Sell Off Search Results

How To: Use pitch tinder

John Campbell shows us how to use pitch wood to create a fire. This is a good method to use when you have dead pine trees available. Pitch wood can be found in the first three to six inches of a branch of the dead pine tree. This area is covered with pine resin. You want to pick a branch on the dead tree, then cut this branch off from the main trunk. The area closest to the trunk should be soaked with the resin. Next, split the branch in half. Using one half, scrape off a bit of the tinder us...

How To: Create a raffia angel christmas ornament

This learning how to make a raffia angel. Once completed they can be used for gifts or a decoration on a Christmas tree. Supplies needed are: pipe cleaner, glue sticks/glue gun, scissors, wire cutters, pliers and embellishments. Wrap raffia around twice. Tie off, and leave some string to hang the angel. Cut a small part of the bottom until the ends are even. Gather a few strands on either side and braid them to make the arms. Tie these off with a piece of raffia. Put a dot of hot glue in the ...

How To: Make boba style drinks

In this video Lolicup Inc. show us how to make Boba. The ingredients include : 10 Cups of water, half cup of honey, half cup of dark brown sugar and 2 cups of Boba. Utensils required are a drainer, a large pot, a bowl for the sugar water and a timer, which is very important. The listed ingredients will be able to serve 10 people. Boba has a variety of names such as Tapioca Balls, Black Pearls and many others. The first step is to add the water to the pot and wait until it boils. The second st...

How To: Sharpen a knife on a Triple Oil Stone

sumaps2 describes how to sharpen a knife using a triple oil stone. The stone itself consists of three stones: a coarse stone, a medium coarse stone, and a fine stone. First, you must place the stone in a reservoir which has been filled with oil. In this example, transmission fluid is used because of its ability to keep metal from binding to the stone. However, you must be extra careful in washing the knives afterwards. All your knives can be sharpened with the triple oil stone, from your pari...

How To: Clean and shine coins with an eraser, vinegar and salt

In this how-to video, you will learn how to clean your coins to make them look shiny and new. This is useful if you collect coins. First, you will need coins, vinegar, salt, paper towels, a pencil, and a jar for the mixture. Take the coin and place it in the jar. Next, add a small amount of salt to the jar. Now, pour three caps full of vinegar into the jar. Mix it with the pencil and let it rest for ten seconds. Now, take the coin and place it on the paper towel. Use the eraser on the pencil ...

How To: Land a Nitro RC plane

First of all you have to loose the altitude by taking a circle or two around in the air. On the final turn make a good straight approach to runaway and don't use too much ‘ailerons’ then. Just use the controls ‘rudder’, ‘elevator’ and ‘throttle’. Also watch for the cars or the traffic where you are going to land. Keep constant low ‘throttle’. You have to maintain good ‘idles speed’. You might want to adjust and remember the trim settings. After touch down, don’t pull on elevator. Just cut the...

How To: Bathe your pet cat

Joey Garr demonstrates how to give your cat a bath. For this operation you will need to have ready a towel, Q-Tips, shampoo, a cup and some treats.

How To: Keep your microwave oven clean

This video demonstrates different ways of cleaning your microwave oven. Cleaning your oven is a very simple and easy task.1.Mix equal parts of baking soda and water. This acts a very mild creamy abrasive and the baking soda helps in deodorizing the oven. Dip a paper towel/rag and rub over the dirt to clean it up.2.Mix 2/3rd water with 1/3rd parts of white vinegar in a bowl and place it in the oven. Heat it up for 5 min so that the mix starts to steam. The steam loosens the dirt and the vinega...

How To: Start growing seeds in eggshells

When you start planting something, you will need to nurture and grow a seed. You can plant a seed in a small pot and transfer it later, or you can save yourself the mess and trouble and try the tips in this video. In this tutorial, learn how to plant seeds in an eggshell! Eggshells make great little planters and the best part is - they're biodegradable so instead of repotting your seedling you can just plant the whole egg in the ground!

How To: Turn an old door into a desk

Danny Lipford and Allen Lyle demonstrate how to turn an old door into a desk. First, remove the door hinges. Then, fill the biggest part of the voided hardware holes with wood and seal them with bonding adhesive. Don't leave too much excess bonding adhesive on the door or else you'll have to sand it off once it's dried. You may need at least two coats of bonding adhesive to get the surface level. Cut wood for the sides of the desk and then run them over a router. Sand down the door and the ne...

How To: Make a mini polymer clay birthday cake for a dollhouse

Garden Imagination shows viewers how to make a polymer clay mini birthday cake for your dollhouse. First you will want to start off with yellow clay and roll it out on your pasta machine at level 1. Fold this yellow clay in half and use a shape cutter to cut out the cake. You can find a shape cutter at Hobby Lobby and use a circle scare or any shape you want. Cut out two pieces - one for the top and one for the bottom. Next, you will want to use size 8 font on your computer and type "Happy Bi...

