Want to make parchment cones for cake decoration? The secrets of making parchment cones for cake decoration are given in simple steps. First cut a parchment paper into an isosceles triangle of any size you wish. Now roll one corner inwards to the bottom end, curl it under and hold it. Now roll the other end over it and curl it under to form a cone, all the three tips should meet. Now fold the end with a sharp point inside the cone twice to secure it. If you are going to use it as decorating t...
Rice, 1 bag of seaweed, 2 eggs, 1 carrot, 1 cucumber, 1 yellow radish, beef, cooking oil, sesame oil, sesame, salt, bamboo roller, vinegar.
Joann from Paper Crafting shares her tips in this video for filing and saving her scrap paper and card stock. She has created a new system where she uses "paper protectors". They must be clear and they should be intended to use more than one piece of paper. She then puts the scraps coordinated by color and paper type in the clear plastic protectors in a basket so they are always handy.
On this episode of Scientific Tuesdays, Dylan shows you how to create a non-Newtonian fluid using corn starch and a little water. A non-Newtonian fluid is any fluid that does not follow the laws of physics.
To solder copper pipes, start by using a sharp blade and scrape the end of the pipe you are going to solder. This will get all the burrs off of the pipe. Next, take some steel wool and clean the pipe so that it is nice and clean and shiny. The next step is to apply some flux. Use a rag to apply the flux to the end of the pipe. You want to make sure that the flux goes all the way around the pipe. After putting flux on the two pieces of pipe, put them together using the fitting. Take the blowto...
Looking to create that cartoon-like plastic look of Barbie Teresa? In this two-part makeup tutorial, learn how to get that eye popping look with a little help from a makeup expert. In part one, eye application is shown, and in part two, eyes & lips are applied.
Mark Donovan of Home Addition Plus goes over the key features and benefits of the Rockwell reciprocating saw with active vibration canceling technology. A reciprocating saw is a type of saw in which the cutting action is achieved with a push and pull reciprocating motion on the blade. A positive feature of the Rockwell is that there are no tools needed to replace the blade and it acts great with all materials including wood, metal, plastic, and/or aluminum.
If you want to rappel down walls like a Navy SEAL, the Swiss seat knot is an essential skill to learn. With it, you can quickly create a modified rappelling harness. The guys at ITS Tactical have got you covered in this video showing how to tie a Swiss seat knot.
The CD bubble trick. So simple, fun, and clever. Learn how to blow a bubble from a blank cd.
Step by step guide to repairing circuit boards Yes, I know, my hands are shaky.
Nothing beats a Champagne tower for old-world elegance—so long as you construct it so it doesn’t fall down! Watch this video to learn how to build your own champagne tower. You will need:
If soap is so good for you, why does it leave behind that icky, gooey scum? Get rid of the gunk! Learn how to remove soap scum from your shower or bathtub.
A Box kite is a fun project that looks like it could never fly but it flies real easy. It's easy to make too. You will need dowels, straws, string, masking tape, scissors, and some newspaper or plastic. Watch this video tutorial and learn how to make a box-shaped kite.
Ever worked on a painting project and had the paint spill everywhere? This quick and easy pot made from a plastic soda bottle and tape will not spill, even when it tips over. Learn how to make this pot that does not spill(for paint, glue, machine oil, etc.) by watching this video tutorial.
This tutorial video will help you learn how to make an adorable card that will get lots of oooo's and aaaah's. This cute card will surely impress all your friends, an you'll have a bunch of fun making it.
Have you ever wanted to use a Tesla coil to draw a fixed arc on a two liter plastic soda bottle? Who hasn't? Well, see how to do it, right here!
Here's a cheap and easy way to make 3D plastic forms like Stormtrooper costumes and tons of other things. Make Magazine shows you how in this video.
Make the magic remover cloth shown in this how-to video which will remove all the scratches on your favorite CDs, your LCD display or just remove some scratches on plastic. You'll need egg whites of and a microfiber cloth. Don't throw away anymore CDs, DVDs, or lose important files. The trick in this video tutorial will rescue scratched CDs so you can still keep using them.
This video demonstrates how to make a hollow sculpture of just about anything you want using only plastic wrap and tape.
Using only a plastic bottle, a lighter, a string, and the step-by-step instructions in this how-to video learn how to turn any water into safe, potable drinking water. This is a vital skill for camping, hiking, and even emergency situations when there's something wrong with your running water at home. Check out this video survival training tutorial and learn how to purify water.
In June 2010, Maytag recalled over 1.7 million dishwashers due to fire hazard. In this video, learn exactly where to look for the tell-tale markings of a faulty appliance. Watch the video and then look for the items below on your own washer:
This video explains how to make an inexpensive compost roller. The video begins with a composed pile shown covered with a tarp to keep rain away from. The materials needed for this project consists of 3" barrel nuts(2), 3" hinges(3) and machine screws(3pk) from a local Wall-Mart. The tools needed for this project consist of an electric drill with drill bit, screw driver, wrench, jig saw or key saw and a heavy duty utility knife. The compost roller made was just a simple plastic drum with a hi...
