It's prom season and many young women along with friends and family, will hit up any store they can to find the perfect dress. Sometimes they'll spend well into the thousands just to find a dress that will be different than anything else will be wearing to the dance. Originality is what they are looking for, but why go to the stores? Why not make your own using different material? Maybe even duct tape? Well if you're interested in standing out of the crowd or just making something for fun thi...
Wrapping your bike's handlebars with bar tape might not sound like a complicated enterprise but it's much trickier than you might expect. Fortunately, this video presents a complete overview of the bar-wrapping process and will help you to a achieve a finished, even wrap every time. For more information, including step-by-step instructions, watch this free cyclist's guide.
You know how they always make you cover your books in school? Doesn't using a paper bag kinda stink? They always rip by the middle of the school year and everyone has the same one. So, why not be totally unique and make a heavy duty cover out of duct tape?
Save some money on your energy bills by making an attic stairway box. For less than twenty five dollars, all you need is caulk, UL181 masking tape, insulated sheathing, and rubber foam sticky tape. Measure the width, the length, and the depth of the attic stairway opening. Lay the insulated sheathing down on the floor and get a straight edge. Take those measurements and create a rectangular box. Mark out six pieces to create the parts of the box – two large top pieces, and four shorter side p...
This is a fun and easy craft demonstration that shows how to make a paper jack-o-lantern with orange, green and yellow construction paper, scissors, tape, a pencil, a black Sharpie and an X-acto knife. Begin by drawing a jack-o-lantern on the orange paper. Use the knife to cut out the eyes, nose and mouth. Cut a top out of green paper and attach it with tape on the back. Cut out a piece of yellow paper and tape it to the back, to show through the holes on the front of the jack-o-lantern. Add ...
A simple and creative way to make your own wallet. A few folds and snips of the scissors and you've created your own pocket wallet. You can even use different color of the carton to achieve a different and unique kind. It is extremely simple, the only things you need are your hands, scissors, tape and stapler. Open the carton, flatten it out, cut, tape the cut sides, staple and apply adhesive strips. You can apply whatever color of tape you want, this can make the wallet even more personalize...
No one likes getting their feet stuck in the mud. With this video, learn how to make your own pair of rain boots out of things you already have around the house. You will be dry while looking stylish and unique!
Kick up your look by adding dresses you make yourself to your wardrobe. It's simple to create a patter and sew a dress that will fit your exact measurements. You'll be amazed at the differene of having a drees you made yourself makes.
In this Diet & Health video tutorial you will learn how to easily tape an ankle to prevent an injury. Place the injured foot on a soft furniture with the ankle protruding out. Toes should be pointing upward. Place two pads one on top and the other below the ankle. Start wrapping the tape around the leg starting about 3 inches from above the ankle. Cover up to the ankle and then go below the foot and take three turns, then cover the heel and come over the ankle. Now put three anchors on the to...
This wrap is intended to support and stabilize the ankle joint. Supplies needed include a 1 - ½'' – 2'' adhesive tape, pre-wrap, and heel and lace pads. Apply heel and lace pads at high friction areas, including the distal aspect of the Achilles tendon, and the dorsal aspect of the ankle joint. Apply under-wrap to secure them in place. It is critical that the foot remains at a ninety degree angle for this portion of the procedure. Apply an adhesive tape anchor strip at the lower leg, approxim...
The first thing you need to get is a multimeter this will help you test it. There might be a function on the meter that will give you the amount of voltage in that particular area. Then you have to put foil tape on all of the inside of the guitar to test it. You need to get two wires from the meter and then put them both on the foil tape on the guitar. If you don't hear a beep then you add more tape in that area where there is no activity. You can also test this on the ground.
Are you looking a man to get a suit tailored, but don't know what size you are? You probably want to go to your local tailor with at least an idea of what you're talking about. Learn how to measure your own waist circumference in just a few easy steps. First you must acquire a bendable tape measure, which can be found in almost any convenience store. Wrap the tape measure around the fullest part of your body, which is usually somewhere around your belly button. When taking the measurement, be...
Cut a square or rectangle card. Similarly make another one but a square hole in the middle. Cut a square of page protector exactly same size of the card and paste it on the back side of the card with the hole using a glue or tape. Now paste a journaling or note you made to the middle of the card without the hole using glue. Place mounting tape on all four back sides of the card with the page protector. Now remove the outside of the mounting tape on three sides, not four. Place the card with j...
Here is a simple technical to measure hole you dug with a post hole digger. Take measuring tape. Place it with the post hole digger from bottom to the end of the post hole digger. Mark each foot division on the post hole digger with a marker. So now you can measure depth of the hole you dug with post hole digger without the need of a measuring tape. If you want to dig 2 feet deep down the earth and you could not find a measuring tape to measure, but markings on the digger will help you to mea...
This is an awesome mini cross bow that will really shoot. You just need some tape, a rubber band and a pen and you’ll be on your way to making this cool toy. It’s not very difficult and can be done in just a few minutes.
If your replacement faucet is not the right size, pick up a connector and fitting from the hardware store. You will also need wrenches. First turn off the water supply. Then, brace the pipe with a pipe wrench. Use another wrench as a lever and remove the faucet. Take a piece of plumber's tape and wrap the brass connector. Make sure you thread the tape in the same direction that you screw on the connector. Screw the connector on by hand and tighten it with a wrench. Use the other wrench to kee...
