Safe Wondering Search Results

How To: Implode a soda can with heat

Check out this science experiment video to see how to implode a soda can with heat. That's right, implosion. Take an empty aluminum soda pop can and put a spoon of water into it. Heat it over the stovetop for about thirty seconds, then invert the can and dip it into a bowl of water. This is as simple as science gets, and easy to do, just be safe around the stove flame and don't burn yourself.

How To: Start and stop on a bicycle

This how-to video offers some steps for coming to a safe stop and a quick start on a bicycle. Coming into the stop, lift the foot off the bike pedal early so you have a chance to get the foot on the ground before stopping. Use the brakes while in the stop position. Reset the pedal to the midway position while fully stopped. Keep the head up to get ready for take off, and try to get momentum going before getting the other foot back in. Watch this video cycling tutorial and learn how to start a...

How To: Do step aerobics

Step aerobics are performed for cardio fitness and weight loss using an elevated platform. Classes are offered for all skill levels. Learn how to do step aerobics in this exercise tutorial. When doing step aerobics you should get an aerobic stepper, use entire foot to step up & down, keep an eye on the step, tap it out to rest and be safe. With this how to video you can do step aerobics for a more effective workout.

How To: Learn a few motorcycle safety tips

Check out this informational safety video that provides a few motorcycle safety tips. This video was created to encourage safe motorcycle riding. Warning! This video contains SERIOUS motorcycle crash videos! Here are a few safety tips to keep motorcyclists safer. The contents of this video are paraphrased & condensed from a motorcycle magazine article. Avoid severe injury and death by learning a few basic motorcycle safety precautions.

How To: Do the headstand yoga pose

Sirsasana, or headstand, looks quite difficult, but is actually very simple to learn. In most yoga traditions, however, headstand is practiced near the end of a sequence. With this in mind, headstand is probably not a good idea until you are warm and loose from yoga or another form of exercise. This how to video gives you step by step instructions for the headstand yoga pose. Do not use the wall. It's easier, but it's not safe. When you're ready, you'll feel it and you can move safely that wa...

How To: Learn some basic tips and tricks on lock picking

Check out this instructional con video that offers some basic tips and tricks on lock picking. This tutorial covers the various types of locks and the different tools that you can use. Learn how to organize your keys to avoid losing them. Put them in a safe place! This video also talks about door locks. Learn the basics about lock picking with this tutorial video.

How To: Do the backbend yoga pose

Backbends shouldn't really be called "backbends", but instead "full body bends" because they involved so much more than just your back. All on its own, your spine has a pretty impressive range of motion, but in order to do a deep backbend, all the muscles and connective tissues that support your spine need to be long and limber. Everyone I know who has an impressive backbend swears by the reclining hero or supta vajrasana posture. Be safe, but if possible, hold this one for a long time.

How To: Tie hammock hanging knots

The knots demonstrated in this how-to video are a good way to hang a hammock, because it makes it so easy to adjust your hanging height. The whipping knot around the tree will not slip if tied correctly. Make sure to tie the second half hitch or the knot may slip and come loose. As with all knots, use your own discretion and be safe. Watch this video survival training tutorial and learn how to tie some sturdy knots useful for hammock-hanging.

How To: Weld figurines

Watch this instructional metalsmithing video to weld a set of figurines out of sheet metal, nails, and a coat hanger. Oxy-acetylene welding is the only gas flame type of welding that is hot enough to melt all commercial metals. Use 22 gauge sheet metal to make clean and safe metalwork. Use a plasma cutter to quickly cut out the basic pieces. You can also use a blacksmithing hammer to bend the metal into unique props fpr your metal figurines.

How To: Fix the lead on a Dyson vacuum cleaner

Check out this home repair tutorial video that demonstrates how to repair a lead on a Dyson vacuum cleaner. After a long period of time, the lead will get metal fatigue within it and the machine will work intermittently. Follow the step by step instructions in this domestic appliance repair video to properly troubleshoot the Dyson vacuum's switch unit. Please note that all work should be performed by a qualified person. Make sure to take the necessary precautions to ensure a safe repair of yo...

