This video, brought to you by Lowe's, a leader in the retail "do-it-yourself" industry, hosted by Lowe's home improvement expert Mike Kraft explains, in detail, how to install horizontal window blinds in your home. Once you've measured and obtained your window blinds, you will also need a drill with bits, screwdrivers, tape measure, pencil, and a level. The video also suggests some other tools you may need to complete your project, as well as links to Lowe's website, for complete instructions...
This video demonstrates the installation of laminate flooring. He shows which side of the board is the top, and shows how the tongue and groove enable the boards to snap together. The tools he uses are a tapping block, a metal pull bar, a hammer and a measuring tape. The flooring is installed by laying the boards down and tapping them into place. The video goes on to show two guys installing the floor in a living room in real time. This is a good do-it-yourself project that doesn't take very ...
Let a Lowe's expert show you how to install bi-fold doors. Learn how to install bi-fold doors that you can add to you closets. Get your drill, doors, tape measure and other tools together so you can be ready to complete your project. Measure your closets so you know what kind of door you need to fit your projects. If you need to paint, paint before you add to the door. Mark all your spots and measure before you add your pieces.
In this video hostess Charlotte instructs us, on how to make "Inner Tube" Bracelets, a rock style associated accessory. Employing either Black Plastic, Leather, or even Tape. Creating these alt accessories requires only scissors and a needle and thread of some type of adhesive to attach the clasp or fastener that will allow you to attach it to your wrist. With a few simple Scissor cuts along the material's length to create a design. Charlotte shows us exactly how it is done with helpful tips ...
Looking to spice up your kitchen? Watch as old, boring cabinets are transformed into new ones! Items you'll need are contact paper, acrylic paint, masking tape, scissors, plastic lids, stencils, and drop cloths.
You use a bike rack that extends from floor to ceiling. Pick where you want to put your picture and place the bike rack there. Adjust the bike rack so that it is at the level you want the picture. Then take a clamp light and clamp it to the pole of the bike rack. If the light slips on the pole, you can wrap some duct tape on the pole to create a surface that the light will stay on. Point the light toward where the back of the picture is going to be. If the picture you want to hang does not ha...
This video shows you step by step everthing you need to know as he reveals the "Cheek to Cheek" card trick. Wickedkid1234 walks you through the trick, so you can perform it for your family and friends. You'll also learn proper shuffling, and a few little tricks so you can do just that, trick your audience. As with anything, its all about how much you practice, but here's a quick and easy tutorial on mastering the famous "Cheek to Cheek" card trick.
Give someone his or her own personal ticker tape parade with this easy prank. You Will Need
Get out that junk paper and scrounge up some tape and a pair of scissors, because it's paper gun time. Watch this three-part video to learn how to make a Beretta paper gun. It's not a completely realistic Beretta, but come on... it's a paper gun. You can shoot paper bullets out of it too if you feel the need to.
See how to make your own paper gun. This video tutorial will show you how to make an AK-47 paper gun. There's really not that much that goes into making a paper gun. You just need some paper, tape, and a pair of scissors and you're halfway there. Make an AK!
Turn paper into paper guns! All you pretty much need is paper, scissors, and tape. Watch and learn how to make a NPG-6 paper gun. This realistic, kid-freindly, replica handgun is easy to make. So start folding that paper pistol!
Make your board your own by tailoring it to your skating style. You Will Need
Drilling is always a messy job. Some just drill and leave the dirt behind to clean up later. Some require someone to stand next to them with a vacuum cleaner, sucking up the dust as they drill. But to eradicate the extra manpower, and to clean up your mess as you drill, try something a little simpler... a mere piece of paper.
It's amazing what you can do with a Pringles can! So many things, and if you own a bicycle, that Pringles can attract some serious babes!
This video is on how to paint the hood of the axon racing razorback anti gravity racer and how to do some basic effects. I use the liquid masking method of Bob Dively and show how to use airbrushes such as Iwata in my other how to paint video. You can use this method with any paint from pactra to spaz stix and any color of black, blue, purple, green, yellow, silver, chrome, etc. I personally prefer Pro line (or proline) shells over their durability but there are other shells out there. Just e...
