This instructional lampworking video shows how to make flame worked coils of glass.Use a rod of cold, thick glass to wrap the curly-q around. Using a thin, molten string of glass, feed the melted glass into the torch flame as you slowly turn the cold glass rod. This will create a quick and delicate glass coil.
The glass artisan Jim McKelvey shows how he makes the beautifully elegant glass faucets using ancient glass blowing techniques.
Learn how to make colored glass with Corning Museum of Glass experts. Some glass is colored by the addition of a metal oxide, while other glass is colored by adding color to the surface in a variety of ways. This video clip covers five different ways to color glass.
In this video tutorial, viewers learn how to etch glass in 5 minutes. The materials needed for his procedure are: contact paper, Armour Etch and a paintbrush, glass and a sink. Begin by cutting the contact paper face up on a circuit mat. Cut it on medium speed and pressure. Then put the contact paper on glass. Work carefully to prevent any wrinkles and bubbles in the design. Now put the etching cream on in a dabbing motion. The etching cream will not run into areas that are not stuck down. Fi...
In this video, we learn how to cut a piece of glass with scissors, water, and a lighter. First, you will need to grab a lighter and place it under the piece of glass that you want to cut to heat it up. Next, you will place your piece of glass into a sink full of water and cut your desired piece. Make sure to cut carefully, as you can get hurt very easily when dealing with sharp edges of glass. Make sure you are keeping the piece of glass you are using completely submerged in the water, along ...
This is a Fine Art video tutorial where you will learn how to cut plate glass. Measure the plate glass and make sure the measurements are correct. Then place the guide along the line of the cut, take your glass cutter and score along the edge of the guide. If the plate is small in size, take the base of the cutter and place it underneath the score mark and apply equal pressure with your hands on both sides of the score. The plate will snap with a nice clean cut. Another way to snap the glass ...
See how to use a Multi-Mandrel and watch demonstrator Scott make a set of buttons in no time flat in this how-to video. The multi-mandrel hold several pieces of glass as they're shaped into buttons, beads, or the desired craft project. Watch this video glass-work tutorial series and learn how to make glass buttons using a multi-mandrel.
This two part lampworking video shows how to make a glass windmill. The base is 6 mm rod with 4 mm trim. The parts are joined with 12.7 mm heavy wall tubing and 8mm rod. This project took close to 2 hours to complete.
This two part video shows you how to build a multi-color stringer for making beads for lampworking glass necklaces.
Watch this lampworking video series to learn how to make a glass pendant with i/o frit dot on dot design. Frit is ground up glass rods. It comes in a few different sizes including powder form.
Watch this four part lampworking video series to learn how to make a glass honeycomb pendant with air bubbles. This is a good sized pendant, using amber purple and then backed with turbo cobalt. Demonstration and instructions are clear.
Discover the history and process of glass blowing with experts at the Corning Museum of Glass. This is for beginners who are thinking about blowing glass for the first time.
When you begin a hobby like custom framing or any other type of art involving glass, you will need to know how to safely cut and shape glass without breaking it.
Watch this video to learn freehand glass making techniques to catchy music. See how to use fire in a bending technique. Break the glass under a flame, put it back together, separate it, and clamp it to form a flat object. (You know how the patience process goes . . .) Learn how to make a pendant or an earring.
This tutorial will walk you through the steps of making stunning raindrop reflection images. Lindsay Adler (of Adler Photo Workshops) will cover equipment and techniques, and give you advice to make the most of your time. You don't need a rainy day, just the right preparation to create amazing raindrop reflection photos.
The implosion technique in glass blowing creates the effect of multi-colored fingers of glass within another piece of clear glass. This video glass blowing tutorial shows how to use this style to make a jewelry pendant. Watch as the glass is shaped over a flame to recreate the fumed implosion technique resulting in a necklace pendant.
Learn how to cut glass with The Corning Museum of Glass staff. Cut glass is often used to make beautiful stained glass windows.
Learn about chunk casting with Corning Museum of Glass experts. Chunk casting is a method of casting glass by packing a mold with chunks of glass and melting the chunks in the mold, instead of filling the mold with molten glass.
