Runway Completely Ready Search Results

How To: Turn on rollerblades

In this how-to video, you will learn how to turn while riding on rollerblades. Start out by going into the ready position with forward momentum. Look into the direction you are going to turn. Keep your body over your skates. Push on the opposite leg of the direction you want to go. This will allow your outside leg to swing around. There is another turn you can try out that is faster but much more unstable. As you are moving, slowly move one skate forward and the other backwards. Pretend you a...

How To: Make your own greeting card

This video demonstrates how to make your own Greeting Cards at home. You will need the following: water color paint in bottles with sponge tip applicators and spray, ruler, adhesive, solid color paper stocks, patterned paper, a rubber stamp, stamp cleaning products, a bone folder, and a trimmer.

How To: Build a light table for silkscreening and photography

Josh Copp and Madeline Donahue show us how to build a light table from pine wood and plywood utilizing two fluorescent light fixtures as the light source inside the box. The frame of the box is fashioned out of two 1X8 planks cut into four pieces so that two sides are 30 inches and two sides are 22 3/8 inches. The base of the box is made of plywood or OSB and is 30X22 3/8. Once the pieces are cut and assembled using a pocket hole jig and wood screws, the inside of the box is painted with whit...

How To: Do backpack pushups

Pushups are a great workout. But if you think you're ready to take it to the next level, you should consider incorporating backback pushups into your workout. The added weight will give your muscles added strength and give an exciting new take on a simple exercise.

How To: Use barn door lighting in your studio

Ben for Mechanical Mashup demonstrates how to build a barn door halogen light system for a studio and how to establish right triangles and parallel lined without a square. It is quiet expensive to buy a barn doors according Ben, so it could be built by us. These barn doors can be adjusted anyway we want to. So the barn doors are to be fixed to a halogen light. First thing done is to unscrew the frame of the halogen light. The glass is removed by just bending the frame. Next thing to do is to ...

How To: Perform the cut and restored string trick

1. This video describes how to perform the cut and restored string trick. For performing this you need One "Scissor", "about 4 inch length of string", "one Straw" which you can get any restaurant or juice shop and "one X-acto Knife". Now actually prepare the straw, and the secret is in the straw in this case.

How To: Make pita hummus pockets

If you are looking for a healthy and flavor packed meal to change up a boring lunch routine then your in luck. This video will show you how to make a pita hummus pocket. You can make your hummus from scratch.

How To: Design a Grecian urn with pink roses & other flowers

He says that he is soling to make some foliage, flowers and leaves draping out of the vase so that it gives you a feeling that you are in Greece when seen from the balconies of houses in the hillside or something. He first puts some lemon leaves to cover sides of the vase making them drape out, them he puts some comatose leaves on the sides along with the lemon leaves and asks you to make them hang outside from the sides of the vase so that it gives a real delicate look. He says that all thes...

How To: Make raw "fried" mushrooms

Karen Knowler demonstrates how to make a quick and easy recipe called Fried Mushrooms in this video. This dish can be eaten as it is or topped with your salads. She takes in a generous quantity of mushrooms and slices them (obviously after they are washed!). Then olive oil is drizzled over the mushrooms and they are mixed well. Next, the juice of a whole fresh lemon is poured over the mushrooms with olive oil, to give an added taste. Next, she crushes two whole garlic pods and adds them in. T...

How to Use Photoshop for video: pan & scan image preparation

In this Adobe Photoshop tutorial the instructor shows how to prepare pan and scan images. To prepare an image by panning and scanning is quite different than preparing an image normally for using in your video. These images should be extra sized as you would perform special effects on the image in your video. This is also called as "Ken Burns" effect. Now go to the file, new menu and select the video format that you want to use according to your requirement. Enable the correct pixel aspect ra...

How To: Make mincemeat croissants

This video illustrates to Make Mincemeat Croissants. The ready made croissants are sold in the super markets. Buy one and remove the wrapper around the croissants. Unroll the croissant and cut the pastry into triangles. Pizza wheel can work better than a knife. Cut lengthways to make smaller triangles, spoon some readymade mincemeat onto the pastry. Carefully roll the pastry up from the wide end, rest them on a baking sheet lined with the baking parchment. Try mixing in 1 or 2 tablespoons of ...

