In this video, we learn how to apply stripes and add lines to RV cars. You can do curved lines or straight lines, depending on the look you want. For straight lines, you will take tape and mark from the hood to where you want the tape to end. Use different sizes to create the look you want to achieve. To get the lines straight, place the tape on a straight surface as a guide with the clear top that goes over the vehicle. Once you do this, you can paint around this to form opposite colors. The...
By now you've probably heard of the duct tape crafting trend. If nothing else, the sour economy has inspired an upsurge of popularity in DIY stuff, including using duct tape to make everything from prom dresses to wallets.
Hold your moolah in style using this duct tape wallet. Leave your friends with their Dior clutches and fancy business wallets - this duct tape wallet is SO much cooler! Featuring a woven pattern, you can weave two duct tapes in whatever colors suit your fancy.
Whatever happened to the mix tape? A few years back, there wasn't a better and more meaningful gift to give someone than a mix tape full of jams specially tailored to his/her tastes. But with MP3s and internet streaming being the most popular forms of music listening these days, we suppose it's no surprise the mix tape has died out like the dinosaurs.
How can duct tape be magical? When it you turn it into a magical duct tape wallet. The "magical" part of the wallet is that it can be flipped around to reveal a secret compartment.
In order to make and use a stencil, you will need the following: pencil, blue painter's tape, Dura Lar film, Self-healing mat, spray adhesive, old canvas board, airbrush, compressed air, airbrush paint, utility knife, paper, eraser, and an idea for a stencil.
In order to make a Shaker card, you will need the following: a 2" square punch, scissors, card stock, clear plastic, paper, glitter, beads, decorative cutouts, and 2 sided tape.
In this video tutorial, viewers learn how to build a green screen. The materials required for this project are: two 10 ft long PVC pipes, measuring tape, saw, duct tape and pipe elbows and couplings. Begin by marking the two PVC pipes with 6 ft on one side and 4ft on the other. Then cut the PVC pipes in half. Now connect the frame together with the pipe elbows and couplings. Build support to the fame by adding some duct tape. Finish by attaching the green cloth on the frame and tape it at the...
In this how to video, you will learn how to build your very own rain gauge. You will need tape, scissors, rain gauge ruler, and a jar. First, go to the website shown and print and cut out the ruler on the screen. Next, cut the tape strips. You will need them to be about 5 inches in length. Next, attach the rain gauge ruler to the jar. You will do this by placing the ruler on the tape and place the ruler on the jar. Make sure the ruler is aligned with the bottom edge of the jar. Take the secon...
This Diet and Health video tutorial will demonstrate to you how to do an ankle tape job. Take two pads and put them on top and back of the ankle with the toe facing up. Then take the tape and pull it tight. Start about two to three fingers below the calf. Wrap the tape nice and tight around the leg going round and round all the way down to the ankle. Then dive down under the foot and come around under the back of the heel and cut it off. Now you put the first anchor right around the foot. The...
Use tough skin spray adhesive, under wrap or pre-wrap, athletic tape to wrap an ankle. Position ankle in 90 degrees of dorsal flexion. Spray the adhesive to insure tight taping. Heel and lace pads are placed over tendons. Pre-wrap is applied, the goal here is to apply anchors so adhesive from tough skin will adhere to tape. Three layers are applied working towards the calf. Apply heel lock tape from the calf towards the heel, applying tension as you cross the bend in the ankle. The correct lo...
In this video tutorial, viewers learn how to add hemp twine to accent a scrapbook photo. Users will only need a line of twine and tape. Put the twine on one side of the picture and tape the back to hold it. Now wrap the twine in a diagonal pattern (right and left). Then wrap it down the middle and tape the back again to hold it. Trim off the extra twine and tape all the strings of twine at the back, so that it won't move. This video will benefit those viewers who want to add an embellishment ...
Expert Real Estate Tips and Andy Sjostrom with The Good Handyman demonstrate how to prep for painting. A good handyman will handle your items with care. Be sure to remove light fixtures. Before you begin to tape off an area, take a damp rag and clean the areas that will be taped so the tape will adhere to them. Use latex gloves to keep yourself clean during the painting process. Then, tape off the area needing painting and put down a drop cloth. If you get your paint from a big box store, mak...
