Partiers everywhere have played pin the tail on the donkey. Now you can play, too. Just check out the steps and tips in this how-to video and learn how to play this classic kids game. The only supplies you'll need are tape, a paper donkey (or a variation), players, a paper tail for each player, and a blindfold.
They say cheaters never prosper, but how will your know for sure if you don't give it a try? By a little repositioning of the blindfold and some spacial awareness you can be the master at this classic party game.
In this Music & Instruments video tutorial you will learn how to restring guitars with a stop-bar tailpiece. The video shows how to do this on a solid body electric guitar. First, with the Planet Waves pro winder rotate the tuning key button clockwise to release the tension on the string, then pull the string put. Now slide the new string through the back of the tail piece, place the tail piece back in to position, pass it through the tuning key post and pull it tight. Wrap it around behind t...
Make your underwater dreams come true by turning yourself into a bona fide swimming mermaid. If mermaids did exist, you would be the perfect candidate to transform into the mythical creature. So check out this video tutorial form Little Orca to learn how to make your own mermaid tail costume.
Looking for a stylish, slightly menacing way to store your keys? The "rattlesnake tie" is in actuality Clifford W. Ashley's Over-And-Under Heaving Line Knot or ABOK #541. That said, the rattlesnake tie is a whole lot easier to say and remember, so that name is used here.
Ever wonder how to estimate the length of tail when knitting? Watch this knitting demonstration video and soon you will be a pro at estimating the length of tail.
Take a look at this instructional video and learn how to use a glitch that allows Link to scroll past walls and obtain the key item in the Tail Cave dungeon. From the classic Gameboy game Zelda: Link's Awakening, this glitch occurs in the sidescrolling boss pit screen in the first dungeon.
To mount a turkey tail you need borax, pins, hair dryer, pairing knife, cardboard and detergent. You must clean the turkey tail and then mount it.
Make a deer tail mount on felt. This video shows the steps of taxidermy from the skinning to the mounting of the deer tail.
In this video tutorial, viewers learn how to cook lobster tails. Users can choose to bake or broil the lobster tail. Begin by cutting the outer shell of the lobster tail. Users should cut vertically down the middle and horizontally at the bottom of the tail. Take the tail meat. Now users can choose to add some seasoning or flavoring to the tail. Another way to prepare the lobster tail is too just cut the tail vertically in half and leave the shell on. This video will benefit those viewers who...
Grilling lobster tails is quick and easy thanks to this easy method from Chef Jason Hill. Many people are intimidated on how to cook lobster, but grilled lobster tails are an impressive and simple way to go. If you have a Maine lobster or other variety of lobster, simply split the tails in half and rinse under cool water. Lobster tail recipes are best when made with a scampi-style butter, garlic and parsley sauce. Hill's recipe for grilled lobster tails uses this method, first by cooking lobs...
Here is a step by step tutorial for making a swimmable mermaid tail. Check out Video #2 for a demonstration of the tail in use!
Dan "The Lobster Man" Zawacki demonstrates how to make campfire lobster tails. First, quarter lemon halves. Then, butterfly the lobster tails by pushing on the tail. Use shears and cut the underside of the lobster down the middle. Flatten the tail a little more and use a knife to slice the lobster open. Pour clarified butter onto the lobster meat and squeeze lemon juice onto it. Butterflying the lobster will make it cook a lot faster in its own juices in the shell. Wrap the buttered lobster t...
This video will teach you how to make a curvy fox tail for a fursuit! From the Creator:
In this tutorial, we learn how to do a messy hair bump pony tail. To begin, you will need to straighten your hair all the way through with a straightener. Next, you will push your hair back and tie into a pony tail in the back. As you are gathering your hair for the pony tail, comb the top and sides so it's smooth and bring your bangs out on the sides. Now, take your straightening iron and curl the back of your pony tail in different one inch strands. Don't worry about making this look perfec...