How To: Make fire & ice crystal bead earrings

Mark Nelson accompanied by Rio Grande demonstrate by the start where you need a wire with stiffeners to it of various colors. 3 pieces of different colors of wire each 2 ½ inches long is needed for the earring. Pick a clamp where you can pass the 3 wires twice. First push it half way once and put the other end back in the hole and pull the ends through. This can also be done in an asymmetric way. Now you add 6 beads in any combination of colors. Use it in a 2 mm length and then cut off the en...

How To: Remove acrylic nails

The first step in removing acrylic from nails is to cut nails down with clippers. Next file off gel sealer and seventy percent of acrylic with file or nail dimmer. The demonstrator then cut ten squares of foil, one for each nail. After the foil is completed cut cotton rounds into four pieces. You will only need two and a half cotton rounds. Using one hundred percent acetone saturate each cotton piece that you cut. Place saturated cotton pieces on each finger and then wrap securely with foil. ...

How To: Tape a sprained ankle

This is for an ankle that has been rolled to the outside of the body. Start by cutting a piece of rock tape that is about the length of the distance from the mid arch to right below the kneecap. To tape the ankle sit on a table put your heel on the edge of the table with your toes pointed down. With an ankle sprain this will be very painful so go really slow. Pull an inch of backing off the tape and anchor it about mid arch and then pull the backing off of the rest of the tape. Then with your...

How To: Install a toilet for your home

To install the new toilet you will need a putty knife, hacksaw, tape measure, adjustable wrench, level, sponge, and replacement wax seal. Before you begin removing the old toilet, turn off and disconnect the water supply to the toilet. Then flush the toilet to get the water out of it. Use a sponge to remove any remaining water in the bowl or tank.

How To: Make mini s'mores for a doll & a dollhouse

This video shows you how to make polymer s'mores for your dolls. With this method, it is quite easy to do. You need an off-white brownish clay to start, to use for the graham cracker. First, you warm up the brownish clay, and flatten it. You then need to give it some texture, using anything that has texture. After giving it texture, cut it into a rectangle. Next, you'll need a dark brown clay for the chocolate. Do the same thing you did for the graham cracker, except don't give it texture and...

How To: Make an awesome match rocket

In this video we are shown how to make a match rocket. You will need a lighter, a paper clip, a pair of scissors, tinfoil and some matches. Start with two matches and with the scissors cut the heads off. Using the stick of the match measure a square of tinfoil. Place the stick on one edge of tinfoil and roll a little lip around it. Remove the stick and place the heads in the lip that you just rolled. Place the stick in the lip behind the heads so that it is halfway off of your tinfoil. Now be...

How To: Make a roast or steak for a miniature dollhouse

In this Hobbies & Toys video you will see how to make a roast or steak for a miniature dollhouse. For this you will need some translucent white and pink clay. First make two snakes with the white and pink clay; the pink one thinner than the white snake. Slit one side of the white snake, place the thin pink one inside it and roll them so that the pink is inside the white snake. This makes the bone and the bone marrow. Next make a ball out of pink clay, slice in two and wrap both halves around ...

How To: Apply makeup after age 60 and look younger

Ronnie from Hollywood makeup secrets shows older women (Specifically 60 years and up) how to apply makeup and look young. She starts off with the tip that woman need to moisturize the face before applying foundation. She uses a liquid foundation that is used to moisturize and smooth out wrinkles in the face. The foundation is also applied to the eyelids to smooth out the veins on the eyelids. She then applies concealer that was warmed on her hand to the inner corner under the eyes. After appl...

How To: Make a pair of textured metal earrings

To begin take a 28 gauge copper sheet and cut out a pattern that you wish your earrings to be. Your pattern can be any shape that you wish. Cut out both earrings. Next sand your two earrings so that a texture will begin to arise on the copper sheet. Then you can color the copper with colored pencils to add the colors that you would like. Now with a break machine feed the copper sheet into the break in order to form the texture on the earrings. Then take a pair of pliers and exaggerate your pa...

How To: Make a rocket

In this video you learn to make a PVC rocket that can travel hundreds of meters high. You start off by cutting your PVC pipe 62 mm long. Next dilute some kitty litter in a bowl to make it damp to compress. This makes a plug. Plug the pipe with 1 cm of liter. Then you add the rocket fuel. Be careful not to mix! Compress until it is time to plug the other end with kitty litter. Next you drill a hole in the center of the pipe with a 5mm bit. Tape the pipe to a stick about 40 cm long. You then cu...

How To: Potty train your toddler easily

Parenting Coach, Nancy Stone provides a few tips and techniques for easing your toddler through the transition from diapers to being toilet trained. First off, Stone suggests allowing your toddler to help pick out their potty seat. Secondly, keep in mind that boys and girls are different - tossing a few Cheerios into the potty and letting your boy aim for them makes it kind of a game, which Stone says is important. Thirdly, ask your toddler quite frequently, point blank "Do you have to go pot...

