Stainless Steel Search Results

How To: Make your own microphone blimp

In this tutorial, we learn how to make a microphone blimp. You will first need a shotgun microphone and a power module that attaches to the microphone. There will be low roll off switch on the bottom which is supposed to help with wind noise. Next you will need to build a blimp with a filter you can purchase from a farm supply store. Apply a steel reinforced putty to one side of it, and this will be your end cap. Place your microphone through this and then your microphone will become complete...

How To: Make simple wire hoop earrings

The video describes to make wire hoop earrings. Take a steel metal of anything and take a eighteen gauge wire and wrap a few length of it around the taken piece of metal which is cylindrical in shape. Cut the wire at the desired part and remove from metal.The wire takes the shape of a standard spring. Again cut it into two or three pieces. Hold the wire again and straighten the edge and after that once again bend it down holding at the place where bent begins. Put some on it to design and the...

How To: Bead a necklace with a pendant

This video will show you how to make a beautiful and dramatic beaded necklace with a pendant. She uses a sterling steel shield pendant but you can use any pendant you like. You can choose any type of beads depending on the look you would like to achieve. In this case hematite beads are used to create a medieval look. You will also want soft flex beading wire, needle nose pliers, beads, lobster clasp, and sterling silver spacers. Create a patter and then go to town with your beading. Try makin...

How To: Use stone to sharpen a knife

In this instructional video, the host will give you detailed instructions on how to sharpen your blades primarily using coarse, medium, and fine Arkansas sharpening stones. How to oil your stones, how many strokes on either side, and the different angles that can be used are just some of the helpful hints included in this short tutorial. The instructor also includes information on how to sharpen your knives in a pinch using any leather belt, how to align your blade's edge using a steel, and h...

How To: Wax, tune and detune your snowboard

In this video you will learn how to wax, tune, and DE-tune your snowboard. The first thing you're going for tuning and DE-tuning your board is to take a bill file and file your board right where it starts to curve (do this on every corner of your board). Then when you're ready to clean the base of your board you take your base citrus cleaner and pour some onto a rag and wipe it on the board until its clean. Then when you're ready to wax your board take your wax and melt it over the board usin...

How To: Make fire in multiple ways

In this Outdoor Recreation video tutorial you will learn how to make fire in multiple ways. For this you will need either cigarette lighters or matches. There are also a variety of fire making kits available with fancy strikers to produce sparks and chemically coated paper strips or ropes that catch fire easily. Another method is a fire piston. Put the ‘O’ ring on the plunger and some charcoal powder on the tip of the plunger and bang it in. when you pull out the plunger, the charcoal will be...

How To: Start a fire with char cloth

This video shows the viewer how to start a fire using char cloth and a fire steel. Char cloth is a fabric which burns/smolders very slowly. This makes it very useful for starting fires. The video suggests gathering dried grass. The smoldering chard cloth should then be placed in the middle of the grass. Blowing gently on the char cloth will increase the oxygen reaching the flame so will increase the chances of success. Waving the bundle of straw should also help. Remember to always wear glove...

How To: Build a fire when the electricity goes out

This video shows the viewer how to start a fire without sing matches or electricity. This is done by first selecting a fairly large dry log. The aim is to ‘chip’ or peel smaller pieces of wood off from this log. These pieces will burn more easily and as such will make it easier to start the fire – a small hatchet is a useful tool to use when breaking down the larger log. Once you have the kindling place it on an alcohol wipe. Then use a flint or a fire steel to ignite the alcohol wipe. Once t...

How To: Easily shape pizza dough

is a video presentation about "Shaping Pizza Dough" and to mastering great at home is shaping and stretching the dough. Put the dough in plastic cover for 6 to 8 hours in room temperature or 12 to 24 hours in refrigerator in an sticky form. Then, sprinkle little bit flour and peel the dough into small pieces. Then, take your fingers and punch down the dough and forming a round shape. By using the rolling pan, make smooth edge dough in round shape and then...