This video is about how to overcome speech anxiety. Anyone can be a calm speaker with these tips. You will need a video camera and time to rehearse. The first step is to tape yourself rehearsing your speech, so that if you feel you look foolish you can fix your mistakes. another step is to stand up a few moments before you take your stage that way your blood pressure can be regulated. Step 3 is to count backwards from 100 by 7 so that your left side of your brain works and turns off the right...
Most friendships come and go, but the truest ones that stay and bloom deserve something special to honor the bond. While going to Claire's with your girlfriend to purchase a "Best Friends 4 Ever" heart necklace - broken in half, of course, so each of you has half - is a nice way of honoring your friendship, you can do something special by making a friendship bracelet yourself.
Save that last slice of pizza! You can reheat it in its own container, using the sun's power. Turn a pizza box into a solar oven.
Whether it's broken or just plain ugly, your old faucet can be replaced with a shiny new one in a flash. Learn how to replace a faucet without calling the handyman or the plumber.
Personalize your drinking glasses by etching names and messages on them. Your guests will be so impressed!
Watch this video tutorial to see how to make extremely simple scales. This scale is useful when you want to weigh small portions of a substance (like a few grams of powder). It is difficult to get real weight using these scales though. To make this homemade scale, you'll need a plastic bottle cap, a plastic bottle or box, a 9v battery, clear sticky tape, glue for the plastic (epoxy or fast-hardeneing), scissors and a screwdriver.
Need to know how to tie a Bowline with a few ways of securing it? This way shows you how to secure it with a seizing so that it won't accidentally come undone. Included is a little variation of the bowline with a built-in seizing. If you don't have electrical tape to secure the bowline feed the bitter end back through the hole. It also makes it so you don't have a tail line dangling if you're towing something.
In this how-to video, Bethany takes us on a garden tour this week with a lunch sack! She shows how to turn this ordinary household item into a dreamy scrapbook. And then she raids the cupboards again using packing tape to create some filmy image transfer embellishments. So grab your lunch and get ready! Watch this video scrapbooking tutorial and learn how to make a garden of my dreams album out of a paper bag.
Somewhere in between prison tats and a professional tattoo gun, comes the tattoo machine in this how-to video. You will need a tape deck motor, a stereo fly wheel, a 12 volt charger with different settings, a bobby pin hair clip, a brace, a wide pen, and a screw. Since most of these parts are scavenged from around the home, this is a cheap tattoo machine that still produces relatively good quality results. Watch this video tutorial and learn how to build a tattoo machine gun.
This medical how-to video demonstrates the simple steps for inserting a nasogastric tube. A nasogastric tube is more commonly known as a NG. Follow along and learn the basic protocol for doing this procedure. To do a NG tube insertion you will need 14-16 French gauge nasogastric tubing, water soluble lubricating jelly, catheter tip syringe, suction drainage system, and hypoalergenic tape. For your patient, you should have ready a cup of water with a straw, emesis basin, and a towel.
Are you doing a graveyard shot and decided it would be cool to throw someone through a tombstone? This video tutorial will show you how to make a breakaway tombstone. It can also be used to make a cool fake graveyard. You will need foam insulation, a tape measure, sand paper, a utility knife, a marker, string, and paint. Watch this video prop-making tutorial and learn how make a breakaway tombstone for your next scary movie.
Backyard FX is back just in time for Halloween with this video tutorial. This how-to video shows you how to replace your an arm with a motorized gatling gun! Make a cool movie or the best Halloween costume in town! All for less then $35 dollars. You will need six cardboard shipping tubes, a sheet of scrap foamcore, a cordless screwdriver, a film canister cap, an L-bracket, plastic tubes, a plastic bucket, a roll of friction tape, a 1" by 3" scrap of wood, a scrap of wooden dowel, and a skateb...
In this video you will see how to transfer a photograph onto a piece of flannel fabric. You will have to treat the flannel with Bubble jet Set 2000 to help the photo stay on the fabric longer. Use an inkjet printer to make sure the ink soaks into the fiber. Tape the treated flannel onto the printed picture and run the paper through the printer again. The printer should print directly onto the fabric without trouble!
