Severely Dry Search Results

How To: Paint a neon nail polish design

In this how-to video you learn how to apply neon color nail polish. The process begins by applying a base white coat and allowing it to dry. You use white because it brings out the neon the best. Once you have the base coat you begin applying the neon colors in any design of your choosing. If you use an outline it helps solidify your design and the results are much clearer. The entire process takes about six to seven minuets and is perfect for teenage girls.

How To: Style side hair spikes in 3 to 5 minutes

This video will instruct you step by step on how to style side hair spikes. Starting with a straightening iron you ensure all hair is as straight as possible. Once done you would apply hair spray where you want the spikes to be. Then you run your fingers up through your hair to get your hair to spike. Continue running your finger up through hair until the hairspray begins to dry and the spikes stay. Apply more hairspray as needed to make sure they stay. Very quick and easy to follow way to cr...

How To: Make chocolate crinkle cookies

In this video, he shows you how to make chocolate crinkle cookies. He starts out by showing you all the ingredients that will be needed for this recipe. He combines the butter and granulated sugar and mixes the two together and adds the cream slowly while he is still mixing the ingredients. Now the next step would be to add the cocoa powder and melted chocolate and mix those in. The eggs and vanilla extract are now added also and mixed in. Next the flour is slowly folded into the batter along...

How To: Make traditional Mexican salsa

Salsa is always a great appetizing treat to serve with chips or in a salad. This recipe for traditional Mexican salsa will provide the kick for your kickback. So kickback and learn how to make traditional Mexican salsa that will make your guests hot!

How To: Fix a wet iPod or iPhone

Have you ever dropped your iPhone or iPod in water? Learn how to fix it here. Water can be very damaging to electronics because of its conductivity. You can avoid short circuiting your device by following the directions in this tutorial. Discover why water can hurt your electronics and how to dry out a wet device from the inside out. Find out how to open the device and access the logic board. With materials as simple as a hair dryer and guitar pick, your device can be as good as new!

How To: Make raw vegan nori cheese sticks

This video demonstrates how to make raw vegan nori cheese sticks. First, put sunflower kernels, nutrition flakes, salt, olive oil, water, shredded cheese, and a whole jalapeno into a blender. Blend until the mix is paste-like in consistency. Slice sheets of nori into smaller pieces and spoon some of the paste onto the smaller pieces. Wrap them into little cylinders. Set them out and let them dry until most of the moisture from the paste has gone, and the stick is firm. This video is useful fo...

How To: Make fire with a magnesium fire tool

Do you want to learn how to make fire with a magnesium fire tool? Then all you need is a magnesium fire tool and this video. First of all, you need some kindling ready such as dry grass, small leaves, twigs, etc. Create a small pouch for the magnesium strips, then shave small pieces of magnesium into this pouch. Then, use your knife and move it against the flint side of the tool. This will cause a spark, which will catch on fire and the magnesium will assist in allowing this flame to grow. La...

How To: Get rid of acne with 5 easy steps

Acne is a problem for many individuals and by following these 5 simple steps, you can be on your way to nice, acne-free skin. First, cleanse your face gently and not more than twice a day. Do not pop your pimples, which could spread the bacteria and allow them to get deeper into your skin. Avoid using too much acne medication, which could cause your skin to become too dry and irritated. Also make sure that you use noncomedogenic products. Finally, a healthy diet that has the correct blend of ...

How To: Paint a funky pink & yellow paw print nail manicure

This how to video describes how to apply multi-layer nail polish patterns using common nail polish products. The process begins by applying a good base coat letting it dry and then applying other colorful designs on top of it then finishing with a top coat for shine. In this video they create a yellow and pink paw print that looks very professional. The whole process takes about 8 minutes to complete and is prefect for girls on the go.

How To: Make Filipino-style fried chicken

Max's Filipino style fried chicken. Takes a spring chicken or a Cornish game hen, ground jack pepper, dried bay leaves, cilantro or parsley, and a pan full of water. Bring water to a steam then add bay leaves and chopped cilantro. Then in a metal colander or strainer place chicken over the steaming water. Once chicken is steamed let drip out the excess water. Add the pepper and some salt to the chicken by rubbing over the surface. In cooking oil fry the chicken until a light golden brown. Tak...

How To: Clean dirty old coins

Meta Cafe offers fast and easy tips on how to clean filthy and old coins. All you need is: baking powder, a small, empty bowl, and a glass of water. Start by putting some baking powder into the small bowl. Next put some of your filthy, old coins into the small bowl, laying them on top of the baking powder. Then layer the remaining baking powder over the coins in the small bowl. Finally, pour the water into the bowl and let it sit for 10-15 minutes. Remove the coins and dry them using a paper ...

How To: Solder copper pipes the right way

Soldering is a handy skill to have at your disposal. You probably don't want to jump right into it without practice on some scraps, but you can learn how to solder copper pipes together. You will need to make sure that all of the pieces you are working with are clean and dry first. You then need to apply flux to the end piece and slide the joint piece onto the pipe and hold it in place. Now you are ready to solder your pipes. This video will show you everything you need to know.

