In this video, we learn how to install brakes, shifters, and grips. You will need: Allen keys, grease, a knife, and a grip to do this. First, attack the brakes onto the handles, then the shifter and the bolts. Make sure to grease the bolts before you place them onto the handles. Do this on both sides of the bike. Make sure you have everything on the correct sides, then slide the grip in. Customize the grip so it's the right length and cut it with the knife to do this. Once finished, connect a...
Not sure what a paddle shifter is? Well, if you own the 2010 Ford Flex, you are at least aware of its existence. You can switch your vehicle from automatic transmission to manual transmission in the 2010 Flex, and there's these things on the steering wheel called paddle shifters, which allow you to shift between gears without ever taking your hands off the wheel. Learn how to use them.
The cable that connects your rear derailleur to the shifters on your bike may seem too long, delicate, and complex to fix yourself. You may be right, but if you have some bike maintenance experience and want to try then this video is for you. It walks you through the whole process of replacing the cable in your rear derailleur. It is a long process, and elaborate, but will dramatically improve your shifting performance if your cable is old and worn.
This video teaches you how to do a check of your bike before you go on a ride, especially if you haven't ridden in a while. Before each ride, check the tire pressure with a tire gauge. Pump it up if it is low, and release pressure if it is too high. Also check the tires' condition, looking for worn places. Make sure the axle is properly seated in the dropout. Check brake pads for wear, or debris from the road. Remove debris with sand paper. Make sure brakes tighten enough to stop the bike and...
Use a 5mm Allen wrench and loosen the bolt holding the cable on the rear derailleur. Thread the shift cable through the cable stays and tighten it in the rear derailleur with as little slack as possible. Make sure that the adjustment screw on the shifter is in the mid point of the adjustment.
Racing games are always better when you have a steering wheel instead of just a handheld controller. And those old-school arcade racing cockpits? Even better. Matthew Boyer decided to bring the feel of a racetrack into his living room with this insanely awesome DIY arcade racing cockpit. He built the frame out of plywood and a real racing seat, then added LEDs, surround sound, and a 32-inch flat screen. The pedals, shifters, and steering wheel are laid out to match the measurements in his rea...
Tim Hawkinson is an artist who truly inspires. The Los Angeles based artist creates complex, whimsical sculptures with simple mechanics and basic materials. One of his most notable pieces is the art-world-renowned "Uberorgan", a giant football field sized, fully-automated bagpipe, cleverly constructed with plastic sheeting and pieces of electrical hardware.
