Runway Completely Ready Search Results

How To: Use the instrument landing system in Microsoft FSX

In this how-to video, you will learn how to use the instrument landing system in Microsoft Flight Simulator X. First, open the FSX map. Click on the airport and an ILS frequency will be displayed. Put the ILS frequency in your radio panel. Switch using the arrows and confirm by clicking on the buttons shown. With the displayed dial you are going to do the approach. The vertical bar indicates whether you are on a good glide or not. The horizontal bar indicates whether you are on the runway. Wh...

News: NASA's Curiosity Just Got Bricked! Working LEGO Mars Rover Ready for Exploration

Using a LEGO Mindstorms NXT kit, a pair of awesome engineers put together this fully functional replica of the Curiosity Mars rover. Not only is it built completely out of LEGOs, it's motorized, programmable, and ready to explore the far reaches of your living room. The rover was built for the Build the Future in Space event at NASA's Kennedy Space Center. Four of the six wheels are powered, allowing it to make 360 degree turns, and the arm and mast are both fully controllable. The entire con...

How To: Make mashed potatoes with Snoop Dogg & Martha Stewart

In this video, we learn how to make mashed potatoes with Snoop Dogg and Martha Stewart First, skin your potatoes until the skin is completely off of the potatoes. Then, cut your potatoes into chunks and place into a mixer with a stick of butter. Then, add in 8 oz of cream cheese to the mixture while keeping the mixer going. Add in 1/4 cup of milk and 1/4 c of cream along with salt to taste. Keep beating the mixture until they are really soft and creamy. These are great to serve during the hol...

How To: Use visual landing markers in Microsoft FSX

In this how-to video, you will learn how to use placemark visuals to make a perfect landing in Flight Simulator X. Along each runway, there are lights that range from red to yellow depending on your range. 2 reds and 2 yellows or 2 yellows and 2 reds mean that you are on the correct glide path. The lights will change according to your height while approaching the runway. Try and maintain the correct color code as you start to land. Keep on trying until you get it perfectly. Viewing this video...

How To: Install a pebble tile wall with Lowe's

In this video, we learn how to install a pebble tile wall with Lowe's. First, you will need to measure out your walls to figure out how much of the tile you need. Now, lay down a drop cloth on the floor so you don't get the floor messy. Next, turn the power off and remove the outlet cover and outlet from the wall. After this, wash the walls so they are clean, then apply your waterproof sealant from top to the bottom. Apply two full coats and make sure they dry completely before you move on. N...

How To: Tap a keg with various pumpers

In this tutorial, we learn how to tap a keg with various pumpers. There are around 5 different types of pumps you can use. Make sure your pump matches the keg that you have, to make your beer come out easiest. Also, make sure your keg is completely full when you purchase it, so the beer comes out easier. There are many different types of kegs, but no matter what type you have, place it inside of a large plastic bin with ice to keep the bottom as cold as possible. To use the pump, set it insid...

How To: Pantoast millet for breakfast

In this video,we learn how to make pan toasted millet. You will need 1 c water for 1/2 c millet. Grab a pot and turn it on high heat. Add your millet and keep stirring continuously so it doesn't burn. It will start to turn a golden brown color and you will smell a nutty flavor coming from them. After it is completely toasted, add in your water and stir the mixture until it boils. Add in cinnamon and any other flavors or items you prefer in the millet. Stir again and put the lid on, then turn ...

How To: Turn wood mount stamps to clear mount

In this how-to video, you will learn how to convert your wood mounted stamps to clear mounts. First, be careful and go slow if your stamps are already mounted on wood. You will need stamps and an EZ mount. Find a spot where the image fits and trim it around the stamp. Once this is done, remove everything from the rubber. Next, peel back the sticky side of the EZ mount piece that has been cut. Now, position the piece so that it is completely covered. Trim the excess EZ mount. Make sure you use...

How To: Ice cakes using a spatula

You can ice cakes using a spatula and put a “crumb coat” on the cake to seal in the crumbs prior to decorating. Start by putting a large dollop of icing on top of the cake, spreading it completely over the top with a spatula. Use enough icing that you don't pull the crumbs into the icing as you work.

How To: Do the Horse Stable glitch in FarmVille (03/09/10)

This is a recent glitch, similar to the chicken coop glitch, where you can make your horse stable completely ready. Just watch this brief video tip to see how to benefit from the Horse Stable glitch in FarmVille (03/09/10). It's a simple glitch in the game that allows you to use a horse that is unready to make a stable 100% ready and be able to collect from it. This is very helpful when you are trying to achieve the HorsePower ribbon on Farmville.

