Square Inch Search Results

How To: Create a frilled layers out of gumpaste for cakes

This video is showing how to create frilled layers on a cake. First you need one mini cake, rolling pin, one knife, one cocktail stick, rolling board, icing sugar, glue or water, and gumpaste to do this. First you have to roll out the gumpaste to very thin layer. Next cut it out round with the frill cutter. Next take a cocktail stick and then create wavy effect to the gumpaste. Sprinkle some icing sugar on the board to use it fast. Next cut the gumpaste. Next take the mini cake and apply some...

How To: Start a fire with the hand drill

John Campbell instructs the audience on using the hand drill method of starting a friction fires. First, you can use a piece of cottonwood as your fire-board (in his opinion, cottonwood is the best). You need to carve a small round hole about a quarter of an inch away from the edge on the fire-board. Then, you get the spindle going (take a sturdy stick and rub between your hands, scraping the stick across the board). This helps you create a good indention, where you can carve a deep notch int...

How To: Make a holiday "no knead" pumpkin bread

Chef John from Food Wishes demonstrates how to make no knead pumpkin bread for the holidays. First, add a half a cup of plain pumpkin puree, a cup of warm water, 1/4 of a teaspoon of yeast, 1 1/4 teaspoons of salt and a dash of pumpkin spice to a mixing bowl. Whisk the ingredients together. Then, add three cups of all purpose flour. Mix the ingredients with a spatula. Cover the bowl with a barely damp towel and let the pumpkin dough rise for 12 to 16 hours. Next, generously cover a baking she...

How To: Make a buckyball from folded paper with origami

To create an origami buckyball, you must start with a piece of paper cut into a triangle with each side about two inches long. Fold the corner of each side into the middle of the opposite side and then unfold to create creases that will be your guide. Next, fold a side up to the midpoint of the creases and repeat on all sides. This will create a star-like shape. Now, fold two sides in and pinch out the extreme, outer corner and repeat on all sides. This will create a small star inside your pa...

How To: Do an ROTC/US Military-style push-up

The Georgetown Army ROTC program first describes the benefits, and then demonstrates a proper army pushup to standard. Pushups are common in the army, they increase the strength and endurance of your chest, shoulders, and triceps muscle. The push up is also a part of the Army Physical Fitness Test (APFT). In order to be contracted and received scholarship benefits male cadets in the age range of 17 - 21 must perform 43 pushups while female cadets in the same age range must perform 19 pushups.

How To: Use the crop tool effectively in Adobe Photoshop

Kingsley Singleton teaches us about cropping images in Adobe Photoshop. He discusses the importance of properly cropping pictures, and the basic ways to do so. He first shows us how to properly crop images to ensure that printed pictures are the proper size for the paper. Clicking on the image and then dragging the marquis over the picture will select the area of the picture that you would like to use. Moving the corner arrows will adjust the size of the area selected. Then, to properly size ...

How To: Cut & plant potatoes

This video describes how to cut and plant potatoes in your own garden. Potatoes are easy to grow almost anywhere and can be started early in the year since they are resistant to cold.

How To: Destroy your (ex)boyfriend's jeans

Jessica shows you how to relieve some anger and stress by turning your ex-boyfriend's favorite pair of jeans into new low-rider, distressed, destroyed vintage shorts in this fun tutorial. First step: fray them on the pockets and seams by using an X-acto knife. Just scrape the knife along the edges of the pockets/seams, which will take around five minutes per 2-inch section. Step 2: distress them by taking a pair of scissors and making a cut in the both knees. Then take a seam ripper (availabl...

How To: Make a tiara-esque headband

Tiara-esque headbands are fun to make, and more importantly, fun to wear! You will need, 1 basic wide headband, 1 yard of cotton fabric, 1 yard tulle, flowers from the Crafts section, scissors, beads and rhinestones for details, a glue gun. Lay the headband over the fabric, towards the edge. Mold the fabric around the headband, leaving some extra fabric at the ends. Cut the fabric. Glue the fabric from the underside of the headband, and glue from end to end. Cut all excess fabric away, and tr...

How To: Put together a fall flower arrangement with roses

The flower god demonstrates how to arrange a beautiful rose arrangement for your fall table. A dozen yellow roses, greenery and safflower are used to construct this masterpiece. To begin you need a vase filled with fresh clean water. The flower god shows how to lace the stems of the greenery in and out of one another. The laced stems are then placed in vase and eucalyptus is placed throughout vase giving a cascading effect. Next it is time to prepare the roses. Thorns need to be removed off t...

How To: Make herbal lozenges

John Gallagher explains the process of making herbal lozenges in which need slippery elm bark powder and licorice root slices both which sooth the irritation of the throat. You need half a cup of water and two tablespoons of honey along with a small bowl and a dough roller. To cut the dough get a bottle cap and store them in a small metal container. Boil half a cup of water and put licorice according to the number of lozenge required and simmer it on a low flame for 10 minutes. Take 2 tablesp...

How To: Make a Santa hat bead from polymer clay

To make a Santa hat bead, begin with red clay and condition it by kneading it with your fingertips. Form the clay into a thick worm shape, with it being the thickest at one end then tapering off. Use your fingertip to make a shallow indentation on the thicker end, and remove any excess clay from the thinner end (total length should only be an inch or two). Curve the thin end over slightly to create a hook shape at the top of the hat. Take a small ball of white clay and make a small hole in it...