How To: Make a cheap grind box

For this project you will need 2 Wooden palettes (long as you can get), angle iron (coping made from steel), Sheet of ply (or any other wood will do fine) and the usual tools like nails, hammer and saw. Stick the two wooden palettes together using glue and make sure they're dry before using them. Cover them on all sides using the ply wood. Next, place the angle iron on the side of the top palettes, for grinding. Leave it all to dry and make sure it doesn't bend or break before using it.

How To: Avoid RV problems by cleaning your hookup cord

Gary Bunzer the RV Doctor shows how to avoid potential RV problems by cleaning your electrical hookup cord. Before you connect your RV to an electricity supply, make sure to clean and brighten the metal contacts on your shoreline cord. Use fine-grade steel wool to clean all surface corrosion off your cord's prongs. You can also use sandpaper, emery cloth or any other gentle abrasive. After you get the metal prongs clean and shiny, use a dauber or brush to coat the surface of the prongs with a...

How To: Make a sour patch apple martini

This video instructs the viewer on how to make a Sour Patch Apple Martini with candy garnish. To mix this drink you will need ice, vodka, apple schnapps, apple juice, and Sour Patch Kids candies. To start off, put some ice in a steel beverage shaker. You will then add one part vodka, one part apple schnapps, and two parts apple juice. Put the cap on, and shake vigorously. The video suggests, "Put ya booty into it!" Place sour patch kids (about four or five) in the bottom of your martini glass...

How To: Maintain a knife by sharpening it monthly

This video demonstrates how to sharpen a carbon steel knife using a whet stone. Depending on how much you use the knife and how you use it, the knife might need to be sharpened once a month or every other week. First the whet stone should be lubricated using water. Then place the knife on the whet stone at an angle as shown in the video and drag it up and down while applying ample pressure to sharpen it. Do not twist the knife. Depending on the hardness of the knife and the roughness of the w...

How To: Know the basic rules of knife sharpening

Corey Millligan takes you through the instruction needed for knife sharpening. He explains that all knives, regardless of cost, needs to be sharpened. He shows you the diamond steel sharpener. He explains the positions you can hold the sharpener and which one is best for beginners. You learn how to get and control the angel needed and how paying attention to pressure is important. Corey also teaches you how to sharpen serrated knives and different techniques for advanced sharpeners. Watching ...

How To: Use jump rings while making earrings

This video is about jump rings and making earrings. Jump rings have a cut in them so that they can open. To open, hold ring on either side of split with pliers. Add a slight twisting motion. Do the opposite to close. Rubber rings have no split and stretch. To make an earring, take a surgical steel French hook, open and attach jump ring to French hook. Add 3 more jump rings in succession. Add a bead on a head pin.

How To: Sharpen kitchen knives

Kirkwood Community College's Chef David shows you how to sharpen knives in this episode of gazetteonline presented by Gazette Food Editor Anne Kapler. Chef David takes you through the process of sharpening a knife using a whet stone highlighting common misconceptions associated with knife sharpening. He also speaks about the options available to lubricate a whet stone. The sharpening process is explained in great detail including the stance, angle of sharpening, application of pressure, using...

How To: Create a wrought iron rose scrapbook layout

Many wonderful things come from the workshop. However, it's hard to document this land of screws, sweat, and metal on the organized pages of a scrapbook. In this how-to video, Carmen pays tribute to her brother's workmanship and demonstrates how to create a page that tells a story of forged steel. So get out those photos of your favorite craftsman, some wire and a hammer and get ready to test your metal! Watch this video crafting tutorial and learn how to create a wrought iron rose scrapbook ...

How To: Play the pedal steel giutar

Our Expert Village virtuoso Bill Bassett tells you everything you need to know about the pedal steel guitar in this series of instructional music videos. He begins with a brief overview of its history, then introduces you to the strings, pedals and knee levers. You also get a quick overview of the copedent, a chart which illustrates the tuning and pedal setup. Basset wraps up with tips for playing chords, practice suggestions and a demonstration of how the pedal steel sounds with different st...

News: Ditch Your Mandoline for a Handheld Slicer Instead

At first glance, mandolines seem like such a good idea. After all, who wouldn't want a tool that can create picture-perfect and paper-thin slices of fruits and vegetables that would put even the sharpest chef's knife to shame? Your French fry game would never be the same. Salads would become works of art. Your casseroles would cook perfectly evenly, since the ingredients would be cut uniformly.

