canadian citizenship card

The citizenship card is a document that naturalized Canadian citizens use to prove that they are Canadian citizens. This card is needed to get certain documents such as a Canadian passport. It never expires but it can be updated to include a new picture or name change. Citizens born in Canada do not use the card, they use their birth certificate to prove citizenship. Naturalized citizens can apply for this card and so can people with parents of Canadian descent. People who have previously had...

How To: Make ricotta meatballs

This video is about making ricotta meatballs. Instructions: 1. In a large bowl, add the pork, Italian sausage, prosciutto or pancetta, bread cubes, parsley, oregano, fennel, red pepper flakes, and salt. Use your hands to mix until the ingredients are evenly distributed. Do not over-work.