How To: Make Filipino-style orange chicken

In this video, from panlasangpinoy we learn how to make a Filipino style orange chicken. First the ingredients are shown as: boneless chicken breast, brown sugar, soy sauce, garlic, corn starch, green onion, vinegar, flour, egg, salt, orange juice, and ground black pepper. In a container, he adds the flour, salt, black pepper. Cover the container and shake it up. Open it back up, dip chicken to egg and put chicken in container. Close the container and shake it up again. Next it's time to deep...

How To: Make spinach and feta pie

This video demonstrates a good recipe for food lovers. It shows how to make Spinach and Feta Pie. For this the spinach is first cooked by placing on a strain. The strain is further placed on a bowl of water with some butter in it. The bowl is put on medium heat and the strainer is put on bowl so that the spinach gets cooked with the heat. The cooked spinach is then squeezed and dried. Then it is chopped. In a pan some bacon sticks have to be fried slightly and then feta has to be added. Furth...

How To: Make a strawberry martini

This recipe will make a deliciously rich strawberry martini. The three main ingredients are Vodka (the video used Gray Goose Vodka), Chambord, sugar syrup and fresh strawberries, diced. Use a cocktail shaker but don't start out with ice. You will understand why shortly. First into shaker, pour two ounces of vodka, half an ounce of Chambord, a little bit of sugar syrup according to your tastes (the more the sweeter). Drop in a small handful of the diced strawberries. Using a muddler or other b...

How To: Install a wall niche

A wall niche is a great way to add a nice decorative look to a wall. The niche is made of lightweight polyurethane. To install the niche choose the location on the wall where you want to put the niche. Put the niche up to the wall and draw an outline around it. Before you start cutting the wall cut a hole in the wall, use a compact mirror and a flashlight to look up in the wall and be sure that there are no wires or pipes where you are cutting the hole for the niche. After checking to be sure...

How To: Make a toasted marshmallow cake frosting from scratch

To make a toasted marshmallow cake frosting follow the below instructions. Before start preparing get ready with the following ingredients such as: 1 devil's food cake mix, and ingredients to prepare cake, 12 large marshmallows, 1/2 cup chopped walnuts, 1/2 cup firmly-packed light brown sugar. The preparation steps for this delicious toasted marshmallow cake frosting is very easy. First, preheat oven to 350 degrees Fahrenheit and grease a 9 x 13 baking dish. Then Prepare the cake mix accordin...

How to Make Indian food: Basmati rice in 5 minutes

Sheba shows us how to cook Basmati rice in just 5 minutes in a very easy and in a simple way. Firstly a pressure cooker is taken and add 2 tablespoons of olive oil(whichever is applicable) and turn on the heat. Then add a pinch of cumin seeds and wait for the oil to eat up which will take a couple of minutes and then add the 1 1/2 cup of basmati rice which was soaked in water for about an hour. And then add 2 cups of water which is sufficient for 1 1/2 cup of rice or you can measure it using ...

How To: Shoot zoo or wild life photography

NikonDifferent of Nikon shows you how to shoot zoo/ wild life photography (particularly with a Nikon d40 as an example with a zoom lens with Vibration Reduction), given the fact that animal enclosures are usually set up to give the animals space. You'll want to limit your visit to two or three types of animals (good photographs require time or patience). Animals playing/ fighting make good pictures, but you need to set a fast shutter speed (if you have low light, crank up your ISO). Try to an...

How To: Use a tumbler to polish metal

Magazine associate editor, Jill Erickson, demonstrates how to use a rotary tumbler with stainless steel shot to both polish and harden metal. Jill explains the benefit of stainless steel shot, which is resistant to rusting unlike standard steel. Using shot of various shapes and sizes will make polishing in crevices more effective, providing a more even shine. The process: Add enough shot to cover the bottom of the tumbler, then add a small amount of water. Just enough to cover the shot will d...