How To: Perform the cut and restored string trick

1. This video describes how to perform the cut and restored string trick. For performing this you need One "Scissor", "about 4 inch length of string", "one Straw" which you can get any restaurant or juice shop and "one X-acto Knife". Now actually prepare the straw, and the secret is in the straw in this case.

How To: Make chocolate fudge cake

How to: Make chocolate fudge cake. You will need 4 large eggs, 8 ounces of softened butter, 6 ounces of soft brown sugar, 2 ounces of golden syrup, 2 ounces of melted dark chocolate, one teaspoon of vanilla, 7 oz. of self rising four, 1 oz. cocoa, 1/2 tsp baking powder, and one tablespoon of water. For the frosting, you will need 1/2 pint of sour cream, 14 ounces of melted dark chocolate, and two 8 inch round cake pans. In a mixing bowl, add the eggs and golden syrup and mix. Next, add in all...

How To: Parallel park your car

Can you properly parallel park your car? Well follow along as we are given instructions on what to do. -It is best to begin practicing parallel parking when there are no obstacles and then trying with plenty of space between cars. -Eventually you will be confident enough to squeeze into even the tightest of parking spots. -Remember to always go slowly and adjust your car if necessary. -Always indicate which direction you will be turning by using your signal. -When the space is empty pull up b...

How To: Achieve good soldering joints

Learn how to solder wires with this video. Clean the area to be soldered, scraping the wire down to bare metal and then wiping it clean with alcohol or acetone. Use rosin-core solder for electronic applications. This solder normally comes in coils. Tin (coat with solder) the soldering tip first: Wrap one or two inches of solder around the tip while the iron is cold; set the iron to the solder's temperature range; and allow the solder to melt. Clean the tip with a sponge. Set the soldering too...

How To: Make Pakistani chilli achar/ pickled jalapenos

This video will show your how prepare your own pickled jalapenos in a Pakistani cuisine style also known as chilli achar. You will want to have 15 or 20 green chillis on hand which you will chop. You will need masala which you can make the masala by grounding all your seed until they are course. You will then want to cut and crush your ginger and garlic to gather. Heat up your oil and you can check by adding a little spice. Put the vinegar into the oil and cover for later. Chop your chilies i...

How To: Make crostini

Crostini is the Italian word for toast and is basically a fantastic canvases to put almost anything on top of to make easy and tasty hors d’oeuvres. This video will show you some crositini using Italian ingredients or other flavorful combinations. Watch this video to learn how to make a simple crostini. Great for picnics and parties! 12 slices firm white bread 5 tbsp. (75 ml) butter 2 tbsp. (30 lL) all-purpose flour 1/2 c. (125 ml) milk 3 oz. fresh mushrooms (about 9 med.), finely chopped 6 t...

How To: Solder a wire

This video describes how to solder a wire. The first thing you have to remember is that the wires should be cleaned, shiny, and bright. Then trim about 1/2-inch of the insulation of the wires and then make a secure mechanical connection. Next, put some soldering pencil clean and shiny 60/40 rosin core solder. Do not use 50/50 core solder. Start by making sure that the soldering iron is tint. Put the soldering iron underneath the joint. Heat tends to rise and then touch the solder to the joint...

How To: Make fairy wings

Feel like getting crafty? In this 8-part video tutorial, learn how to create the perfect pair of mini fairy wings, approximately 6 inches wide. Also included within these videos is how to make realistic-looking bat and dragon wings. To complete this project, you will need cellophane, plastic coated wire, acrylic paints, polyester glitter, and a glue gun. Add these wings to a doll or a wall craft for the perfect mystical embellishment!

How To: Make a spider sushi roll

This video explains how to make a spider roll. First, spread the rice for the spider roll. Make sure that the top and bottom edges have a thickness of 1/8 inches without rice, so that it won't squash it out when rolling. Then add some toasted sesame seeds. Place the rice patty vertical, with top edges empty, and place the deep fried soft shell crab into it. The claws and legs should be outside of it. Put some crab sticks, avocado and some cucumbers onto it and roll with leaf lettuce so that i...

How To: Make hot dog flavored sausage rolls

David, the one pot chef, shows us how to make a hot dog flavored sausage rolls. Firstly, the sausages are browned up using a frying pan but not totally cooked though. They will be later cooked in the oven. To make things easy, puff pastry is taken and is made to defrost and is cut it into two even pieces. Then, the sausages are taken and are lined up on the pastry and can be chopped off if it goes over the edge. Then on the next line you add a little bit of tomato sauce along with the mustard...

How To: Make spicy octopus sushi

In this how-to video, you will learn how to make Spicy Octopus Sushi. You will need nori, rice, masago, scallions, spicy sauce, tempura flakes, wasabi, lettuce, avocado, octopus, a table spoon and a mixing bowl. You will first roll up two balls of sushi rice into 1 1/2 inches in diameter. Wrap the balls with a third of a 1/2 sheet of nori. Close the ends with some rice to make the ends stick. Grab a small mixing container and spoon and add a small palm full of tempura to it. Add a few pinches...

How To: Make a T-bone steak

If the grill is going hot then it’s a perfect time to throw on a big t-bone steak. You can cook some potatoes right along with your stake. With this professional advice you can get really succulent and perfectly cooked t-bone with minimal effort.