Surface Search Results

How To: Knuckle a soccer ball

so the video is about how to knuckle a soccer ball. first of all, you need to kick the soccer ball with your foot. Do not kick the ball with the point of your foot, because you can not control the direction witch the ball is going to go. it is usually off target if you kick it with the point of your foot.

How To: Hide an ending knot in your quilt

This video teaches how to hide an ending knot in your quilt in order to keep it looking neat. You wrap the thread around the needle, pull it tight, push the needle through about a half inch of the surface of the quilt, and once it comes out the other side, tug on the string gently. There should now be a knot underneath the top layer of fabric. Cut off the tail end of the thread. If the piece of thread is showing through the fabric, poke your needle inside the quilt and push it past the thread...

How To: Use the star tip to decorate a cake or cookies

Decorating Tips demonstrates how to use the star tip to decorate a cake or cookies. Use a medium consistency icing and position the bag at a 90 degree angle. Hold the tip 1/4 of an inch above the surface of the cake or cookie. Use the count squeeze, stop squeezing and stop to create a delicate star look with a size #13 star tip. With a size #18 star tip, shorten the count and put the icing stars right next to each other to fill in a cake. Use different colored icings as accents. You can also ...

How To: Use Magic Glos UV resin & polymer clay

Polymer clay has become a very popular modeling material. This narrator uses magic gloss UV resin and a needle tool for this video. A silicone pad is useful for the mixing process. Once a small amount of resin has been squeezed out, you can sprinkle glitter onto it, spread it out and allow it to cure a little. Once this has happened, a pressed flower can be stuck onto the surface and sandwiched between another layer of Magic Gloss. Once hardened, the flower is encased in the clear layers. Thi...

How To: Get rocker rhinestone studded nails

The rhinestone studded nails will be more attractive. To make your nails a perfect complement to any acrylic or polished nails use your wildest imagination to make it more attractive. The following steps will help to make beautiful, rocker rhinestone studded nails. The first step is to clean the nail surface where you want the stickers to be placed. The second step is to apply a base coat, and the third step is to apply nail polish color. The fourth step is to peel off the stickers carefully ...

How To: Make yarn hair falls

Emily from Girlispoision takes us through crafting yarn falls, a new and interesting sort of hair accessory for girls and women of all ages. First, obviously, you need yarn. Second, you'll need a glue stick, for general construction. Third, you'll need a nice large flat surface on which to work. Spreading your yarn out into separate strands, all side by side, you then tie them around the middle, and apply your glue stick, to make sure it will be secure. After snipping it to the desired length...

How To: Perfectly hard boil an egg

This video goes through the steps needed to cook a hard boiled egg. Firstly, you will need to boil some water in a saucepan. You can then add the egg and boil for exactly 7 minutes; this will give you a slightly soft egg. Then, drain the water off and toss the egg around in the pan, which will crack the shell. Add some cold water to the pan and let the egg cool down, until you can pick it up. An easy way of peeling the egg is to roll it between your hand and a hard surface; you will now be ab...

How To: Create realistic texturing & detailing in Photoshop

Photoshop can be a daunting program with so many tools to use and details to adjust. This simple guide shows you how to create realistic textures and details on anything or everything you could ever think of by teaching you a few easy steps. He shows you how to take an existing texture and adjust the angles so that it fits perfectly on the surface you want. Then he displays how to add a bit of detail to make the object seem even more realistic by adding what looks like wear and tear on your f...

How To: Make and cook a perfect baked potato

In cooking, making a perfect baked potato is one of the simplest and easiest dishes to prepare. Most of the people would chip the potato with a fork on its surface and cover with some silver foils and would keep in the oven. But, this should not be done as it could result in dump inside the potato when you cut it with knife. Instead of this keep the potatoes for 10-20 Minutes in an oven without foils, which could give you a better and soft layer inside the potato. But in need to get a crispy ...

How To: Install a laminate floor (simulated wood)

If you like the look of wood floors but you are concerned about the durability of wood because of kids or pets then laminate might be the answer for you. Laminate is really durable and it is easy to install. The laminate is the same material that they laminate kitchen counter tops with and it doesn't have to be glued or nailed down. It floats on a foam pad. This allows laminate to be laid over almost any surface without a problem. The pieces now interlock and so you don't have to worry about ...

