In this tutorial, we learn how to remove a stuck freewheel. First, take your crescent wheel and place it on the outside piece of the wheel axle. After this, use a wrench to remove the bolt that is around this, using a big push to help it get out of place. This should be pretty tight, but will come out eventually. Now, place a wrench in the vice and rotate the wheel counter clockwise. When this is finished, you can put the parts back onto the wheel. When finished, the parts should be free to t...
In this tutorial, we learn how to change a bike tire or tube. First, you will want to take the wheel off of the bike entirely. Then, remove the cap from the wheel and take off the nuts. Release any remaining air, then remove the retaining washers. Now use a lever to remove the wheel and tube from the rum entirely. Once you do this, grab your new tire or tube and inflate it slightly. Next, you will place the tire on and then insert the tube underneath it. Once finished, inflate the tire and th...
In this tutorial, we learn how to change a bike tire with CO2. First, you need to take the tire and wheel off of the bike. Then, release the air from the tire and then remove it from the wheel. After this, use a lever to remove the inner tube from the wheel as well. Replace this with a new tube and tire, then apply back onto the wheel of the rim. Line this up on the bike to place it back on, then screw all the parts back on. After this, tighten up your brackets and chain then you will be read...
In this tutorial, we learn how to adjust a rear derailleur on a mountain bike. First, get on the bike and start to ride it like normal, except have it mounted into one place. Then, shift the front derailleur into middle gear and the rear derailleur to the smallest gear. After this, shift back gear up one gear while pedaling. If it hesitates going up to the next gear turn the barrel adjuster counterclockwise until it moves smoothly into gears. Do this again through each step until it shifts sm...
The Chevy Tahoe isn't the most reliable vehicle, bless it's heart, and home maintenance skills are a must if you're going to enjoy owning one. If you're replaced the rear brake backing plates recently and noticed the E-brake not working after that, watch this video to learn whether you lost the pin under the adjuster pad and that's causing the problem.
Starting with just a lump of clay and some water on a potting wheel, you can end up with a lovely clay pot! This video shows you how to make a trivet, so you can safely rest hot dishes on your table or countertop.
Thatch is the material that is left over after your mow your lawn, and this old dead material can build up and ruin your lawn's health. This video will show you how to use a rear-attachment dethatcher for a riding lawnmower to dethatch your lawn, leaving it the picture of health that you want in front of your home.
In this tutorial, we learn how to change a bike tire with a quick release wheel. First, put your chain down and release your brake. Now, take your wheel off and then pull the tire off. Now, take the tube off by using the tire lever and pushing away from you. Don't hurt your fingers on the spikes. After you pull the tubing off, put the new tire back onto the rim by rolling it on with your fingers. Place the tubing around the tire after this, and inflate it. Now, place the wheel back onto the b...
In this video, we learn how to install a cog cluster/cassette on a wheel. Find the wider gap and wider spine and line them up. Then, slide the cassette down onto these. After this, you will have to install all of the clusters onto the top of it. If you need to, install spacers as well so your wheel doesn't get messed up. Make sure you use grease to install the cluster and cassette so your wheel doesn't squeak and they go on easily. When you are finished, take your bike out for a spin and enjo...
With so many cars, vans, and suvs storage is important as ever. Taking seats out used to be the only way you could ever get enough space for big bulky objects, but thanks to innovation and some smart people, it's easier than ever. And you'll see just that in this tutorial for how to use the rear stow'n go on a 2010 Dodge Grand Caravan. Good luck and enjoy!
The p knuckle of the rear derailleur is a small part that regulates the tension of the chain running over the derailleur. This video features a professional bike mechanic installing the p knuckle into a rear derailleur during an overhaul of the derailleur. This is an important piece of maintenance even for new equipment, so take note!
The cable that connects your rear derailleur to the shifters on your bike may seem too long, delicate, and complex to fix yourself. You may be right, but if you have some bike maintenance experience and want to try then this video is for you. It walks you through the whole process of replacing the cable in your rear derailleur. It is a long process, and elaborate, but will dramatically improve your shifting performance if your cable is old and worn.
Adjusting the rear derailleur on a bike is an important way to fine-tune your bike's shifting performance, but is complicated and can vary in method and effectiveness depending on the brand of derailleur. This video features instructions on how to adjust a low-normal rear derailleur using the adjustment screws.
Most rear derailleurs are high-normal, which means that they default the chain to high gear. Shimano derailleurs, however, are low-normal, defaulting to the lowest gear on the bike. This video details how to adjust a low-normal derailleur into normal cable tension. This works very differently than on a normal bike, so make sure you pay attention!