How To: Change and balance a car tire

In this tutorial we learn how to change and balance a car tire. First, take the tire and remove the air out of it from all the sides. After this, remove the tire from the wheel. You will need to use a pry bar to help you remove it from the tire completely. It will help out a lot if you have a machine that will do this for you. Then, apply grease around the wheel and put the new tire on. From here, inflate the new tire while on the wheel and it will be ready to install on your vehicle.

How To: Make strawberry lemonade Jell-O shots

In this tutorial, we learn how to make strawberry lemonade Jell-O shots. First, you will need to take a couple cups of boiling hot water, then mix it with a large packet of strawberry lemonade Jell-O. Mix this together until all of the powder is completely dissolved. After this, pour 1.5 c of citrus vodka (cold) into the bowl of Jell-O. Then, take a fresh lemon and squeeze the juice of it into the bowl, making sure to remove any seeds. Mix up the rest of the mixture after this, then pour into...

How To: Make deadly homemade bolts

In this Hobbies & Toys video tutorial you are going to learn how to make deadly homemade bolts. Take a pencil and remove the ferrule from the end of the pencil. Make sure to pull it off completely so that you expose the flat end. Then take three pieces of electrical tape and tape them on the pencil and on to each other so that they form three wings. Now take a tack pin and with the help of nose pliers and pliers break off the rear end. Apply some hot glue to the ferrule end of the pencil and ...

How To: Create a striped cane in 5 minutes

Fimo expert Corinne Bradd and Emma Ward with The Crafts Channel and magazine Craft Beautiful demonstrate how to create a striped cane in 5 minutes. To create the stripes, cut out rectangles of black and white clay and stack them in alternating colors. Then, roll out a cane in a nice, bright color so that it matches the length of the stacked clay rectangle. Then, cut the rectangle into slices. Then, press the rectangle stripes onto the bright cane so that it completely wraps the cane. Squeeze ...

How To: Make an Alice Cullen crest necklace

In this video, Alice demonstrates how to make a crest necklace using simple things. For making this necklace she collects some materials such as oblong shaped rock or polymer clay, some paints, a computer print of a cullen crest and so on. She uses the ordinary black paint to paint the rock completely. Next, she collect a computer print of a layout for the culler crest and carefully cutout the shape and using craft glue she stick it on the painted rock to see it fit. she takes some white pain...

How To: Juggle 3 clubs at once for beginners

The creative minds at Soulstyle show you how to juggle three clubs at once with some excellent tips to help get you started. Start by tossing one club in the air and catching it in the correct spot before you more forward into juggling. Once you've got that down pat, toss two clubs back and forth, in the shape of an "X" until you are completely comfortable with that. Keep your eyes focused on the highest point of the "X" and avoid the temptation to watch your hands. When you've mastered two, ...

How To: Walk like a model on the runway

This video shows you how to walk like a model on the runway. There are three important tips to bear in mind if you want to look fabulous when you are coming down the catwalk. The first one is to have great body posture. The second tip is to maintain good eye contact. You have to make sure that you keep your head straight and look straight. Most important of all you must have your own sensibility of walking creativity. This is demonstrated with a walk up and down a corridor, showing how all th...

How To: Clean off ceramic pots before firing them

In this video, we learn how to clean off ceramic pots before firing them. First, take a knife to clean off any bits that need to be removed to make the pots completely smooth. After this, dip the top of the pot into glaze and let it dry on a flat surface. For the base, hold with your two fingers on the inside, then dip in the glaze and let dry. Once these are dry, take a knife and scrape the edges where excess glaze may be at. Then, scrape all around the edges and clean the back of the side w...

How To: Remove popcorn and respray knockdown texture

In this Home & Garden video tutorial you will learn how to remove popcorn and re-spray knockdown texture. First of all you will need to cover the floor and any hangings from the ceiling like chandeliers with plastic covering. Then you need to scrape off the areas on the ceiling and the walls and remove the popcorn completely. After it is fully removed, paint with spray paint. You will need to paint the whole room as the shade of the new paint will not match with that of the old paint. After t...

How To: Make jelly or jam from fruit

To make this jelly you will need a food puree-r. Start with a large bowl of blueberries. Take a small amount of the blueberries and put them into a separate bowl and mash them up. You don't want to puree all the blueberries. Dump the rest of the blueberries into the puree and start pureeing them into the bowl with the smashed blueberries in it. Turn the handle a few turns and then add the grapes into the puree-r with the blueberries. Puree the rest of the of the grapes and blueberries until t...