How To: Sink nails, fill in holes & sand with Lowe's

This video describes how to improve one's skill when performing home based projects with wood which is a useful skill if one wants to build a table, chair or even a box. In this video one will learn how to sink a nail, cover the hole and leave a sanded finish. For example it is important to drive all nails 1/8 an inch into the surface of the wood so the filler can cover the hole properly and avoid leaving sharp edges or uneven surfaces. Overall this video is simple, easy to follow and useful ...

How To: Fold an origami open box

Shanckthetank teaches you to make an “open box thing” using nothing but folded paper. Origami is an ancient Japanese craft using nothing but paper to make objects from the simple to the incredibly complex.

How To: Unstick rusted nuts and bolts

Never be frustrated by a rusted nut and bolt again with this foolproof removal method. Loosen as much rust as possible off the nut with a wire brush. Tap the sides of the nut with a hammer to help the rust separate and fall off. Apply heat to the side of the nut for about a minute. When the bolt is cool enough to touch, spray WD-40 on and around the nut and bolt. Tap the end of the bolt with a hammer to loosen the threads and allow the oil to penetrate. Wait another minute or so for the oil t...

How To: Make your own scratch holograms

Holography is the scattering of light from an object, which is recorded and reconstructed to create the hologram. As the viewer or viewing mechanism moves, the image appears three dimensional. This instructional video shows how to craft 3 dimensional holograms using scratched arcs on a reflective surface. Using a compass, a picture, and Plexiglas, you can create glowing images that shift and turn inside of a 2 dimensional plane. Who would of thought? Now you can make your very own holograms a...

How To: Make a rechargeable, solar-powered USB battery

An emergency battery charger for your mobile phone comes in handy, but it's not the ultimate solution; once it's dead it's useless (what a waste). If you want to really get off the metaphorical grid, you can follow the steps in this video to construct a more robust circuit that will not only bail you out of an inconvenient situation but also recharge in between uses. The simple addition of a low voltage solar panel and rechargeable batteries makes this possible. Enjoy!

How To: Make no-knead ciabatta bread

In this tutorial, we learn how to make no-knead ciabatta bread. First, place 3 cups of flour into a large bowl with 1/4 tsp yeast, 3 tsp salt, and 2 c of warm water. Stir all of these ingredients together, then place a piece of foil over the bowl. Leave this in the room covered for 18 hours. After this, the dough will be bubbly and soft. Punch the dough down with your spatula, then oil a sheet pan and sprinkle it with corn meal. Then, spray your work surface with water and place plastic wrap ...

How To: Make an easy art journal

In this video, we learn how to make an easy art journal. You will need: card stock or thick paper (10 pcs), fabric, scissors, ruler, clips, string, and a button. First, fold your paper in half and push down the crease so the paper stays folded. Now, lay your fabric down onto a flat surface and measure it out so it fits over the paper while laid flat. Now, place marks an inch into the side of the crease of the paper. Now, line the edge of the fabric up with your paper and mark on the fabric wh...

How To: Airbrush a cake

Have an airbrush machine just for baking. Be certain that it is always clean. Cover the surface where you will be working as the color will fly. Cover around the cake and behind the cake. You can use newspaper, butcher paper or a disposable tablecloth. Pressure, angle and speed are very important when using an airbrush. It is best to practice. The more practice, the more comfortable you will become with the airbrush. Draw what you are going to put on the cake to use as a guide. Put just a bit...

How To: Make pizza dough and style with your favorite toppings

Chef Hubert Keller is known for his ingenuity in cooking, like when Frank Sinatra came into his restaurant and ordered something not on the menu — a pizza. Quickly, he had to come up with a great pizza recipe and this is what's come of it. Check out the recipe for this mouthwatering pizza from Chef Hubert Keller. You learn the whole process, from dough to sauce to baking.

How to Play Battlefield: Bad Company 2 - Ch. 12: Airborne

This is it. The last one. The last mission in Battlefield Bad Company 2. Airborne. This is where you and your unit finally find the scalar weapon. If you're scared of heights though, this might be the most terrifying mission of all, with a freefall plummet down to the Earth's surface. Yo have to shoot and kill Kirilenko when you're falling, too, so don't panic. Watch this video walkthrough to learn how to complete the Airborne mission in Bad Company 2 on the PS3.