How To: Make cheap prop eyeballs for Halloween

Super cheap eyeballs without breaking the bank! While grapes are the safe standard to spook out trick or treaters, they don't look very realistic. For this project, you will need clear spray paint, white spray paint, black spray paint, blue acrylic paint, black acrylic paint, red acrylic paint, coat hanger or wire, tweezers, an artist's brush, a foam ear plug, a rag, sanding block or sanding paper, and bouncy balls. Watch this video prop-making tutorial and learn how to make cheap prop eyebal...

How To: Fold down the windshield of a Jeep Wrangler JK

This is a step-by-step video tutorial on how to fold the windshield of a Jeep Wrangler JK. You will notice there are three tools needed; a Phillips head screwdriver, a 13mm deep well socket w/ ratchet and extender, and a t40 torx. First you should remove the plastic covers on the A-pillars of the Jeeps windshield. Make sure you put all bolts back into the holes they came out of for safe storage. That will also keep dirt out of the threads as you drive your vehicle with the windshield down. Ma...

How To: Measure electrical resistance with a multimeter

This is a guided hands-on laboratory activity to help a student understand the proper and safe use of a multimeter to measure electrical resistance. These two video guides the student through the proper techniques for measuring resistance with a multimeter, but you'll need some assorted resistors, a rectifying diode, a photo cell, an electronic labs kit, and some other stuff.

How To: Power off stall and recover a small plane

In this AeroCast episode, Anthony Bottini discusses the Power Off Stall maneuver as performed in the Piper Warrior (PA-28-161), referencing the procedures and standards outlined in the UND Aerospace Warrior Standardization Manual. All performance tolerances are based on the performance standards set forth by the FAA Private Pilot Practical Test Standards. Power Off Stall practice is vital in increasing a pilot’s proficiency in regards to stall recognition and stall recovery techniques during ...

How To: Build the ultimate straw rocket

A very easy to make rocket made from a drinking straw, and launched using air pressure. Almost everyone will be able to make this, it does not require any hard-to-find items, but also can it be made in very little time. Therefore the rockets themselves will be very easy to mass produce. They will fly HIGH up in the air, and then land on the ground, completely safe! Use this doc for reference.

How To: Take Back the Internet with This Custom DNS & VPN Bundle

In the early days of the internet, if something was there and not password protected, you could see it. In the process of becoming the indispensable work and entertainment resource that it is, the internet also grew the same borders that countries have while also getting less safe for the people using it. If you want to watch something, you have to hope it was available in your country. If you want to keep your information safe, you have to take some extra steps to make sure that happens. The...

How To: Creating Unique and Safe Passwords, Part 1 Using Wordlists

Greetings fellow hackers. This tutorial is about creating "safe" passwords. This is different from strong passwords. Safe passwords is just creating a password that is not used by someone else or colleague, my definition. But how do you prevent something like this from happening? Of course you won't ask your friend if s|he is using the password you are about to create. Before I show you some of my tele-psychic powers like Professor Xavier, you might want to read this for advice on creating "s...

How To: This DIY Concrete Cheeseboard Will Make You Hungry

Concrete decor has been popular as of late, and the newest trend is dinnerware. At the London Design Festival last week, designer Vidó Nóri debuted a gorgeous new collection of geometric serving trays and bowls. There's no arguing that they look incredible, but this particular set will run you $20-80 per piece, which adds up quite a bit. If you don't want to spend that much cash, it's really simple to make your own elegant-looking concrete cheeseboard. Rebecca on A Daily Something made this b...

How To: Fake Your Ios Version.

If you are like me and you have a old iPhone and you don't want to buy a new one, you can fake your ios version by fallowing this tutorial. Just to be safe i am not responsible for what you do with this or if you mess up and wreck your phone. Plus ios and iPhone all belong to their rightful owners.

How To: Get to Azuremyst as a Horde player in WoW Cataclysm

If you play Horde in Wow Cataclysm (and who doesn't?) you may be wondering how to get to Azuremyst now that the boat that used to go there is gone. Well, this video is here to help and will explain each way to do it, including Shaman magic, waterwalking potions, flying mounts, and finally taking a boat from Stormwind if you can handle the Level 85 characters that faceroll you there.

How To: Make pneumatic dust system for blood and dust hits in film

Have you ever wondered how all of the blood and dust that flies from wounds and bullet holes in Hollywood films gets shot through the air so convincingly? The answer is a pneumatic dust system. This video will show you how to make one yourself for almost no money, allowing you to achieve all sorts of cool special effects without any expensive digital technology.