How To: Make a New York sushi roll

This video explains how to make a New York roll. First of all spread rice onto the half sheet of nori and spread the toasted sesame seeds. Then add nigir slices of salmon belly, two pieces of Yellow Thailand, two pieces of seared sesame tuna. Then use a frying pan with oil to sear all four sides and then add sesame seeds on each side. Roll it up and tap each ends after that apply a thick layer of tempura flakes on the top of the roll and then roll the roll with a plastic wrap over it. To mold...

How To: Make Filipino pandesal bread

Take bread flour add little sugar salt and baking powder to it. In another bowl take fresh milk add yeast and sugar mix it thoroughly and leave it aside for 10-15 minutes. Mix the dough. to this add egg, melted butter and cooking oil to it and leave it for 10 minutes. To this add the mixture of yeast and milk which was already prepared. Knead the mixture well and by covering the bowl with a cloth leave it aside for an hour. Now on a flat surface put some dry flour and knead it properly. Now m...

How To: Make a spider sushi roll

This video explains how to make a spider roll. First, spread the rice for the spider roll. Make sure that the top and bottom edges have a thickness of 1/8 inches without rice, so that it won't squash it out when rolling. Then add some toasted sesame seeds. Place the rice patty vertical, with top edges empty, and place the deep fried soft shell crab into it. The claws and legs should be outside of it. Put some crab sticks, avocado and some cucumbers onto it and roll with leaf lettuce so that i...

How To: Slide an object from left to right in Flash

This video is about sliding an object from left to right in Flash. We will be creating a simple, core animation in Flash. First, let's import an image to our scene. Place it here. Now, let's convert our image into a movie clip. Change the frames per second value. Now, go to the frame and enter the key frame. Bring the image here. Let's rotate our image a little bit using the free transform tool. That will give more dynamic animation. Go to frame 30 and hit F6. Now, we need to add motion. Chan...

How to Walkthrough Darksiders: The Destroyer - Fight Abaddon

Are you ready for the last boss fight in the Xbox 360 game Darksiders? Once you fight Abaddon in the Destroyer, you win, unless you lose. You'll now have to face Abaddon in his "normal" form. He is a powerful swordsman so you'll want to take the defensive route as he can block most of your basic attacks. Instead of attacking him, be patient and stand near him. You'll need to perform a Block Counter but simple tapping the Dash button (without hitting the directional stick) the moment before Ab...

How To: MAke Pakistani shaljam or turnip gosht

This video explains the method of preparing the Pakistani shaljam or another name called turnip gosht. The main ingredients of this item are 3 or 4 turnip, 500grams of mutton, one medium size of tomato chopped and one onion chopped, ginger garlic paste, one spoon of sugar to add at the end, take a spoon of tamarind powder, garam masala, chilly and coriander powder and some oil and salt. Take some era also take a pot boil it and pour some oil onto it. Put the era and garam masala powder onto i...

How To: Prepare stuffed mushrooms

The video shows us how to prepare stuffed mushrooms and for this you need to gather all the required items like spinach, mushrooms, some goat cheese, some parmesan cheese, onion, garlic, lemon juice, butter and fresh bread grams from fresh bread along with some pepper, salt and dry tine. Firstly using a spoon, remove the stem out of the mushroom and chop them and then stuff it up. And then take the mushrooms in a tray and pour the lemon juice over them and mix it up. And then in a pan add som...

How To: Make raw marinated vegetables

The Raw Food Coach, Karen Knowler, shows us a very simple marinated vegetables recipe that makes a good alternative to salads or steamed vegetables. The raw vegetables used for this recipe are leeks, broccoli, zucchini (also known as courgette), and tomatoes. Suggestions for substitute vegetables, such as bell peppers and cauliflower, are also given. First we're shown us how to properly chop these vegetables and mix them together in a way that is pleasing to all the senses, including the eyes...

How To: Install under cabinet fluorescent lighting

It can be very difficult to see underneath wall cabinets. The cabinets and your body can cause a lot of shadows and make it very hard to see. Getting light under the cabinets is very easy. The answer is to install thin profile fluorescent lights that are made to go under the cabinets. Remove the diffuser and bulb from the lamp and you will expose the screw holes. Put the lamp up under the cabinet in the location that you want them to hang. You want to install them as far forward as possible. ...