In this clip, learn the easiest way to sew a tail onto a costume. Whether you are dressing as a bunny, bear, lion, tiger or anything else with an animal bum, check out this tutorial. This video covers fluffy tails like rabbits and long tails like cats and tigers. Have fun!
In this tutorial, we learn how to remove a turkey tail fan. Get the tail fan and spread it out, then hold the secondary tail fans and cut the tail fans out. You will want to cut at the base of the turkey where the but is, skinning a little bit to get it out. The removal should be pretty quick and simple. Before you do this, you should prepare the turkey by hanging it upside down on a tree. Keep the tail fan in borax powder until you're able to properly store it to make a trophy out of it. Thi...
Burhop's Seafood near Chicago, Illinois offers full instructions for preparing delicious, rich lobster tails for a gourmet dinner. In the video, the lobster tails that are being used have been shipped to the United States from Northern Australia, but the instructor ensures the viewers that one can buy lobster tails at the local store. For optimal color and flavor, Burhop's suggests preparing the lobster tails with a pat of butter as well as a small pinch of paprika. Using this technique, you ...
In the spirit of foods stuffed with other foods such as Turducken and macaroni and cheese stuffed meat loaf, comes this seafood inside seafood dish. This video tutorial shows how to make King Crab stuffed lobster tails. This gourmet meal is surprisingly easy to pull off, provided you’re working with some decent crustaceans.
Style your hair into a high pony tail with Seventeen Magazine. Apply a conditioning curl cream when it is wet and let you hair air dry after styling your pony tail. Back comb the top of your pony tail for volume and fullness.
Ever wonder how to do the long tail cast on for knitting? Well, wonder no more with this knitting demonstration video! Begin by measuring out a length of yarn for the tail. (Search video "Estimate the length of tail when knitting" on WonderHowTo)
Become the master of Heads and Tails. With this secret technique you can predict and even produce any outcome you like. This is the secret that will let you win heads or tails any time.
In this video, we learn how to install chase tail lights on a Mustang. First, you need to remove the rear trunk panel and trim piece. Next, prepare your tail light kit by following the directions that are given to you with the package. Next, cut the tail light wire. Now, put on your turn signal and take note of which light it still blinking, then mark it with electrical tape. Now, swap that light into the in board position and run the new wires by rewiring the new lights into the tail light. ...
Diva Dan provides you with a simple tutorial on how to roast pig tails. Remember, because the meat of the pig tail can turn very tough, you must cook them slowly. Begin by making the sauce you will let the pig tails simmer in for about two hours. In a bowl, mix in corn syrup (at least 3/4 cup to a cup), catchup (1/4 to 1/3 of a cup), Worchestershire sauce (1/4 to 1/3 of a cup), 2 teaspoons ginger, and 1 tablespoon dry mustard. To make it hot, you can add a little hot sauce. For extra flavor, ...
If you’re not quite sure how to prepare your lobster tails Andy from the Lobster Gram test kitchen will show you how prepare an exceptional tail by boiling for half the time and then grilling the rest. You can use an outdoor or indoor grill for this method.
In this video tutorial, viewers learn how to perform an Ollie, kick flip and shuv-it skateboarding tricks. For the Ollie, begin with the back foot on the tip of the tail and the front foot on the middle of the board. Bend your knees slightly and extend your back as you raise up. Pop the tail of the board and roll the front foot on the nose of the board to land it. For the kick flip, start with an Ollie position and bend the knees. Pop the tail and roll your front foot to the nose. Flick with ...
If you're making tail that needs a costume, be that dinosaur, animal, or anime character, you've come to the right place. Get your K'nex box out, because this video is going to teach you how to make an awesome mechanical tail out of the iconic blocks that will make your Halloween or cosplay costume that much more awesome.
The long-tail cast on is one of the most common methods for casting on stitches. It is stable, neat and easy — once you get the hang of it. This knitter's guide walks you through the entire process. For detailed, step-by-step instructions, and to get started using the long-tail casting method yourself, watch this free video knitting lesson.
