Teflon Tape Search Results

News: Organize Yo'sef! Part One

It’s that time of year (in the U.S. anyway) when people are focused on getting organized -- or rather wishing they were organized. Being organized is great, it affords physical space, mental space and all but insures higher efficiency. But wishing and doing are two entirely different things. Wondering how to achieve the bliss of knowing where your stuff is? It’s easy... if you start small and don’t waste your valuable time watching TV shows or reading magazine articles on “how to” do it.

How To: Make A High-Lighter Stun-Gun

The Stun-Gun In this article, I'll show you how to make a small, weaponized highlighter. Before I get into how to built this device, let me warn you. This device is harmful! When used, it can cause burns and/or serious muscle spasms. The voltage is potentially deadly! DO NOT attempt to build this device unless you are experienced with safety, electronics, soldering, and understand circuit schematics.

Whoa, Dude, I’m Bleeding: A Simple First Aid Experience

This weekend, I was on a trip to Binghamton. In the midst of unpacking my toiletries at the hotel, I found that my brand new razor blade had lost its cap. How did I find that out? Well, when I pulled my hand out of the bag, I found that my right pointer finger was missing a bit of its tip and dripping blood on everything. Thankfully, Nathan G. H. Shlivovitz was with me and knew what to do, but the experience helped me to realize that everyone needs a little first aid knowledge in life. Here a...

How To: Make a Helmet Cam (DSLR)

I'm in the middle of a project right now that uses POV for every shot. One of these shots involves a person swinging a golf club. A normal steadi-cam doesn't work very well for this, so I thought it might be easier to just build a helmet cam. Here's how I did it:

News: A Way Out of the Overload

A Way Out of the Overload How do we simplify? There's a welter of information, advice, techniques, schools and every imaginable video tape available on the market to answer that question for you. In making a selection from this movable feast you'd want to take into account the background and credentials of the person offering you a way out of the overload. That's assuming you didn't just throw up your hands in exasperation and walk away from the task entirely.

News: Frisky Father

Throw Knoxville in a makeup chair and age him to make him look older, put him in a Catholic priest outfit and send him out on the streets. Have hidden cameras follow him as he goes into porn shops, porn theaters, strip clubs, buys tickets to kids movies, goes to gay bars, reads a Playgirl in public places (bus stops, parks, book stores, coffee shops, etc.) walks around mens rooms and locker rooms, goes to playgrounds, takes pictures and video tapes men at Muscle Beach, etc, etc.

News: !!**THE ROLLERBLADER**!!

Get lots of fake blood, put it in little packets that can be broken easily. Strap someone up with rollerblades and knee pads helmet etc. Put the fake blood pouches on your body, tape them ore something, then go to a area where there's stairs and lots of people and attempt to jump them or roll down them. You fall on purpose and make sure you pop all the fake blood packs (have some in your mouth and helmet). act like your in serious pain and get up all dazed and confused. Quickly stumble or bla...

How To: Change Your Bicycle's Tire, Inspect for Damage, and Detect Hidden Problems

Many things cause a bike tire to deflate. Glass, sharp rocks, tacks, and nails can pierce the tire and puncture the tube within. A tube can be pinched between the rim and tire causing the tube to split when inflated. If a tire has a hole in it, the tube, which is filled with air pressure, will bulge out of the opening and pop. As well, the valve holding the air pressure in the tube can be damaged or faulty.

How To: Use machine shop tools to build prototypes with MIT

This ten-part series on machining skills for prototype development comes straight from MIT & Erik Vaaler. It's one of the most extensive video tutorials available on the web for machining. MIT's artificial intelligence laboratory's primary work is done for their robotics group. And most of their equipment is unavailable to the public because they're machines that MIT have built directly in their machine shop, or items that came into the shop needing repair. But if you can get your hands on so...

How To: Build a Basic Birdhouse

How to Build a Basic BirdhouseMaybe you were outside in your back yard and you noticed that it seemed a little lonely and empty. Our maybe you have young kids that love to experience wild life in their own back yard. Whatever reason you have for searching out this article, you have decided to build your very own basic bird house. I recently built a deck in my back and had alot of scrap 1x6 decking boards left over. Instead of letting all that good material go to waste, I decided to build a co...

