Simple instructions for doing a simple bike repair when you are on the road and don't have your tools. This vide shows how to take the tire off your bike rim without using tire levers. Our host demonstrates on a completely flat tire, and shows us how to leverage off the beads of the tire using only brute strength - the leverage of your hands. He then demonstrates how to put the tire back on. The final small section of bead is pushed on using his body strength. This technique is less likely to...
This is something you will need to know how to do if you have a bike in case you get a flat. . First you will make sure all the air is out, and take the tire off the rim and take the tube out.
Trainer Josh helps out by explaining a 3-minute blast to get rid of love handles. First, he explains side-ups. Side-ups are when the body is aligned with the ground on your hips. Then you push upward, and this can also be attempted, while your knees are bended. The next movement involves a dumbbell. This is called a Russian Twist, and you bring the dumbbell from side to side, while sitting on the ground. Next, a side crunch is attempted, while lifting the leg at the same time. Next, he does a...
This video shows you how easy it is to cut and make holes in cement backer board. The first thing you want to have is safety glasses to protect your eyes. To make a punch out hole you have to draw an outline of the hole with a pencil or pen. Use a drill to make several holes inside your outline. A jigsaw will cut out your punch hole. Push the punch hole out. Make a straight cut by marking the front of the board with a pen and a straight edge and use the scoring knife along the straight edge t...
Learn how to do a roundoff whip full combo with tis how-to video. In order to accomplish this combination you must first be comfortable with doing a roundoff, roundoff back tuck, and back layout.
Start with a nice firm pomegranate. Take the pomegranate in your hands and start squeezing it by pressing with your thumbs one of the other pushing into the pomegranate. Squeeze all around the whole surface of the pomegranate. As you press in using your thumbs overlapping each other you will hear the pomegranate seeds popping inside the fruit. Take the softened pomegranate and bite a hole into the side. As you bite the hole make sure you suck the juice as it begins to come out. Once you have ...
First, cut a plastic bottle down the middle the long way. Next, put a little candle in one of the halves.
To make a bumped ponytail start with your hair down. Put your hair up like you are going to put it half up and spray the back with hair spray and pat dry. Next, take a smaller section of the top and spray that two while patting until dry. Next, separate your bangs from the rest of your hair and gently start to pull your hair back into a ponytail trying to make it look as natural as possible. Secure with a rubber band. Spray your bump with hair spray. Next tighten the bottom of your ponytail a...
Amira Nagi of Samadhi Tribal Fusion Belly Dance teaching the hip slide. Belly dance is originally a form of traditional Arab dance. Most of the techniques of belly dance demonstrate circular motions in the core area of the body (the belly, the hips). Belly dancing is a fun, sensual dance that also builds & strengthens abdominal muscles. In this belly dancing lesson, learn the hip slide move. Follow along with this belly dance tutorial to master this move. Hips slide right and left on a horizo...
In this Visual Basic tutorial, you'll learn to use conditional statements for the push-button validation of a designated text string. The code used in this example is as follows:
Standing on a skateboard takes skill and balance. Get expert tips and advice on skateboard decks and tricks in this video tutorial. Take action: push off with one foot, keep left foot pointing straight, put both feet on board at a 90 degree angle, and lead with shoulder to maintain balance. Shawn, the instructor in this how-to video from Live Strong, has over twenty years of skateboarding knowledge. He has appeared in Slap, Thrasher and Transworld magazines and his sponsors include Venture Tr...
Check out this dance tutorial video that demonstrates how to do the shimmy in belly dancing. The shimmy is a move fundamental to belly dancing that all dancers must master. Learn to belly dance for fitness or art in this belly dancing video.
The irony about being an athelete or a person who is active on a daily basis is that you tend to be injured a lot more. When doing such strenuous physical activity such as running, squats, or push-ups, it's easy to pull, tear, or even break something.
Massaging the chest is an important part of any massage. Get expert tips and advice on massage and other treatments in this Diet and Health how-to video. Follow these easy massage techniques that will leave any relaxed.
There is nothing better than topping off a cardio workout with a little strength training. In this fitness how-to video SELF Magazine shows you how to utilize weights and strength training to really tone body. Watch and learn how easy it is to do the following moves with a few light weights: high pull, figure eight, swing back, Turkish get up, skater's leap, push presses, teapot tip, high five squat, bent over row, starfish reach, side press and a Russian twist. You will love the results from...
Take a look at this instructional video and learn how to bunny hop with your bicycle onto any obstacle. To perform this trick, you'll want to crack to the gears one or two rotations to gain sufficient speed. Then, shift your weight backwards until your front wheel is in a high position but relatively short so you don't fall off. Then jump; keep in mind that the front of your bike won't be any higher than it has been just yet. Next, lift up your bike with your arms onto the obstacle and spread...
This cinematography tutorial video provides the basics of working with a photographic light meter as well as how to read the meter. A light and flash meter is nothing expensive. All you need is something that will measure the light and your flash. Most light meters are relatively the same. Metering is a relatively simple process. Just key in the ISO, key in the shuttle speed, push the button, and it gives you the f-stop to use on your professional photo camera.
There are dozens of light bulbs on your vehicle, illuminating everything to the road in front to the license plate in the rear, and for all of the modern technologies given us, most automotive bulbs are essentially the same as on out grandfather's car. So, it's no wonder why burnt out auto light bulbs are the number one cause of lighting failure.
Make sure you have a large Dutch oven with a tight fitting to make these. They need lots of room to braise. As you’ll see in the clip, I was really pushing it with the size pot I used. Of course you can vary this recipe many ways, by using different types and combinations of ground meats. Her original recipe just used all beef, but I added part veal to mine. Enjoy! Ingredients needed are green cabbage, ground chuck, ground veal, raw white long grain rice, butter, Italian parsley, onion, garli...