How to make decorative roses out of baby socks. All you need is a baby sock and some floral wire and green floral tape. Watch the video to learn how to wrap the sock to look like a rosebud around a wire stem, and then tape the base of the sock well with the floral tape. Continue to wrap the tape all the way down the wire so it looks like a nice green stem. Makes a great gift for expectant mothers as it's not only cute but they can also unwrap them and use the socks for their new baby boy or g...
Making an AK-47 gun out of paper is quite easy as shown in this video. You will need: scissors, tape and pieces of paper. ; Make four tubes by rolling each piece of paper and taping them beside each other. ; Take another piece of paper, roll it and tape it including the end sides. ; Attach this tube in the second tube of the four-piece tube you previously made. Tape them very well. You are now done with the shooting tube. ; Take another piece of paper, roll it and tape it. ; Attach this tube ...
This video tutorial shows you how to make a duct tape wallet in under 10 minutes. While wallets are normally made for carrying money, no one wants to spend money on them. As you follow step by step it will show you how to create a wallet out of duct tape. Following the steps in this video will show you a way to make a wallet strictly out of duct tape. When a country is in a recession this is just another way to help you save some money.
In this how-to video, you will learn how to make a Jordan almond flower. You will need Almond holders, rose leaves, stamens for the center, a favor card, Jordan Almonds, floral tape, and ribbon. Take five Almond holders and place the Almonds in the center. Fold the Almond holders in half. Take five stamens and fold them in half to make a flower center of ten. Take floral tape and wrap it around the bottom. Attach the group of stamens and attach it an Almond holder. Secure this combination wit...
In this how-to video, you will learn how to make a Jordan almond flower. You will need Almond holders, rose leaves, stamens for the center, a favor card, Jordan Almonds, floral tape, and ribbon. Take five Almond holders and place the Almonds in the center. Fold the Almond holders in half. Take five stamens and fold them in half to make a flower center of ten. Take floral tape and wrap it around the bottom. Attach the group of stamens and attach it an Almond holder. Secure this combination wit...
Headline: Make an astrojax Description: Here you can make an astrojax which is a cross between juggling and a yo-yo.
Taping fingers is good for minor injuries of the middle joint because taping supports the injured area without preventing motion. Learn how to tape fingers and stay fit in this sports medicine video. Take action: injuring the middle joints of fingers is common, try to support above and below joint but allow flexibility in the joint, check for deformities, while ice and anti-inflammatories can help. Mike Vera, the instructor in this how-to video from Live Strong, is an athletic trainer the Rog...
Watch this short tutorial on how to make a realistic bullet hit to simulate an actor getting shot by a gun. Materials needed include a pressure sprayer, clear tubing that will fit on to the hose of the pressure sprayer, a small Translucent PVC elbow, fake blood, duct tape, a funnel, a shirt you don't mind damaging.
What's the cheapest wallet you can afford? With today's prices, you're better of with a DIY wallet, and the best material for the job— duct tape. This two-part video will show you the short steps to making a duct tape wallet that has everything— bill pocket, card slots and change purse. This is a fully functional duct tape wallet! Give it a try.
Grip-taping your casterboard is very important for traction, and if you don't know how, this video will help you, with three different methods of putting grip tape on the deck of your casterboard. Ryan Wilson and Axis shows you the tricks to gripping your board.
Flip flops are the ultimate summer shoe, they can take you from the beach to the bar without a problem! Everyone has a pair, so why not make yours unique? In this tutorial, learn how to make the coolest pair of flippers on the boardwalk, completely out of duct tape.
A tutorial on how to make a paper slingshot gun that shoots. Things you'll need: Bond Paper, Elastic, Scissor and Duct tape. Roll the bond paper half-wise. Secure with duct tape. Get another bond paper and fold it in half. Cut. Roll the cut bond papers length-wise and secure with duct tape. Form a "V" shape using the rolled cut bond papers. Attach to the first rolled bond paper to make a "Y" form. Secure with tape. Attach a rubber band on both ends. secure with tape. Follow these steps and Yo...
This is a slight of hand magic trick. You show four cards. The top card is a Queen of Spades. Place the Queen of Spades on the table. The bottom card is a Queen of Hearts. Shake the cards. The four cards are now Aces. To do this trick, you need a gimmick card. Use double stick tape to attach the Ace and Queen together. Then, you have another Queen and three Aces. Put double stick tape on back of Queen. Now, you have Ace, Ace, Queen, Ace. Put double stick tape in the middle of Queen of Hearts....
