Roadway Safety Search Results

How To: Change a flat tire on your automobile

Getting a flat tire is a pain, but if you can change it yourself, it can save you a whole lot of frustration. This video tutorial will show you exactly how to change your flat tire on your automobile, once you've pulled off the side of the road. You'll need to find the spare wheel and the tools required to replace the flat, which is usually stored in your car's trunk. The replacement tools include the jack and the lug wrench. Remember, when changing your flat tire on your vehicle, make sure y...

How To: Perform the chopping the wood trick on the longboard

Take a look at this instructional video and learn how to perform the long board trick chopping the wood. This trick is performed by jumping the heel side of the board with the front foot while kick the back foot out and then jumping back toe side. This is done while carving and you can set it up with combinations of other tricks such as walking the plank or the cross step. Be sure to wear safety gear when attempting this trick.

How To: Do the bunny hop trick on a bicycle

Check out this cycling video tutorial to see how to do the bunny hop trick on a bicycle. Your BMX instructor for the day goes through the very basic steps with demonstrations on the bike bunny hop, along with some out-takes at the end to ease the pain of falling on your ass.

How To: Spray paint graffiti

To spray paint graffiti, you will need the following: 2 cans of spray paint and a mask. You will need to have an idea of the design you want to paint, before you begin this project, because you will need to work quickly. Put on your safety/protective gear. Paint an outline of your design, first, with one can of spray paint. Then, you will want to strategically fill in the design. One can is primarily for filling it in and achieving light and shadow. Therefore, you will need a dark shade and a...

How To: Deep fry a turkey

In this tutorial, we learn how to deep fry a turkey. Make sure before you do this, you take all the safety precautions and have a fire extinguisher around you. Next, you will need a propane tank hooked up to a large pot that holds 40 quarts. Now you will need to dry your turkey off to avoid a fire with the oil when you place it inside. Next, place the turkey onto the deep frying hook and make sure it's thawed completely. Dunk your turkey into the oil very slowly, then cook it 3.5 minutes per ...

How To: Install an exhaust on a Ford F150

In this Autos, Motorcycles & Planes video tutorial you will learn how to install a Borla exhaust on a Ford F150. For this you will need a 15mm and a 10mm wrench, a 15mm deep socket, a 10mm standard socket, a ratchet, safety goggles and work gloves. First remove the spare tire and the heat shield. Using the 15mm wrench loosen the nut on the clamp on the muffler. Unbolt the hangers from the vehicle and remove the kit by turning it counterclockwise. Next put the new exhaust in place, take the sh...

How To: Wear a hijab in folded style

The way to wear hijab shown in this demonstration with a simple wrap around the head, securing the hijab with bobby pins at the back of the neck. The ends of the hijab are pulled forward to the chest. Then a thin scarf in a contrasting color can be wrapped around and tied at the nape of the neck as well. A portion of the hijab is pulled forward over it and pinned over the ear. Then one of the ends is pulled under the chin to the opposite ear and pinned to the head. The other end is wrapped ar...

How To: Remove RC Lexan paint from a model car

To remove the lexan paint, obtain a bottle of brake fluid. Make sure you read the Material Safety Data Sheet (MSDS) for its harmful effects, and put on a pair of gloves to avoid contact with the hands when applying the brake fluid. To remove a large area of paint, pour a little amount of brake fluid onto some paper towel, and rub the area in a circular motion until the lexan paint is completely dissolved and removed from the area. A Q-tip can also be used to remove smaller areas. Apply as muc...

How To: Diagnose five common sounds your car might make

Kim Parent from Drivers Side answers questions received about the diagnosis of sounds your car may make. 1. Squealing sound-Typically means brake pads need to be replaced. 2. Mechanical sound with steering wheel looseness-Probably means you have loose joints in the front of your car. Kim advises that this is a safety issue. 3. Mechanical knocking sound without steering wheel looseness-If you hear this sound when you're making turns this could mean you have a CV Joint that's worn out. Kim reco...

How To: Do Chris Jericho's CodeBreaker wrestling move

This video tells us the method to do the CodeBreaker move in wrestling. You may or may not run forward. You can jump using your right or left leg. Bring the knees below your opponent's collar bone and keep them close together. Wear knee pads for safety. Hold your opponent's head below the ear or above the ear. Keep your body tight and together during this move. As a defender, do not resist the opponent. Fall down with their weight. If you are taller, you should spread out your feet more than ...

How To: Fell and sned a tree

Woodland areas provide a personal forest where you can ramble about and relax. This video tutorial teaches you how to chop down a tree in your woodland area and what to do with trunk afterwards. First, you'll need to have the tools and proper safety equipment. Next, thin the trees to allow more light and encourage growth. Then use your chainsaw to cut a gap on the side of the tree that you want the trunk to fall. Finally, sned the tree by cutting off branches and reducing it to manageable 2 m...