How To: Install No-Frills Drip Irrigation

Solving a Dilemma This is a simple how-to for a cost effective drip irrigation system for your garden. My motivation to set up my garden for drip irrigation was pretty simple. In the summer, it gets to 90+ degrees outside, and my 50’ garden hose didn’t reach the far extents where I have the majority of my large trees. I noticed a large amount of the water I applied to the trees just ran off and did absolutely nothing. This was a huge waste of resources.

News: new one

First take a picture of a friends car. Second upload the picture to either ebay or any other place like that. Third drive the car to some were he or she will not find it. Fourth make sure you show the picture to your friend with he or she realising you did it. Fifth as he or she is looking every were like websites and other places get one of your other friends to buy it.Sixth get your friend to drive it somewere were your other friend is so that he or she can see it. Seventh try to make sure ...

News: The death of a jackass (or so we'll think)!!!

Have one of the most beloved characters on jackass(steve-o,jhonny,bam) fake his death for the world to see, have them pretend to rob a bank and have a cop in there at the same time, so when they hold up the bank they get shot and since its a bank there will be cameras so thats how they got it on tape, remember this will all be fake but nobody will know. or you could fake a car crash and it would have the crew in there about to go film but only 1 would die and the rest would b just hurt.or som...

How To: Make a first aid kit

In this series of online videos you'll learn how to pick a first aid kit for your home. Dr. Susan Jewell shows you what medical supplies should always be in your home first aid kit, including bandages, alcohol, hydrogen peroxide, scissors, tape, gauze, cotton balls, ear & eye drops, a thermometer, splint bandages, medicines and more. Whether you're shopping for a new first aid kit, restocking, or building one from scratch, the tips in these videos will help ensure you're prepared for any mino...

News: Dumb suiside

the first thing you do is get a dummy and go on a high bulding and tape a little speeker on the dummy and through him off screaming into the mic so people will think its real it will be so funny and make sure some of the guys are down there so no one down there will get hit.

News: Never Drinking Again, Worst Hangover Wakeup

If you've gotten drunk and had a hangover, you know how bad it can be in the morning. The slightest thing is like tortue. This will make someone never wanna drink again. It gets pretty good, so you gotta read it all. Ok, get someone to drink very heavy that doesnt drink that often. We can do this the night you fly us out to L.A.. Say its to celebrate us winning.Set up a bunch of alarm clocks in their room(loud noises suck)Aim a bright light right in their eyes and when they wake up turn it on...

Modular Origami: How to Make a Truncated Icosahedron, Pentakis Dodecahedron & More

Last post, the Sonobe unit was introduced as a way to use multiple copies of a simply folded piece of paper to make geometric objects. In this post, we are going to explore that concept further by making two more geometric models. The first is the truncated icosahedron, which is a common stitching pattern for a soccer ball. The second was supposed to be the pentakis dodecahedron, but through systematic errors last night, I actually built a different model based off of the rhombic triacontahed...

News: Empty bathroom prank

Ok, here's the deal.. you take a video camera and just record about 5 minutes of a view similar to the pic (like where you would place a surveillance camera in a room). This bathroom has to be at a location where everybody will be gathered around watching TV etc... Sooo, when someone goes to the restroom, you playback the video you recorded earlier (hiding all playback equipment, obviously), and after the person is in the bathroom, and the tape is rolling, have everyone in the room start laug...

News: Chelsea, Chelsea, Gang-Bang

Working in cahoots with the producers of E! channel's 'Chelsea Lately'; the entire Jackass gang & myself secretly come to a taping of Chelsea Handler's show. Whiles she is doing the show with her round table guests, the producers kick in the 'Party Boy' song over the sound system & we all suddenly run onstage live NUDE and we surround her and start doing a Rockette-style line dance or whatever musical moves we choose. Mayhem ensues. After several moments of shear debauchery, at the conclusion...

News: The Trayvon Deception

If you've been reading, watching or listening to the news, you sure know about the Trayvon Martin case. If you visit this site often, you may also have noticed that I've not put up any news on this case. I have my reasons. And this post will describe why.