How To: Barbecue brick chicken

To make barbecue brick chicken, start with a whole chicken. Remove the spine. After that, spread the bird apart and flatten with your hands. Then put it in a plastic bag and add any citric juice and marinate for 4-24 hours. After that, put in a baking dish and apply a wet rub. Coat evenly. Next, apply a dry rub. Taking two bricks, wrap both separately in two layers of aluminum foil. Place chicken on the grill skin side down and put bricks on top. Flip after 20 minutes and return bricks to the...

How To: Use agave nectar as a sugar replacement

Using agave nectar as a sugar replacement is a great idea if you are sensitive to sugar or are a diabetic. Agave sugar is a low glycemic product and is great with recipes that call for sugar. The first thing you are going to want to do is pull out your recipe and get ready to add the agave nectar. When adding the agave nectar you should put 2/3 of a cup for every one cup of sugar that the recipe calls for. The only thing that you should remember is that you should always add the agave nectar ...

How To: Deflesh the skull & antlers of a deer to make a mount

Looking to stick your winning game on your wall? In this two part tutorial, learn how to deflesh the skull and antlers of a deer and make it into what is commonly known as a Dry Skull, Desert, European, Texas, or Western Mount. Part one covers starting with the harvested animal, a typical plaque, discussing set-up and basic methods, the bone overview and the processes' start. Part two continues the defleshing of the skull base, tightening of the nasal bones, whitening, detailing, antler base ...

How To: Grill Dr. Pepper pork chops

Dr. Pepper isn't just for drinking anymore. It's for cooking! This is a super easy way to rock out with he Dr. Pepper! Check out this video tutorial to learn how to rock out and grill Dr. Pepper pork chops. Dried Cherry Cole Slaw and Dr. Pepper are the perfect pair with the char grilled pork chop.

How To: Paint the hood of Axon racing razorback racer

This video is on how to paint the hood of the axon racing razorback anti gravity racer and how to do some basic effects. I use the liquid masking method of Bob Dively and show how to use airbrushes such as Iwata in my other how to paint video. You can use this method with any paint from pactra to spaz stix and any color of black, blue, purple, green, yellow, silver, chrome, etc. I personally prefer Pro line (or proline) shells over their durability but there are other shells out there. Just e...

How To: Glue latex in 4 easy steps

This video tutorial belongs to the Arts & Crafts category which is going to show you how to glue latex in 4 easy steps. This is really easy and very fast to do. First you clean the surfaces using mineral spirit and a piece of cloth. Next you apply a thin layer of latex glue using a cotton bud or a brush. In the third step, you let the glue dry for about five minutes and then put the two surfaces together. And finally you apply pressure to the seam with a seam roller. That's it! The latex shee...

How To: Use a climbing rope for rock climbing

Climbing rope is a rock climber's lifeline. A specialty retailer can help you choose the correct climbing rope for your purposes. Learn how to use and care for climbing rope in this climbing video tutorial. Take action: determine where and when you will be climbing, keep rope coiled in cool, dry environment, and use rope wash is an excellent way to keep rope free of debris. Josh, the instructor in this how-to video from Live Strong, is an avid climber that resides off the coast in central Cal...

How To: Stir fry chicken and vegetables with ramen noodles

Forget the Chinese takeout tonight. Follow along with this cooking how to video to learn how to make stir fried chicken with vegetables and ramen noodles. This stir fry recipe is much healthier than any you would find at a restaurant. Watch and learn how simple it is to stir fry chicken and vegetables. Don't forget the ramen noodles.

How To: Cope, or cut, molding to fit your room

When installing baseboards, crown molding ("moulding") and chair rails, it's tempting to cut 45-degree miters at the corners and hope for a sure fit. The problem is that most walls aren't square. Joining two 45-cut molding pieces may give you a square joint, but a square joint may not work for your crazy corner. In fact, it seems like every wall is just a “hair” out of square. This problem could be due to a framing error or a buildup of drywall compound in the corner. But even a perfect miter...

How To: Create a French manicure using normal tape

Want to get a salon quality French manicure at home? This tutorial teaches you how you can get a perfect French manicure with regular clear tape. You will need base coat (Orly - calcium base coat,) tape or you can use those pre-made French manicure stickers, white polish, top coat. The trick to a perfect manicure is to wait for the white polish to DRY before applying top coat to prevent smudging. With this how to video you will be able to paint your nails in a perfect French manicure.

How To: Clean the condensate drains on your air conditioner

Check out this instructional home repair video that shows you a very simple way to clean the condensate drain on your air conditioner. If you follow these simple steps, it could save some money, not to mention the grief. If you have an A/C and have ever experienced a backed up condensate drain, you know what I mean. Avoid this inconvenience by watching this air conditioning tutorial video.