In this video tutorial, you'll find a demonstration on how to iron a skirt, using Primula Flex 1242 ironing table. The PRIMULA Flex 1242 ironing table has a working surface 120x42cm with a sleeve ironing buck. The board also features suction and blowing with stepless adjustment of air flowing, automatic interchange suction or blowing from the working surface to the buck in addition to heating of the working surface and buck. The technical parameters are as follows: Power supply 400V/50Hz, suc...
Watch this bookmaking tutorial to make a fun tiny sized art journal. You will need five sheets of paper, one sheet of card stock, two pieces illustration board of equal size, and a smaller piece for the binding. You will also need some decorative paper, glue, a needle and thread. These miniature journals are small but can hold a lot of information, depending on how you fill their pages.
Post cards aren't just for vacations. This video from Piece of Craft shows how to make hand made post cards any time you want to send a nice greeting to a friend. You will need a cutting board, glue, tape, a cutting mat, scissors, makers, pens, pencils, paper, and inspiration for what you want to put on your postcard. Watch this video paper design tutorial and learn how to craft hand-made postcards.
Check out this instructional electronics video that illustrates the simple process of reconnecting the ribbon cable on the iPod photo. There is a ribbon cable inside the iPod Photo that can sometimes disconnect from the logic board, but it can be reattached easily. Watch as one of our technicians illustrates this process and start listening to music again!
Check out this instructional electronics video that illustrates the simple procss of reconnecting the ribbon cable on a 4th generation iPod. Sometimes the ribbon cable that tethers both halves of the fourth generation iPod during the battery replacement process needs to be reattached to the logic board. Watch as one of our technicians illustrates this process and start listening to music again!
Check out this instructional electronics video that illustrates the simple process of reconnecting the 4th generation iPod hard drive. The hard drive inside a fourth generation iPod can sometimes come loose from the logic board, but it can easily be reattached. Watch as a technician from iPodJuice.com shows you how it is done and start listening to music again!
Bring all of the colors of the rainbow together with this cool color spinner. You and your child will learn how to mix colors to make new colors with this fun arts and crafts project from Crayola. You will need white poster board, a paper plate, a circle maker or compass, scissors, a ruler, markers, crayons, colored pencils, and tape. With this how to video you can teach your child about colors and science with this paper color spinner.
Toshio Iwai's "tenoir-on" is a really cool musical device, but is quite expensive and due to short supply. This version is an unplugged version, the creator has dubbed the "tenori-off." You will need a plastic board, vinyl pipes, and bubble wrap. Watch this video tutorial and learn how to build a tenori inspired tenori-off acoustic musical instrument.
Follow along with Dr Kreepy in this quick video tutorial on how to do cheap and easy tombstones for your home haunt. You will need a marker, a hobby knife or X-acto knife, a hacksaw, an electric rotary tool, black acrylic paint, black spray paint, white paint, a spray bottle full of water, a paintbrush, and foam board. Watch this video special effects tutorial and learn how to make a cheap prop tombstone for a Halloween decoration or a film prop.
Take a look at this instructional video and learn how to build a powerful pocket amplifier for your headphones out of a Altoids mint case. To make this contraption, you'll need a circuit board, jumpers, soldering tool, two 220 micro fahren caps, and two 10k resistors.
Want to learn some new skateboard tricks? Take a look at this instructional video and learn how to perform a melon on the skateboard. Before you attempt this move, you'll want to be familiar with executing ollies. When performing this skate board trick, you want to grab near the middle of your deck.
Having a hard time holding on to items that need welding? Then watch this how to video to learn how to make a quick foil welding machine. It is really very simple to make this apparatus that will help with your welding projects. All you need is two small boards and two screws.
Want to pick up surfing? Take a look at this instructional video and learn how to surf. This tutorial covers the fundamentals of surfing, including what wetsuit to pick out and how to get on the board.
Ever heard of skimboarding? Take a look at this instructional video and learn how to throw the board with Stephen Augustyn. This tutorial also covers a few tricks: the 360, the sit-down style, and the flip.