How To: Macrame a Chinese flat knot

In this Arts & Crafts video tutorial you will learn how to make a western Macrame or a Chinese flat knot. Both are one and the same. For this take two different color threads, say black and blue bend them and pin them to a flat surface with a safety pin so that the threads are free to move. For this example, black is outer and blue is inner thread. Take the right black and put it over the blue threads. Now put the left black over the right black, then under both the blues and pull it up throu...

How To: Make a mold for a carbon fiber part

The website carbonmods.com shows up how to make mold for carbon fiber parts. Find a place you would want to put the boards to proceed with the action. Then take the shaping clay and put all around the edges. Cut off all the excess clay to become smooth and lay it out. The next step is waxing. Wax the board about five times, resting five minutes within each wax. apply the blue fluid to clean off buildup. It takes about 20 minutes to dry. To get the surface dry, mix gel and hardener in the same...

How To: Make a gum paste anemone

In order to make a gum paste anemone you first should roll out the gum paste onto a flat surface and cut out about 13 circles of this with a cookie cutter. Use thin foam and ruffle 12 of the petals leaving the last flat. Place your ruffled petal on thick foam and drag a ball tool over the bottom half of the petal. This will give it an oval shape. Now, put these into a flower former. Now let the 13th petal that is flat down to dry. Let these dry for about 2-6 hours but not until they are rock ...

How To: Bathe a your gentle newborn baby

How to Bathe a Newborn Baby Patty Siegrist shares some tips on how to bathe a newborn baby on this BabyCenter video. Set up for the bath by setting the room temperature to 74 degrees 15 minutes before the bath. It is safe to bathe a newborn in a tub after the umbilical cord stump has fallen off.

How To: Make an easy and simple wallet out of paper

In this video, you will learn how to make a wallet out of paper. First, you will need a piece of paper, a pen, a straight edge, and something to cut the paper. Place the paper on a flat surface. Fold the paper in half, hamburger style and unfold. Fold the bottom half up to the middle crease. Now fold the top half to the middle crease. Fold this in half again and fold it in half one more time in the hamburger style. Now, unfold the paper. Draw lines where you need to cut the paper. Once this i...

How To: Use a car jack to replace a tire

Everyone who drives should know how to use a car jack in case of a flat tire or blowout. Check your owner's manual to find out where your car jack and spare tire are located. In most cases, they are somewhere in the rear of the car. The video shows us how to use a telescoping jack, though the more common type of jack requires a scissor motion to raise the car and lifts from the side rail. The telescoping jack lifts from the axel and to raise the jack you need to insert the rod into the hole n...

How To: Land a basic ollie on a skateboard

Ollie' is one of the most basic tricks. 'Ollie' is done in a forward direction. You have to stand with your right foot forward and the left foot in the back to move in the forward direction. If you are regular then you have to stand in the opposite way as shown. There are two different types of 'Ollie'. In this one you have to snap the tail down to create a pop. You don't have to put in a lot of force into it. At the same time your right foot must be in the middle or a little forward on the s...

How To: Bake a simple homemade bread

Make an easy, simple bread that will taste better than store-bought stuff. Ingredients: - 3 cups of flour- 1 tsp of salt- 3/4 tsp of yeast, and 1 1/2 cups of water Steps: 1. Mix together all the dry ingredients. If the yeast you used is bread machine yeast, mix it in normally. If it's normal yeast, which means it's a bit bigger, dissolve it into the water first. 2. Add the water, and mix it together until you can form it into a fairly uniform ball. 3. Cover and let it rise for 3 to 5 hours. O...

How To: Make a DIY violin music themed party centerpiece

This do it yourself centerpiece is brought to you by A-Bnc parties and more. This starts of by making the bow, shown by painting a dowel and letting it dry. Then glue the 'frogs' at the ends of the dowel and glue fishing line to both frogs and trim to fit. Next take a polystyrene cut out of a violin and seal it. This helps paint stick to the surface of the cut out. The violin is painted brown to replicate an actual violin. Using black paint you detail the 'f' holes and allow to dry before pro...

How To: Make Filipino pandesal bread

Take bread flour add little sugar salt and baking powder to it. In another bowl take fresh milk add yeast and sugar mix it thoroughly and leave it aside for 10-15 minutes. Mix the dough. to this add egg, melted butter and cooking oil to it and leave it for 10 minutes. To this add the mixture of yeast and milk which was already prepared. Knead the mixture well and by covering the bowl with a cloth leave it aside for an hour. Now on a flat surface put some dry flour and knead it properly. Now m...