Plumbing is best left to plumbers. The results of DIY plumbing are almost always disastrous. However, with the help of this video, you can do a little self-plumbing by diagnosing the cause of your noisy pipes. The video also explains, in general terms, how to fix each type of noisy pipe.
In this Autos, Motorcycles & Planes video tutorial you will learn how to install a Borla exhaust on a Ford F150. For this you will need a 15mm and a 10mm wrench, a 15mm deep socket, a 10mm standard socket, a ratchet, safety goggles and work gloves. First remove the spare tire and the heat shield. Using the 15mm wrench loosen the nut on the clamp on the muffler. Unbolt the hangers from the vehicle and remove the kit by turning it counterclockwise. Next put the new exhaust in place, take the sh...
This is a great instructional video on how to build an 8000 lumen CFL and makeshift rain shield. First you need build a PVC frame. For that you will need 3-3/4 'T'S, 4-12" 3/4 pipes,2-2 1/2 " pipes and 4-3/4 caps. You will also need 1-1 " 'T'. 2- 1" 1" pipes and 1-1"-3/4" reducer. Hold the job in a mechanical vice and cut the material into required sizes and make the snap fittings. Then friction fit the rest of the components into this stand. Then lastly you have to make the light box. That i...
Soldering copper pipes is an important skill for many home improvement projects. Tim Carter of AsktheBuilder.com shows you how to solder copper pipes to get a water tight seal.
Back when CRT and plasma monitors were still a thing, screensavers served a purpose beyond just aesthetics: the moving images and patterns prevented static images from being burned into the display.
I actually have a lot of shoes, and putting them on the floor in my closet just makes for a very large mess, and makes it harder to find a matching pair. So, this simple yet cool DIY shoe storage is actually something I could benefit from doing. This project shouldn't be too difficult to complete. You can get PVC pipe from your local hardware store and either have them cut it, or you can do it at home if you have a table saw. You can also opt to buy concrete forming tubes, which may be a litt...
This video starts with a new Dwarf Fortress fortress, and will show you how to deal with underground rivers and magma pipes.
Stephanie and Julie teach us how to unclog a toilet the correct way in this video. First, remember to turn the valve off on your water that goes to your toilet. This will help prevent unwanted floods in your bathroom. You will also need a plunger, making sure to take the lip out for better suction. After you stick the plunger into the toilet, plunge rapidly around twelve times. If this doesn't work, try adding more water and plunging again for around twelve times. If it still doesn't work, yo...
Build a track dolly for about £80. This is great for getting professional dolly shots when making your own films.
Take on the challenge of home plumbing repair- how else are you going to get an excuse to use a blowtorch? Watch this video to learn how to solder, or "sweat", copper pipe. Make simple plumbing repairs a breeze by learning the basics.
Like many of the levels, you will need a friend to help you collect all of the prize bubbles on Pipe Dreams. Many of them are hidden on this level, and don't be afraid to toss your friend (or sackbots) at the wall.
Cake decorating requires A LOT of materials. But that doesn't mean you have to purchase everything you use. In fact, you can make many of the things you need, including your icing bag.
This is an easy and simple dolly you can make with just a few lengths of PVC pipe and some wheels taken from a pair of Rollerblades. You'll also need a few pieces of hardware to attach it, like screws.
In this video, we learn how to make & decorate an American flag cake. To make the cake, you will need a cake pan that is in the shape of the flag. After you bake the cake and it has cooled off, then mix up red and blue frosting to go with the white. Use a pipe with frosting in it to start to pipe the different colors for the stripes onto the cake. Leave a small square where you can put the stars. Then, use a star pipe to place on the stars to the upper corner of the flag, then let it set and ...
Easter is over, and what to do with all the plastic eggs that hold candy? You can always recycle them and turn them into a bumble bee! This craft requires 2 googly eyes, one black pipe cleaner, one white, gold or silver pipe cleaner, a stick and some glue.