To change a tubular bike tire start by stretching the tube. Put your foot on the tire and pull it upward with your hands to stretch it out. Take a clean rim and put Tuflo tire tape onto the rim inching your way all the way around the rim leaving a 2-3 inch gap opposite the valve stem so that you can remove the tube in case of a flat. Pull a small section of the tuflo tape foil loose and leave it sticking out to side of the tire. Put the tire on the rim starting at the valve stem. Once you hav...
Cut out the old caulk with a utility knife. Trim along the sink where the old caulk was located. Scrape out stubborn caulk with a putty knife or a paint scraper.
Want to wear some awesome ear plugs and be the most unique person walk down the street? Then you're going to have to stretch out your ear holes - and we mean REALLY stretch them out. Since ear plugs come in sizes ranging from the super tiny to even 2 inches in diameter, you'll have to stretch your ear to whatever diameter you prefer.
Do you have a piece of stubborn masking tape stuck somewhere and you just can't get it off? Does it stare at you in the face, begging you to have a nervous breakdown? Ron Hazleton is here to save your day. In this video, learn how to remove old unwanted masking or duct tape from walls, wallpapered surfaces, concrete (and more) using a hair dryer to warm & soften te adhesive.
Warts can be embarrassing – as well as contagious. Help minimize the chance you'll spread them to other parts of your body, or other people.
Use your magic skills to perform this hot trick at your next party. You Will Need
Don't jeopardize your memories. Learn how to preserve your old home movies by digitizing your VHS tapes.
Find out how to patch up your radiator hose long enough to drive to the auto parts store or your local mechanic and replace it with a new one.
Don’t toss foods into the freezer willy-nilly and hope for the best! Storing them correctly preserves taste and texture. Learn how to freeze food properly.
Portraits come in all shapes and sizes, but follow a few basic guidelines and you'll set the scene for a beautiful and professional shot.
Learn how to make a reloading paper gun and paper bullets. You will need:
Make your own book out of recycled material. You can use thick cardboard pieces for each page. Find some strong tape to make an outer binding. Tape each page of the book down with masking tape. You can then reenforce it by glueing down strips of brown paper bag. Decorate your book with other recycled items such as stickers, photographs, and plastic bags.
Want to get a salon quality French manicure at home? This tutorial teaches you how you can get a perfect French manicure with regular clear tape. You will need base coat (Orly - calcium base coat,) tape or you can use those pre-made French manicure stickers, white polish, top coat. The trick to a perfect manicure is to wait for the white polish to DRY before applying top coat to prevent smudging. With this how to video you will be able to paint your nails in a perfect French manicure.
Check out this step by step instructional video to learn how to make a Cosplay Sword from cardboard and wood! Make sure you have all of the following materials to start making your Cosplay sword: spray paint, hard cardboard, wooden dowel, bendable metal wire, silver colored tape, embellishment, super glue, hand saw, paper clay, masking tape, scrap papers, pen knife, and a PVC pipe. Watch this Cosplay video and enhance your role playing with this tutorial!
Take a look at this instructional video and learn how to use the tape measure tool in Google SketchUp. You can use this tool to measure edges and distance, create construction geometry or dashed guidelines, and resize individual groups or the entire model. This tutorial covers all three of these functions in a step by step guide.
Wally from the East Coast Trans-communication Organization explains a little about collecting EVPs. EVPs, or electronic voice phenomena, are supernatural sounds that can't be heard by the human ear, but can be recorded by a tape recorder and then played back to hear any messages from the beyond. Watch this video paranormal tutorial and learn how to document EVP electronic voice phenomena with the help of a tape recorder.
This instructional interior design video demonstrates how to apply vinyl wall letters correctly. Always use a level to place the transfer tape. Use a smoothing tool to press the letters onto the wall and press out any air bubbles. Peel off the transfer tape of the vinyl wall letters at a diagonal angle.
In this how to video, Greg Swanson grabs a razor, wax, Naire and duct tape to see which one takes the hair off of his legs the best. Hair removal for men is getting more and more popular. This tutorial gives you a step by step guide to the best hair removal methods from your legs.
The ATG gun is an essential tool for scrapbooking projects. The adhesive is strong, and it's easy to apply. Loading more adhesive tape into the ATG gun can be complicated. Watch this video tutorial and learn how to load an ATG double-sided tape gun.
This tutorial video will show you how to stretch your earlobes. It covers the basics of taping and using bondage tape to increase the size of your ear.
Use seam binding tape to quickly and easily finish the edge of a sleeve or neck edge or other garment edge. This sewing video tutorial shows you how to press your seam binding tape and easily sew it.
This instructional how to video will show you how to build a traditional Japanese bowed kite that's simple to make and has great soaring ability. Just watch and learn to make a battle kite. For this project you will need: rip-stop nylon, wooden dowels, cloth tape, double stick tape, scissors, string, toothpicks, yard stick, pencil, paper. Have fun creating your kite with an adult helper.
This Japanese kite is a terrific flyer and exciting to make! Watch this instructional how to video to learn how to make a Suruga kite. Have fun creating your kite with an adult helper. For this project you will need: rib-stop nylon, bamboo dowels, cloth tape, double stick tape, scissors, and string.
Before painting any room, you want to ensure that the paint only lands on the wall surfaces you intend to paint. See how to tape room walls and other objects to reduce unwanted splatter.