This week, Indy Mogul, Erik shows how to recreate the effect of someone crawling out of a TV. Just like in that scary movie The Ring. It's actually not expensive, just about $30. You will need scrap wood, poster board, tape, and flat bright green paint. Watch this video film special effects tutorial and learn how to make the effect of someone crawling through a television.
Want to know how to make your own children's jigsaw puzzles? Well, this video tutorial will show you how to make a jigsaw puzzle using the freehand scrollsaw cutting method. So, you have to have the picture on the wooden board already, then cut away the tiny pieces of the jigsaw puzzle using freehand saw cutting. It's easier than it looks. You just need a little craftsmanship.
Check out this instructional tutorial to learn how to trabop board, or use a skateboard on a trampoline. Get advice from this how-to video on how to mix two of your favorite activities: skateboarding and jumping on your trampoline!
Board-Certified Dermatologist and Skin Cancer Expert Dr. Coyle Connolly, D.O., discusses the importance of early diagnosis of skin cancer and performs a biopsy on a man's face.
Dr. Coyle Connolly, D.O., board-certified dermatologist and skin cancer expert removes a wart from a woman's leg for a skin cancer biopsy.
Board-Certified Dermatologist Dr. Coyle Connolly, D.O., removes a mole from a patient's back for a skin cancer biopsy.
Board-Certified Dermatologist Dr. Coyle Connolly surgically removes an abnormal mole from a patient's arm.
In this two-part soldering tip video brought to you by BEST, Inc. Norman Mier demonstrates the placing of a J-leaded component on a PLCC circuit board using lead-free solder.
In this soldering tip video brought to you by BEST, Inc. Norman Mier demonstrates how to install and solder properly a through hole component into a circuit board.
Some basics of removing and repairing an arcade monitor including: disconnection, tools for soldering, boards and caps.
If your home is not protected by impact-resistant windows and doors, or impact resistant shutters or panels, consider building your own temporary emergency panels. www.flash.org
Have a damaged trace on a PCB? Then see how to repair it.
Today's word is "zenith". This is a noun which means the highest point above the observer's horizon attained by a celestial body, or the peak.
Check out this video to learn how to play high major chords on the fret board of a ukulele! Part 1 of 2 - How to Play high major chords on the ukelele.
Hand soldering a QFN component is almost impossible unless you have the right tools. Among these tools is the SchmartBoard|ez prototyping board. Here we hand solder a .5mm QFN component.
Get your fingers working smoothly across the fret board and work out cool licks and note combinations you can incorporate into your playing by adding this Minor Pentatonic fingering exercise into your daily practice routine.
Check out this video from Berkleemusic.com and watch as Larry Bayone, Chair of Berklee's Guitar Department, explains how to find the notes of the guitar scale from memory by practicing the major scale in a variety of different positions and registers on the fret board.
Bet you never thought your surf skills may be polluting the planet. Educate yourself and recycle your board.
Learn all the right gear for snowboarding from thermal layering to a board.
A video for those of you just getting started. We talk about line and phono inputs, headphones, faders, crossfaders, RCA plugs, hooking up a laptop to play a program like Windows Media Player, stereo mini plugs, main outs, etc. Hook up your mixing board and turntables to your computer.
This video shows you how to care for your wooden spoons. Mineral oil is the best thing to use on your wooden spoons. Mineral oil also works for your wooden cutting boards and counter top.
Make the most of your favorite photos by showcasing them in a beautiful mat and frame. For this project you will need: a picture,
Check out this video review of the board game "Puerto Rico." Puerto Rico needs between three and five players. When you choose your role in Puerto Rico, you want it to benefit you more than your opponents.
Check out this how-to video to play the board game "Goa." Goa is for two to four players and lasts for ninety minutes. In Goa, each character takes on the role of a 16th century Portuguese spice trader (pretty specific, huh?) To win, you have to be the most efficient at growing your spice export business.
With portable devices being a necessity in modern everyday life, they may be subject to overuse, improper charging, or normal wear and tear. For those people who carry around their smartphone or iPod with them all of the time, how many times have you been out and about just to have your portable device die on you?
Watch this video for instructions on making the Yukki Cross Artemis scythe from the anime / manga Vampire Knight.