In this tutorial, we learn how to make a prop light saber. you will need rubber o rings, a metal pipe, a dow rod, and attachments to combine the rods together. First, grab the metal pipe and dow rod, and place the rod inside of the pipe. After this, use an attachment to combine the two together. Next, cover one end with duct tape. Now attach two endings onto the rod and place a longer dow rod covered with duct tape onto the rods. When finished, use the o rings to keep the blade in place and y...
In this clip, learn how to fill your own piping bags and ice cupcakes freehand that are so beautiful that everyone will assume you bought them at a bakery. Follow along with this step by step and get started icing like a pro.
In this tutorial, we learn how to craft a pom-pom ladybug with your kids! The materials you will need are: 1 large red pom pom, 1 medium black pom pom, 1 pipe cleaner, 2 googly eyes, and one piece of lace. Start off by gluing the black and red pom pom's together with a hot glue gun. Next, use a hot glue gun to glue the googly eyes onto the black pom pom. Now glue black pipe cleaner around the red pom pom to make a stripe on the back of the ladybug. cut the pipe cleaner into little round shape...
If you live in a small apartment or condo unit, you have a very small amount of space to grow or enjoy plants. If you're looking for a good solution to adding some green to a balcony or window seal, this video may be for you. In this tutorial, you'll find out how to easily make a hydroponic garden using a pvc pipe. Check it out, good luck, and enjoy!
Connecting pvc pipes may seem like an easy task, but in fact it can be a difficult job for anyone who may not have done it before. It involves time, patience, and the right tools needed for making sure you have a leak free fit. So check out this tutorial on how to properly fit your pvc pipes. Enjoy!
If you have a broken sprinkler system, it's a good idea to fix it as soon as possible. Depending on what the issue is, one of the most common problems involves an issue with being properly connected. In this tutorial, you'll find out how to glue together pvc pipes using easy to find and use common items. Enjoy!
Get crafty this weekend with your kids by incorporating a fun arts & crafts project into the mix of weekend activities! In this Simple Kid's Crafts tutorial, learn how to make an adorable pencil topper out of pipe cleaners! This activity is perfect for children kindergarden age and up. Spend some quality time with your children and help get their creative juices pumping with fun arts & crafts projects like this one!
In this video, our author, Jimmy Jacobs, shows us how to build a quarter pipe. He shows use many ways to grip the shovel to form our quarter pipe such as “the granny” or the “railroad”. Please make sure your shovel has a sharp tip, otherwise this will be difficult. From here, just repeatedly hit your pile of snow with the sharp tip of your shovel to smooth out the surface. It is important to note that you it helpful to build your pile first, instead of trying to smooth the snow before...
You can make your own canopy for your boat and save hundreds of dollars from the store bought ones. You’ll need 1 inch pvc pipe, some nuts and bolts and you‘re set. You’ll set you’re canopy off of some swivel brackets that secure on the pvc pipe with 2 inch screws. This video will show you how to rig everything and you’ll be sitting in the shade in no time.
You can make a rocket at home using these items found around the house. Icing sugar, measuring tape, a PVC pipe, black marker, hammer, flat headed bolt around 18 millimeters wide , mortar and pestle, drill, drill bit size 5 millimeter, potassium nitrate and kitty litter.
If your replacement faucet is not the right size, pick up a connector and fitting from the hardware store. You will also need wrenches. First turn off the water supply. Then, brace the pipe with a pipe wrench. Use another wrench as a lever and remove the faucet. Take a piece of plumber's tape and wrap the brass connector. Make sure you thread the tape in the same direction that you screw on the connector. Screw the connector on by hand and tighten it with a wrench. Use the other wrench to kee...
This informational video from YouTube user curlmarx takes us through the step by step process of how to take on the intimidating process of soldering, or "sweating" copper pipes for the do it yourselfer at home. He illustrates the materials and tools you will need to successfully complete this type of plumbing project. Those of you who have never taken on a task like this will much appreciate the effort of this author to illustrate the complete process in a detailed and easy to follow informa...
It's amazing what you can do with a Pringles can! So many things, and if you own a bicycle, that Pringles can attract some serious babes!