How To: Use a saw for making jewelry

This video tutorial is about basic sawing techniques. Before practicing it you need to wear safety goggles for protecting your eyes. First of all, make a practice sheet. Draw three lines in a metal piece. One line is straight, one is curve and another is zigzag. Lubricate the saw blade and start sawing. Hold the saw straight and move forward. Blow the dusts away. For making curve don't move the saw, rotate the metal piece to cut it. Hold the metal piece tightly when you sawing it. Addie kid h...

How To: Install glue-down hardwood flooring with Lowe's

This Lowe's video shows you how add warmth and beauty to your home by installing hardwood floors step by step. First you must prepare the sub-floor. You will need engineered hardwood planks, transitions, and moldings. You will also need flooring adhesive, trowel, hardwood floor cleaner, circular saw and table saw, hammer, nylon tapping block, pry bar and pull bar, wood glue, pencil and tape measure, nails, knee pads, dust mask and safety glasses. You should read the instructions. It should ta...

How To: Make a DIY designed tank top

Watch this video to learn how to make a tank top or shirt with lace and a print. You need a template with the picture of your choice, some lace, some fabric glue and fabric pins or safety pins, and a flat board about the size of a meal tray. Slide the board into the shirt. Put the template on top of the lace, then pin it in place. Next cut out the lace along the lines of the template. Arrange the lace on top of the shirt in the desired shape and glue it in place. Wait 48 hours before washing....

How To: Change oil in a lawnmower with Lowe's

Lowe's home improvement expert, Mike Kraft provides a step-by-step method for changing the oil on a walk-behind lawn mower. From assembling the proper tools and supplies you will need to complete the task, through disconnecting the motor for safety, through the proper drainage technique and finally refilling the crank case this video gives complete instructions for any mower maintenance. Changing the oil on your mower will extend its life. Following the steps in this guide will provide you wi...

How To: Use a pressure washer on wood and other surfaces

The many uses of a pressure washer that can be fun and save time on the harder cleaning jobs around the house. Always use safety glasses when using power tools. The pressure washer easily attaches to a garden hose and multiplies the water pressure. It is good for removing dirt from wooden fences, sidewalks, decks and the side of your house. When you get used to the pressure washer and begin using its attachments, you will find more uses around the house and with your vehicles. It can be fun a...

How To: Make a diaper cake to bring to a baby shower

Here is an interesting idea for a baby shower: a diaper cake. Using various materials such as a tube, a glue gun, some safety pins, string, rubber bands, scissors, and 63 diapers, you are on your way to making this bizarre yet interesting cake. After rolling together each individual diaper, holding them together with rubber bands, you are on your way to making this cake. While this cake is not meant to be eaten, it is a very interesting centerpiece or gift for your next baby shower.

How To: Unstick rusted nuts and bolts

Never be frustrated by a rusted nut and bolt again with this foolproof removal method. Loosen as much rust as possible off the nut with a wire brush. Tap the sides of the nut with a hammer to help the rust separate and fall off. Apply heat to the side of the nut for about a minute. When the bolt is cool enough to touch, spray WD-40 on and around the nut and bolt. Tap the end of the bolt with a hammer to loosen the threads and allow the oil to penetrate. Wait another minute or so for the oil t...

How To: Make a custom map in Left 4 Dead

A map is a map is a map. Unless, of course, it's a map that you're using to navigate around Left 4 Dead. Having a customized map design lets you quickly find safety points, fellow players, and identify zombie locations so you don't, well, die.

How To: Use belays for rock climbing

Belays enable climbers to stop fellow climbers during a fall. Therefore, belays are an essential safety device in climbing. Learn how to use belays in this climbing video tutorial. Take action: use a high friction rope device, have a large carabineer, communicate with partner, and consult your local outdoor store. Josh, the instructor in this how-to video from Live Strong, is an avid climber that resides off the coast in central California. He has managed for a mountaineering sports company f...

How To: Roller skate

Roller skating is not hard to learn, but requires some knowledge and equipment. Learn how to roller skate in this video lesson. Take action: invest in proper safety equipment, concentrate on form: shoulders should be above ankles, walk on skates to begin, and lead with toes. Catherine Werst, a.k.a Stray Cat from Central Coast Roller Derby and the instructor in this how-to video from Live Strong, is the coach of Derby 101 and has been skating since she was eleven years old and competitive for ...

How To: Do neck exercises with barbells

Tone your neck muscles with this barbell workout. Learn exercises and stretches for your workout routine in this fitness video. Take action: use a partner or safety machine, place pad of barbell on head, flex neck to lift head straight up, keep lower back straight, and move slowly. Tom Clifford, hte instructor in this how-to video, has a degree in physical education, fitness and health from Eastern Michigan University, where he ran track and cross-country. Tom has worked as a personal trainer...