Frank Sawyer, river keeper on Englands' Wiltshire Avon, designed an elegantly simple nymph that sinks quickly and imitates various Baetis mayfly species. Sawyer's nymph had only two ingredients: pheasant tail fibers and copper wire. The wire was used as an underbody, to attach the pheasant tail fibers to the hook, and also as a rib over the abdomen.
Snowboarding: Hit the Slopes With Style There was a time when simply riding a snowboard made you the extreme guy on the slopes. But now, with more people strapping on a board instead of skis, the stakes have been raised. Fortunately, we've lined up this video tutorial to keep you on the cutting edge. See how to tailslide a rail on a snowboard.
In this video, we learn how to connect flexi-tails properly. First, take your flexi-tails and grab one with a female end that will screw onto the end of a male. After this, use an isolating valve to fit the compression onto the valves and then tighten it up. Screw the flexible tail onto the end of this. Be careful buying this off Ebay, because a lot of fittings will not screw onto a compression knot. It is very simple to make this, you just have to connect the two tails and make sure they are...
In this video, host Kim, from Cooking with Kim, demonstrates how to steam lobster tails and butter using the EZ Steam Grill. The EZ Steam Grill is a rack which sits on the edges of a pot suspended above boiling water. This quick and easy seafood recipe can be made in just minutes. Kim begins by placing the lobster tails on the EZ Steam Grill. In the center of the grill there is a spot for a small container which she fills with butter, to be melted while the lobster tails cook. She squeezes le...
In this video tutorial, viewers learn how to make beer steamed lobster tails. For a meal viewers will need: bread potatoes, bread, beer and lobster tail. Steam up the beer and boil the lobster tail until it has a red colored shell. Once finished, serve the lobster tail with potato bread on each plate. The bread will be in the middle. The beer will be the beverage. Users may choose to add other treats or recipes to this meal. This is a typical dinner meal. This video will benefit those viewers...
The pony tail is the quintessential up do. In this video, Jeanne San Diego shows her viewers how to make a messy pony tail. After taking your hair in a normal pony tail and tying it up, you then scrunch up your hair and tie a second hair band, creating a messy bun. Then, using a rat tail comb, you should use the end of it and place it under your hair, creating more volume. This technique is perfect for people who would like to have a classy yet simple up do.
A cow's tail might be in the way of a variety of veterinary procedures or other practical functions. In order to get the tail out of the way, the cow's tail may be tied. Learn how to tie a cow's tail for surgical or any purpose without hurting the cow or damaging the bones by watching this video veterinary tutorial.
in this video Evan Burse teaches us an easy way to draw Toothless from the 3D cartoon how to train your dragon.
So you have finished your crochet or knitting project, but now there are a few tails of yarn hanging loose. What to do with them? This video shows you how to sew in those tails and keep your project from unraveling.
After you finally finish crocheting your piece, what are you supposed to do with that tail? This how-to video demonstrates a trick for hiding the end within the stitches of your project. Watch this video crocheting tutorial and learn how to hide short yarn tails.
Watch this instructional crochet video to hide crocheted yarn tails. Use the same type of yarn you used to crochet your patterned hat. You will also need a tapestry needle to sew in the hanging yarn tails in the inside of the hat. You can also use this method to sew up the top of the hat and tie together any mistakes you may have made while crocheting your winter hat.
In this video, Dan the Lobster Man instructs on how to make "Campfire Lobster Tails." Dan starts out with two New Zealand coldwater tails. First, he instructs us to quarter some lemons. To open the tail, take the tail and push down on it - you should hear the shell crack. Take a pair of lobster shears and cut in the middle, breaking the tail a little more, and slice down the middle of the meat. Take the melted butter and pour it on the middle. Squeeze some lemon juice in there as well. Butter...