Learn how to make this fun Christmas craft! To make a candy cane Christmas tree ornament, wrap red and green pipe cleaners around criss-crossed candy canes, curl the ends of the pipe cleaners and glue small bells to the front. Hang up a handmade candy cane ornament by one of the candy hooks with instructions from an experienced craftswoman in this free video on Christmas crafts.
This is an instructional video to help demonstrate how to sweat solder copper water tubing in plumbing repair. If you can't be bothered to hire a professional plumber for all plumbing repairs, this video guide shows you how to do the work yourself. You will need a gas or propane torch, copper or brass fittings, copper tubing, gloves, solder paste, solder, pipe cleaner, and a pipe cutter. Learn how to sweat solder copper water tubing for plumbing repair.
Evenin' Gov'na! How lucky you are to have that datascope (a.k.a. computer); for now you can build yourself some SteamPunk Goggles for your next bioscope (a.k.a. movie)! You will need an old wallet, metal pieces, two plastic water bottle caps, old clock parts, an electric motor, mini tires, plastic pipe, an LED toggle switch, and a pair of sunglasses. Watch this video fashion design tutorial and learn how to make a pair of steampunk binocular style goggles.
Feeling a bit like Bonnie or Clyde, without the reckless disregard for human life? This mini machine gun is a great prop for Halloween or a homemade action movie. You will need a joystick, pipe, cardboard, a small box, PVC pipe, a cylindrical box, a hot glue gun, a sharp knife, and a stand. Watch this video prop-making tutorial and learn how to make a mini machine gun.
In this DIY tutorial, Joe Schmidt demonstrates how to install a drain system. He then explains different ways to configure the drain system for your own situation. Why hire a professional to install your drain pipes when you can do it yourself with this how to video?
Ask the Builder host, Tim Carter, shares a quick lesson to help you out of a tough spot when working with plumbing vent pipe. If you're installing a sink, and need to follow the codes, then just work around it with this trick.
Summer is here, and with the season comes more freedom and searing heat. It's the ultimate between-a-rock-and-a-hard-place situation. You want to be outside and enjoy the sun, but you don't want to be over-powered by it. Thankfully, you can create makeshift misters on the cheap to enjoy the summer heat right on your deck.
First of all put a bucket under the trap. Now use your hand to loosen the handle of the PVC type trap. Loosen both the two plastic nuts on the ends. Remove the nuts that are holding to the drain pipe. Now when you remove this trap from the drain pipe a little dirty water comes out of it which gets collected in the bucket. Now check the trap for some hair and other clogs. This you have to remove and clean it out completely. Also check the drain pipe outlet for removing any hair or other clog. ...
In this tutorial, we learn how to build your own prop shotgun. To make this, you will need: one 2x6 that is 2 feet long, one 1x3 eight inches long, two 8" diameter PVC piping 2 feet long, two one inch PVC end caps, picture hangers, assorted nuts, bolts, and crews. First, draw on the shape of your gun on the pieces of wood, then cut them up with a saw. Then, cut out a prong shape in the front and stain the gun to your desired color. Next, connect all the pieces together and attach the wall han...
Christmas is The holiday of the year for many bakers, as the festive occasion offers more than enough excuses to bring out their best cookies, cakes, cupcakes, and yummy desserts. All red and green and Christmas-themed, of course. Christmas allows those creative juices to flow, but offers up very specific icons to work with.
In this clip, learn how to make a fast, cheap and super easy mount for your your bicycle to display safety lights. Wearing bike lights at night will help you stay safe in the dark and if you want to avoid the cost of getting lights custom fitted, this hack is perfect for you. All you will need is some PVC pipe and some grip tape (like the kind used for tennis rackets). Follow along and get started. This mount is flexible and fits most standard lights or flashlights.
In this video, we learn easy cake decorating tips and ideas. To make a pastry cone, you just need parchment paper! First grab a square of parchment paper then fold into a large triangle. Now, open the square up and cut where the line is in the middle. Grab one of the triangles you just cut and wrap it into a cone shape, taping the tip so it will keep shape. You can now add icing and will be able to pipe and write words with ease. Cut a small hole depending on what type of piping you want to d...