Food Tool Friday: Make the Best Coffee Ever in a Turkish Ibrik

Coffee is one of the world's most popular drinks, and its fans are also usually devoted to a certain method of brewing. Some love the Keurig, others the French press, and still others swear by cold brewing. However, one of the oldest and easiest ways to brew coffee is also one of the best. If you love coffee, you should really think about getting a Turkish ibrik (also known as a cezve).

Food Tool Friday: Keep Drinks Cool or Warm with Whisky Stones

Connoisseurs of hard liquor always face a dilemma: how do they chill their spirits without diluting the flavors? After all, if you've shelled out big bucks for a bottle of single malt, you really don't want to mess it up with an ice cube that has freezer burn. (As for refrigerating whisky, most people recommend against doing that: it can cause the whisky to "haze," or look clouded.)

How To: Cook a Moist & Delicious Thanksgiving Turkey Without a Baster

A turkey baster is one of those single-use kitchen items that most people only need once or twice a year (although you can use it for a few other things). You never seem to miss having one until the holidays roll around when it's time to cook your Thanksgiving turkey. But do you really need a baster to end up with a moist, delicious bird? The short answer is no.

Knives 101: How to Care for Your Knives Like a Pro

Ask 100 chefs what the most important tool in their kitchen is, and you'll get 100 chefs saying the exact same thing: their set of knives. For home cooks and professional chefs alike, nothing is more important (or exciting) than a good knife. A good knife allows you to work more quickly, more efficiently, more consistently, and more safely. And best of all, they're just a lot of fun.

How To: Play steel drums

In this video series, learn how to play the steel drums. Our expert, Alan Mark Lightner, shows you tips for beginning your steel pan music career. Learn the proper posture for the instrument. Alan shows you how to hit and strike the steel drum. Learn how to play notes and chords on this percussion instrument.

How To: Build a steel spiral staircase

Spiral steel staircases are extremely space efficient and sturdy, allowing people to climb to a higher floor by spiraling in a tight radius. Making one of these staircases requires some considerable skill in steel fabrication. This process involves cutting and molding the metal and using it to create a structure. Welding is also an important aspect to steel fabrication and can be used to build these spiral staircases.In this free video series, Wendell Moon, fabrication and welding expert, dem...

How To: Do a half side split

Paul Zaichik of Elastic Steel explains how to do a half side split. The half side split is a very basic technique. First, kneel on the floor and lean forward. Then extend one leg so that it is perpendicular with your torso and so that both your body and foot are at 45 degree angles. The other leg will remain bent. You can also lean forward so that both your body and foot are leaning against the floor. Bend the leg to match the other leg and rest in that position before extending the other leg...

News: This DIY Mini Tesla Coil Packs 380,000 Volts of Lightning

At one point in time, Tesla coils were actually used for things like wireless telegraphy and electrotherapy, but as technology advanced, they shifted to a slightly more enjoyable purpose—entertainment. What's even more entertaining than using a Tesla coil? Building your own. One of the best portable Tesla coils out there is this mini acrylic version by Daniel Eindhoven, aka TeslaCommander. It's made almost entirely of acrylic plastic, minus the steel sphere, and copper wire and tubing. When t...

News: Girl Plays Super Mario Bros. Theme on Ancient Chinese Instrument—& It Sounds Exactly the Same

Super Mario Bros. is one of the most renowned games in history. It helped resurrect a dying video game industry in the mid-'80s and still remains one of the best-selling video games of all time—one reason why the new NES Classic Edition is so popular and impossible to get these days. Its simple story of a plumber trying to rescue a princess resulted in a video game empire for Nintendo.

How To: Shuck an Oyster Without an Oyster Knife

There are few kitchen tools as elusive as the oyster knife. Many people—even seafood lovers—don't own one. If you do own one, it probably gets used so infrequently that it gets sent to the very back of the shelf where it proceeds to get lost. Then you accidentally find the knife once a month when you don't need it, but can't for the life of you find the sneaky little thing when you do need it.