Russell Weekend Adventurer explains how he carries duct tape on the trail while hiking to fix little unwanted problems like tears and such. This how-to video is good whether you plan to live in the wilderness, camp overnight, or take day trips. Why put duct tape on your water bottle while hiking? Duct tape fixes a lot of things. Use about three feet of duct tape so you can pull it off and apply it to blisters or your tent.
With ultra competitive games like Fortnite Battle Royale and PUBG taking the mobile world by storm, gamers are looking for ways to get a leg up on the competition. One of the biggest advantages you can give yourself is the ability to aim and shoot while on the move, but that's not exactly easy with a touchscreen.
Striping tapes are very popular these days , among nail enthusiasts. One of the main reasons is that not only is it super easy to use, but you can literally create hundreds of styles by using them right !
One thing that's always important to have in your home office is a bulletin board, because they let you quickly display papers that you need to see every day, such as schedules, notes and memos.
If your RC car tires are lacking some of the rigidity you'd like them to have, check out this video to learn how to strap your tires. You'll need some duct tape and a flat surface, ad then you'll be back at the track ready to eat up the competition with better traction and stability.
This is a lens you can make yourself easily. You will need a drill, a needle, a body cap, tape, aluminum foil, a ruler or measuring tape and a pencil or piece of chalk to mark where the hole should go.
In this tutorial, we learn how to build a wave machine out of household items. You will need: 20 straws, 40 paper clips, 2 pieces of tape, and 1 washer to make this. First, you will need to pull out a long string of tape and lay it down with the sticky side up. After this, you will need to stick the straws on top of the tape in a row all going next to each other. Do this from the top to the bottom until all of the straws are stuck on. Then, stick the washer to the top and you are finished wit...
In this video, we learn how to paint your favorite sports team logo on a racing shell. First, you will take your shell and trace out the logo on it with a Sharpie marker of your choice. Use tape to cover the areas that you don't want marked, so the lines come out cleaner and straighter. After you have done this, paint the logo onto the racing shell with small brushes and your choice of paints. Leave the tape in place until all of the paint has dried. Then, remove the tape from the shell and y...
In this video, we learn how to make an ornate paper rose. First, grab your paper and some wire. Start by wrapping six of the wires with floral tape all the way around. Next, use your scissors and cut out 8 teardrop shapes from the paper. Then, cut 16 more in different sizes. From here, wrap the petals around the stem using the floral tape. Start in the very middle of the flower and then add on petals until you have created the entire rose. To finish this, you will make the leaf. Cut out the l...
In this video, we learn how to make a Necronomicon prop from the "Evil Dead" series. First, gather all of your materials together so you can make this prop. After this, cut up piece of cardboard into the desired shape, then tape them and make sure it's able to open and close. Next, you will use tape to make it look like creases in the skin and create the face by rolling it together. Use masking tape to connect these and make it look like it's all part of the same skin. Next, mix red, yellow, ...
In this video we learn how to wrap handlebars. First, open up the tape and remove the adhesive. Place the tape on the bar and then tuck in one half as you work your way up the bar. The adhesive should be on the bars and there should be tension on them so they lay flat. Once you finish wrapping this, make sure they are tight and secure. Check your work to make sure you didn't leave any gaps and the curve is smooth. Don't pull too hard if you are working with cork tape, this will cause damage t...
In order to make an accordion envelope, you will need the following: 6 envelopes, 4 pieces of 6x4 1/8 card stock, double sided tape, chalk, a square punch, and glue.
In this clip, learn how to make a very cool duct tape wallet with multiple credit card flaps. This detailed billfold can be made into a bi-fold or tri-fold shape and is sturdy enough to carry an array of cards and cash. So, follow along and start building your very own, totally unique, wallet.
In this video tutorial, viewers learn how to upgrade an old lamp shade into a blossom lamp. The materials required are: 1 1/2 yard of felt, old lamp shade, bias tape, glue gun and scissors. Begin by folding the bias tape in half and iron it down. Then glue the bias tape from the half fold on the top and bottom of the lamp shade. Cut the felt into 3x3" square pieces and then cut them into circles. Fold the felt circle in half and glue it onto the lamp shade. Continue doing this for the rest of...