This video demonstrates the process of glass bead-making with artist Gail Kop. You'll need a torch, a mold and glass pieces.
In this video, we learn how to cut large format glass tiles. First, measure out where you want the cut to be on the glass, then cut it with a sharp X-acto knife. After this, use a glass cutter to cut the bottom of the glass and create a crack what will go down to the cut that you just made. After this, break the two sections apart and you will have two piece of tile out of your large one. You can do this on any kind of tile and it takes just a few short steps. When you're done, sand down the ...
This video tutorial shows how to make a cool beer glass out of a beer bottle. This is also a great trick for cutting the bottle; forget the glass cutter or tricks with string and acetone. Just pour oil up to the level where you want the bottle cut off and place a red-hot piece of metal into it. Because of the great heat conductivity of oil and at the poor heat conductivity of glass, it will expand at the edge of the oil surface, cracking in a nice even line. Watch this instructional video and...
Watch this three part lampworking video series to learn how to make a flipped honeycomb glass pendant. You fume with silver and make a honeycomb. Then use the backside for the pendant.
Watch this three part lampworking video series to learn how to make a dichroic glass pendant. Dichrotic means two colored. Cut up a piece of backed dichro and use tweezers to shape it. This pendant is easy and quick to make!
This lampworking video shows how to make a glass octopus on a spun glass mount. The colors used here are Northstar rust and butterscotch.
Check out this video to learn how to make a Murano style gold foil glass bead. Take a quick trip to Murano where bead artist Patricia Frantz shares how her discovery of Venetian glass and beadmaking changed her life. Then travel to the Glassworks Video Productions studio in Miami where we produced this tutorial on making a Gold Foil Bead. This demo uses Italian glass and gold foil to put a new spin on a traditional style.
Learn more about making glass cane with Lino Tagliapietra and experts from The Corning Museum of Glass. Though simple in origin, Canes are often put together to make very elaborate objects.
Watch this video for a detailed demonstration on three methods of cutting glass for stained glass making, or other projects.
Learn how to fuse and slump glass with Corning Museum of Glass experts. Fusing and slumping are two techniques that have been used for centuries, and can be used together or separately.
You don't have to throw out those glass jars! Every little bit counts, so you can feel good about making a small different if you start reusing your glass jars. Show Me The Curry has all the guidance you need to ensure that you get the most out of your glass jars and do your part to protect the planet. This video will show you how to resue glass jars.
The coolest way to do a shot? Drink it from a glass made of ice. Learn how to make a shot glass out of ice.
A quick tutorial on making a stained glass suncatcher from scrap glass. This is a nifty summer home project for stained glass enthusiasts and beginners alike.
Learn about ancient iridized glass and a method for creating iridized glass surfaces. This video is part of the exhibition "Reflecting Antiquity" at The Corning Museum of Glass (February 15 - May 27, 2008). Note: the method portrayed uses stannous chloride fumes, which can be highly toxic. Do not attempt this without proper protective equipment.
Watch this two part video series to learn how to make a stretched and pulled dichroic glass pendant with lampworking.
Learn how to bend glass fusing stringers in this video. This is a great demonstration for those interested in stained glass, lampworking or other glass projects.
The next phase of the holographic display is upon us, and Looking Glass is aggressively making sure that it's at the tip of the spear when it comes to leading that charge.
Personalize your drinking glasses by etching names and messages on them. Your guests will be so impressed!
The holidays are all about beautiful, jewel-tone colors and richness in all facets of dressing up, from sequined cashmere scarves to warm wool coats. The same richness should be appled to makeup looks.
Applying black false eyelashes is scary enough for most girls. But if you've been one of the brave few to venture out and stick on that wad of fake hair to your eye then you know that falsies can easily take your eyes from blah to wow. Falsies make your eyes look wider and more awake and are pretty easy to apply, so what reason is there not to use them?
Getting your dream job is reliant on impressing the hiring manager with a resume and cover letter. Make sure you tailor your resume for the specific job you're looking for, and format for maximum presentability. From title to reference, this video will help you get the job you've always wanted.
This lampworking video shows how to make a glass carousel with three horses