This is two part instructional videos demonstrates how to make a stationery box. This box holds standard size cards, 3x3 cards, gift tags, and more. You need to start with a 12" by 12" sqaure of cardstock. Use double stick tape for the key joints. You can decorate your box with store bought cutouts or use recycled paper and ribbons. Good luck!
This eye makeup how-to video is specially for girls with monolids/small creases who feel like they can't wear bright colors; you totally can and these tips will help you out! Follow this step by step guide, and fake a crease on Asian eyes. Some girls resort to surgery, and tape to try to make their eyes look a certain way. Just a little bit of makeup can create the look of a crease, and play up the natural beauty of Asian eyes. Watch this video makeup application tutorial and learn how to app...
In this video tutorial, you'll find instructions for building a standard joist design playground slide, supported by 3-by-4 posts and secured with galvanized fasteners. All fasteners exposed to the outdoors must be weather-resistant, galvanized, zinc-coated brass or stainless steel. Standard homeowner tools are all you'll need to complete your slide—a tape measure, post-hole digger, circular saw, sawhorses and a level. A good drill/driver is a great tool if using decking screws as fasteners. ...
This instructional video shows how to make a cheap contact microphone. These mikes pick up subtle sounds, and are so cheap that if they get smashed in a musical melee, it's no big deal. This video demonstrates the amplification of a dryer, a teapot, and a stockpot with water in it. You will need a buzzer, a jack, an amplifier, and tape. Watch this video tutorial and learn how to build a mike that will electrify and amplify anything. Drone on!
Want a fun alternative for the boring old pink and white French manicure? This tutorial teaches you how to apply this pretty, glittery white French manicure. You will need glittery white nail polish, a base coat, scotch tape, scissors and a clear top coat. This is a gorgeous look for long natural nails as well as acrylic or artificial nails. This technique takes a steady hand and but is pretty easy to master. With this how to video you will be able to create a a white sparkle French manicure.
Need a change from your boring French manicure? Learn how you can paint this glittery leopard print nail art with this tutorial. You will need a base coat (Orly calcium base coat,) normal plain transparent tape or you can use those premade french manicure nail stickers, white nail polish, black nail art polish
Unfortunately, no one seems to have, or willing to share, the science of making a real teleportation chamber. That doesn't mean you can't make a prop one though. Parker put together this video to show us how. You will need foam core poster board, a hot glue gun, duct tape, a pane of glass or plastic, silver spray paint, black paint, and cardboard. Watch this video prop-making tutorial and learn how to build a teleportation chamber.
Take a look at this instructional video and learn how to replace your bumper guard/grommet strips. This should be done for a number of reasons. One reason is if the bumper guard has worn through and you are now hitting graphite when you scrape it on the ground. Another is if the grommets are coming apart and the string has a chance at touching the frame. Or if you wish to add lead tape in a more conspicuous manner, replacing the strips and guards will help.
The pumpkin just turned into a carriage, your glass slippers look fantastic, and the Prince is on his way, but — dammit — you still need to learn how to ballroom dance. You will need a partner, a dance floor, masking tape, and waltz music. This video gives simple advice for dance posture, the basic waltz box step, and simple turns. Learn how to dance the basics of ballroom dancing, like the waltz box step, by watching this video dance instruction tutorial.
Need to use your XBox 360 as a wireless router to tether your other digital devices? While tethering itself is pretty much to the point, what about being able to tether from further distances than ever before? You can actually increase the WiFi range of your XBox 360 by making a few tweaks.
In Bermuda, people celebrate holidays and special occasions by creating and flying colorful kites! Now you can join in the fun and learn how to build this traditional kite.
Check out this video tutorial to see how to construct an alarm system, that's based on the principle of motion detectors, which work by touch. It's very useful to catch unpleasant visitors red-handed. So make sure your chocolate bar never gets snagged again, catch the bandits with a motion detector alarm! Or just keep you kids away from the birthday present closet where peeping is not allowed.