This video provides a handy tutorial on how to make your riding mower stand up to the harsh effects of winter.
ThreadBanger demonstrates how to make recycled bleached skinny jeans. First, put on the jeans and if they are too big, pinch them at the back and mark them with tailor's chalk. Fold under the jeans at the bottom and mark the desired length with the chalk. Open up the seam of both pant legs with a seam ripper. Seam rip the back part of the jeans and the top band. Cut along the chalked lines. Redraw the seam and pin the pants. Sew along the chalk lines. Use pinking shears to cut away the excess...
To install a hard drive in a 13" (13 inch) Macbook Pro laptop computer released in 2009 you will make sure to first transfer all data off the drive then discharge any static electricity from your hands making sure your are in a static free work environment. Next you will remove the old hard drive, to do this flip over the laptop and remove the 10 screws around the edge of the device with a #00 Phillips screwdriver starting with the three longer screws on the top right. Next, lift off the bott...
In this how-to video, you will learn how to install a hard drive into a 17" Macbook Pro. Make sure you use the proper anti-static precautions before going on with this procedure. You will need a pry tool, a Phillips screwdriver, and a T6 screwdriver. Make sure you transfer your old data into the new drive before installing. Shut down the computer and flip the laptop over. Unscrew the ten screws around the bottom. Now, remove the cover. You will see the hard drive at the lower right. Loosen th...
Benson Trenh and Mark Norris show viewers how to build a bottle rocket using common household items. To build this creation you will need tape, a hole puncher, scissors and string. Also use a black plastic bag, or any color, for the parachute! Cut the black plastic bag into a square, any size you would like! Next, take the square and punch a hole at each edge of the square and string the string through the hole tying a knot. You should now have the parachute! For the body of the rocket, get a...
Watch this video to learn how to make no-knead bread. In a large mixing bowl, dissolve yeast into water. Stir in flour and salt (dough will be sticky). Cover with plastic wrap and let sit in warm place for a minimum of 8 hours at room temperature (approximately 70 degrees). Ten to twelve hours may be necessary, so letting it sit over night is a good idea, provided there aren't any dogs that will jump on the counter! The dough will be ready when the surface is covered with bubbles. Lightly flo...
Kipkay's ingenuity is enough to amaze us all, especially all of you indie filmmakers. These five tips for aspiring filmmakers will help you keep your sanity and avoid frustrating times. Have you ever got stuck in the rain while shooting? Have your recorder tapes ever gotten disorganized? Is your camera's display getting scratched up more than you want? Kipkay answers all of these questions with his five ingenious video tips.
In this episode, see how to decorate a small balcony to add livable square footage to your apartment by installing a reed fence, and making a bench out of a few plastic storage containers and plywood. There’s even room to include a balcony garden with a raised planter. These balcony decorating ideas can also be used for small patios and decks and will inspire you to create your very own outdoor oasis.
There are plenty of ways to make a camera mount for your car, but what if you don't have a car? If you use a bicycle or motorcycle to get around, you can still take smooth videos with this awesome DIY mount for your iPhone (or any other smartphone) by antoinebugleboy.
The fridge is one of the most excruciating things to clean, so it makes the perfect target on April Fool's Day. For this prank, just fill up a water balloon with whatever you want, lay it softly in one of the shelves on the door, and close the door with the untied end of the balloon stretched out so that the door will close and seal it. When your victim opens the fridge, it'll explode all over them. Simple and effective. Watch to see exactly how it works.
April Fools is the one day of year you can go wild with pranks and practical jokes. It's never too early to learn a new prank, and this one is particularly fun. All you need is a paper cup, some plastic wrap, and an exacto knife.
Fruit flies suck, but the fruit fly traps you can get from a hardware store can sometimes be environmentally damaging. Here is how you can make a safe fruit fly trap out of a votive glass, plastic wrap and apple cider vinegar.
Winter hair is usually lackluster and dry. Most of the time, we're just hoping that it doesn't resemble a thing of tumbleweed.
Remember when you were a wee little kid and you used to spend entire afternoons staging epic wars between your T-Rex action figure and the rest of the dinosaur kingdom, making them go "Rawr!" at every lash?
If you prefer plastic Christmas greenery over real, we totally understand. While PVC isn't exactly renewable, it is eco-friendly in the sense that you don't need to unnecessarily chop down young evergreen trees and sprigs each year, only to throw them away after a week of use.
Remember how when you were a kid you used to make bedsheet tents and act out Godzilla scenes with your toys, pretending to put on a movie? You can totally do that for a living - though, admittedly, you're going to have to step up your puppets a notch.
You can take a carton of plain glass (or plastic) Christmas ornaments and then add your own personal touch as a gift or holiday decoration. Fill the large globes with things like garlands or tinsel, and or add paint and glitter to others.
If you've ever embarked on a room makeover mission all by your onesie (or with a nice buddy), then you know that when it comes to repainting a room, you generally have a lot of paint left over in your roller that you don't know what to do with.