The derailleur is an important, albeit French, part of most modern bikes. This video features a professional mountain bike mechanic demonstrating the installation of a rear derailleur on a mountain bike. It is a short video, but detailed enough that any DIY bike mechanic should be able to do it themselves.
If your iPod click wheel needs to be replaced, don't fret. This "how-to" video teaches you a quick and easy way to fix it. In no time you'll think yourself to be an apple expert, and able to enjoy your music and videos again. This tutorial works best for fourth, fifth or sixth generation iPods.
This video explains how to adjust a rear derailleur using the limit screws in a bicycle. There is a limit screw which has low and high gear. When the limit screw is turned in, the pulley moves inboard and when turned out, it moves the other way. The derailleur moves along with the inboard. When turned in, it travels with the inboard and holds the chain. Care should be taken not to turn much deeper as the derailleur might throw the chain off. The viewer will get some useful information upon wa...
Do you want your house to look dull or colorful? If the latter, then be sure to check out this video to learn how to best utilize the color theory.
Sick of those training wheels on your bike? Take the next step and get rid of them! Check out this video tutorial on how to ride a bicycle without training wheels (for kids).
Make your board your own by tailoring it to your skating style. You Will Need
Riding a skateboard can be a blast, but not when your skateboard gets hard to handle because of dirty bearings. Here's how to keep them clean. Watch this video to learn how to clean skateboard bearings.
One day, your car may break down and you won't be able to afford to hire a mechanic, so what do you do... you look on the web for some how-to vehicle repair videos and become your own car mechanic, that's what. You don't need any advanced training to perform repairs and simple maintenance on your automobile, but you may need a few tools. Invest in the basic tools and you'll be prepared for just about any car malfunction you can think of. These tutorials will help get you on your way, as long ...
Learn how to install a Star Rotor rear rotor to your motorcycle. The motorcycle used is a Triumph Street Triple.
This tech tip demonstrates advanced rear derailleur adjustments in order to achieve proper shifting.
This video tech tip shows you how to adjust the rear derailleur in order to achieve proper shifting for your bike.
John Ward is a one-man museum of old bikes and techniques. This short video clip shows him performing a rear peg mount on his old Sunbeam.
This two part tutorial shows you how to install the rear midbass speakers and rear tweeter speakers in a '99-'06 BMW 3 series/M3 (E46) convertible.
Install of the RRS 3 link rear independent suspension set up in to a 1964 Falcon wagon.
Dan from submissions 101 demonstrates a Jiu Jitsu rear choke escape from the ground.
This video demonstrates the rear hook knee technique in Muay Thai kickboxing.
When creating loops, or even playing the keyboard, you're going to end up using your pitch bend wheel on your midi controller. And don't diss the pitch bender, Stevie Wonder used it, and that guy is richer than you! If you're using Fruity Loops Studio and are wondering how to use the pitch bend plug in, this video is where to look. You will get a full walkthrough of using the pitch bend features in FL Studio.
The right handed version of the Catherine wheel stitch creates a fabulous pattern of pinwheels and undulating borders, but be warned: the crochet pattern is for intermediate to advanced crocheters only.
To decorate a fire truck birthday cake, you will need the following: three chocolate cakes baked in loaf pans, Oreo-type sandwich cookies, candies, and brightly colored icing.
In this video, you'll learn how to make your very own bicycle wheel windmill. This completely recyclable creation which can easily be made from that old bike that's just been rusty away. Put it to good use and make this great eco-friendly windmill. Step by step you'll learn exactly what to do to make this windmill spin.
This video pottery-making tutorial shows how to throw a clay teapot off the hump on a pottery wheel. Watch, follow along, and learn how to quickly sculpt a simple teapot. Get some clay and make your own little ceramic teapot today.
Stephen Hawks, resident potter in Westville, Georgia demonstrates how to throw a churn on a foot-wheel in two joined pieces. This fully functional clay churn can be used to make butter. Learn how to throw clay onto a foot-wheel pottery wheel to shape a butter churn by watching this video ceramics tutorial.
Check air pressure in car’s tires
Watch this video tutorial from the Polish Guy to see how to clean and polish a headlight using Autosol Polish. In this polishing tip we clean a headlight from a Ford F150 using Autosol metal polish. The video includes polishing instructions for cleaning a car or truck headlight by hand as well as using a drill with a buffing wheel.
Those looking to begin making pottery, will benefit from the instruction provided by this video pottery tutorial. Center the clay, force the clay to mold to your hand rather than molding the clay, and start throwing pottery. Learn how to use a potter's wheel and begin working with ceramics by watching this instructional video.
Simon Leach shows us an easy way to center your clay on the wheel