This is basically how to make a lock pick for a combination lock. Don't go using this to steal things from peoples lockers. These are the steps below...
There are some very powerful tools in CINEMA 4D that you can use very quickly to create some 3D graphic elements. Once you start practicing you'll find it may be easier to create your own reference than to find the "just right" one on the web. So, if you're in need of some barbed wire, for reference or otherwise, check this tutorial out. Of course, it takes quite a bit longer to actually SHOW you how to create the barbed wire (creating the barb, wrapping it around the wire, using MOGRAPH in o...
If you have a beautiful Annual flower bed or a formal bed with lawn on one side you'll want a clean edge between the two. It not only looks nice but keeps weeds from encroaching into the bed helping reduce maintenance. There are several ways to create a nice edge to your beds. You can use a shovel, digging a line bit by bit but that gets hard on the back. Available materials for edging include, plastic edging and metal strips and wooden edging pieces. The wooden edges can be linked together b...
First of all you have to be very patient while kneading dough. You need a lightly floured surface to press the dough. Use the heel of your hand to knead the roll down and away in a rolling motion. Give the dough a quarter turn then fold it over and then push it down.
This video, by Garden of Imagination, shows you how to make a polymer clay pizza. To begin with, have a small piece of wood to act as a tray for your pizza. Take off-white clay for the crust and warm it up between your hands. Roll it out on your pasta machine on the number one setting. Using a circle cutter, push down on the clay to create a circle. Use an object that is a bit smaller of a circle to create the inside area of the pizza by pushing down. While doing that, blunt the edges of the ...
The phenakistoscope is a predecessor of the flip book, but don’t worry: it’s easier to make than pronounce.
Learn how to do alternate lunges and scissor switches. Presented by Real Jock Gay Fitness Health & Life.
Learn how to do super legs exercise. Presented by Real Jock Gay Fitness Health & Life. Benefits
In order to make a Pandora's Box, you first need glossy paper. The paper should basically be in the shape of a square, length 15 cm one side. Then divide the paper into 5ths. Now make 5 such folds on the paper and be sure that every fold is equidistant. Similarly, turn the paper around and start folding it from the other side too, in the same fashion. By doing this you will realize the folds have resulted in equal, similar sized boxes on the paper, 25 in total.
Garden of Imagination demonstrates how to make a miniature turkey for a thanks giving feast in our doll house. First thing going to be done is to make the turkey. Premal’s flesh tone clay is used to make the turkey, so that it will give the color of the meat. This is nice and hard. The clay is kneaded well and made into three balls. One is made in the shape and size of an egg, which is to be the body of the turkey. The front end is pushed on both sides and the back side is just slightly pushe...
You're standing right in front of us, but your voice sounds like it's coming from over there! Color your friends impressed by learning the fine art of ventriloquism.
If things are getting a bit stuffy at your desk, don’t fret. A cool breeze is just a USB slot away. Watch this video to learn how to make a USB fan.
Learn how to do chest focused Gravitron dips. Presented by Real Jock Gay Fitness Health & Life. Benefits
Learn how to do speed super legs exercises. Presented by Real Jock Gay Fitness Health & Life. Exercise
This MIG Welding Video shows the demonstration of a push welding technique that is use when mig welding. When mig welding you can either push or pull the welding torch. The push technique is the most common. Watch this video tutorial and learn how to weld using the push technique.
Steal too many sweet rolls in The Elder Scrolls V: Skyrim? Or did you *gasp!* kill a lowly beggar? No worry, because today we'll show you how to break out of jail!
In this tutorial, we learn how to make a bear pop-up card. First, draw a big bear face on a 4x6 card. After this, fold the card in half so the face is in half. From here, use scissors to cut along the mouth line up until you reach the nose. After this, bend that flap up and down so it's creased and will flip both ways easily. After this, open the card back up and push the nose of the bear into the top. Then, close the card again and the nose will pop up from the page, enjoy!
In this tutorial, we learn how to make a tight paper airplane. First, fold the paper in half horizontally then open it back up. Then, grab the top of the paper and fold each edge into the middle to create a triangle. After this, open it back up and fold triangles down on each of the sides. Continue to fold in the triangle shape in the middle of the paper until you have a large triangle shape. Fold in half again and then push the edges down so you can hold onto the bottom. From here, you can t...
In this video, we learn how to take apart an Xbox 360 for modification. First, take off the hard drive from the console. After this, get the grids off of the console by prying with your fingers. Then, you need to get the tabs off of the cooling cover to the console. Once you have all the sides off, you will be able to push in the rest of the tabs and remove the top and bottom to the console and enter the inside. You will see the motherboard, power supply, and all the other parts inside. Make ...
In this tutorial, we learn how to construct a mouse trap car. You will need: wood, string, wood glue, duct tape, scissors, markers, a mousetrap, wheels, and a drill to do this. To start, you will lift the mousetrap up and tape duct tape around it along with a long stick. Then, tape this to a piece of wood. From here, you will glue together two sticks and then put wheels on the top and bottom of it. Next, you will lay the mousetrap on top of this and then push it. Then it will roll away! You c...
In this tutorial, we learn how to build a simple mouse trap car. To do this, you will need: a ruler, two records, a thin metal rod, and a mousetrap. First, you will lay the ruler down to measure out where you are going to place the records. Next, you will hold these into place by using the metal rod in between the two of them. If it's not secure, use washers and glue to keep it in the proper place. Then, attach the mousetrap to the middle of the rod in between the records. This is it! Now you...