How To: Replace a GFI outlet & how it works

GFI stands for Ground Fault Interrupter and is used in areas that have water. The first thing you should do before replacing anything electrical is shut off the power in the area you are working. When you remove the old outlet, you will notice a series of wires going into the bottom of the outlet and a series of wires coming out of the top. What is happening here is that the power is coming in from the bottom and then going out through the top. The reason for this is if something trips the fa...

How To: Prepare a pumpkin for cooking

Pumpkins are not just for Jack-O-Lanterns! Pumpkins very inexpensive right now since it is after Halloween! You can use pumpkins to make pumpkin soup, roasted pumpkin, roasted pumpkin seeds, etc. First, we will show how to properly cut a pumpkin. You'll need a big knife (the bigger the better), due to the vast diameter of the pumpkin. You also will want two buckets, one for seeds and one for flesh. Also, keep a garbage bag handy as a lot of garbage comes off of a pumpkin. They are messy, but ...

How To: Install a trunk override light switch in a Saturn car

In this video, Richpin demonstrates how to install a trunk override light switch in a Saturn car. When you open the trunk in a Saturn, the light turns on and there's no way to turn it off. Thus you must have a switch in the circuit so you can turn the trunk light off. Select an out of the way place to mount the switch so it doesn't interfere with your cargo. Find the blue connector. The red wire with the black stripe is the ground wire from the latch switch. First, disconnect the battery. The...

How To: Dress for a business casual interview

In a recent poll taken by an online recruiting company revealed that 37 percent of all hiring managers do not hire someone based just on the way they dress, more than half said they'd hold it against a candidate if they hadn't worn a jacket and seventy percent said that they wouldn't hire anyone wearing jeans, a leather jacket or a polo shirt to the interview. The rules for office dress code have changed, more and more companies offer their employees a business-casual dress code which makes i...

How To: Re-string a Floyd Rose guitar

In this lesson he shows the way to restring a Floyd Rose tremolo style system. You will need some Allen wrenches. Use an Allen wrench to take off the bolts at the nut area of the guitar which is located at the top. Next, loosen all the strings. You can simply cut the strings with a pair of wire clippers. The next step is to remove in strings from the tremolo. Use the Allen wrench again to loosen the screws holding the strings. There is a screw for every string. Once all of the old strings hav...

How To: Draw a hand from memory from the thumb perspective

SOLOMATION Cy Porter, the owner of the mentioned website demonstrates how to draw a hand from the thumb perspective. He says that this tutorial is to bring out the thumb's measurement and relation to the rest of the hand. First he draws the palm and the wrist, giving as a square shape to the palm. The he draws the first joint of the thumb saying that the center point of the line joining the knuckles and the wrist and the center point of the thumb's first joint forms an arc. Then he draws the ...

How To: Clean and used dried chiles

In this video from Gourmet Magazine, Ian Knauer shows us how to clean and use dried chilies. Chile de arbol is the spiciest. To make a great hot sauce, boil about 40 of these with the seeds in and blend with some garlic and water. Next is the chipotle chili. You can often find these in a can but they are more potent when fresh. The larger the chili, the less heat it contains. An ancho is like a poblano. A guajillo is often paired with an ancho in a recipe or an adobo sauce because they comple...

How To: Make king crab cakes stuffed with lobster tails

In the spirit of foods stuffed with other foods such as Turducken and macaroni and cheese stuffed meat loaf, comes this seafood inside seafood dish. This video tutorial shows how to make King Crab stuffed lobster tails. This gourmet meal is surprisingly easy to pull off, provided you’re working with some decent crustaceans.

How To: Do ab exercises for beginners

This video from fitness trainer Yuri Elkaim demonstrates a core workout for the absolute beginner. These exercises are good for people who have never worked out or who have sore back. He explains abdominal bracing, which adds stability to the core and spine, and works the muscles by contracting them. The first exercise is a bird dog. Get on your hands and knees and relax your spine and do an abdominal brace. Clench one fist and put that arm and the opposite leg out to the side, hold for five ...

How To: Make a pot roast

Michael Clark teaches us how to cook a perfect pot roast for those Sunday night dinners. 1. Prepare the ingredients and heat the pan to a medium high heat. 2. Put in 3 tbs. of olive oil. 3. Salt and Pepper the pot roast then set it on the pan. 4. After browning for 10 minutes on each side, remove the pot roast. 5. Still on medium high heat, add the carrots, onions and celery to the pan and cook for a few minutes. 6. Add the two wines and let the alcohol boil off. 7. Put in a can of tomatoes, ...

How To: Paint biker skull & crossbones nails

If you want to add interest to your nails, follow the steps in this video tutorial from Broadway Fashion Diva Nails. It shows you how to apply acrylic skulls, crossbones, and roses nails. The first step before application is to select nails that fit each of your fingers of one hand. Then, lay the nails out so that they are ready for application. Using pink gel glue, begin with your pinky finger. Utilize the tab to have control of the acrylic nail without actually holding the nail and getting ...