Tempered Glass Search Results

How To: Determine the air amount in packing peanuts w/ acetone

How much air is actually inside a packing peanut? There is a simple experiment to conduct to see what is leftover. To begin, pour 200 ml of acetone into a glass container and add approximately 1800 ml of packing peanuts. Stir with a wooden spoon to dissolve. The video's author starts with the 1800 ml and realizes that that isn't enough. He then keeps adding until he has added an entire large bucket to the original 200 ml of acetone. After all are dissolved, all that is left in the glass conta...

How To: Set a table the proper way

This video teaches us the way to properly set a table. You will require a couple of things for this purpose. These things include a table with a table cloth and napkins. These should be kept at one side of the table. Then take salad forks and dinner forks. Arrange these in the center. Take knives and spoons. Arrange these besides the forks on both the sides. Take bread and butter plates and arrange them above the salad and dinner forks. Put glasses above the spoons. Put bread and butter knive...

How To: Prepare a simple morning protein shake

In this video, Steve Kim shows us how to make a simple morning protein shake. You will need a blender, glass, oatmeal and protein powder for this. First, place a cup of water into the blender along with around 5-6 ice cubes, crush this together in the blender. Next, add a scoop of protein powder and a 1/2 cup scoop of oatmeal. Put the lid back on the blender and blend on low for about 30 seconds, slowly pick up the speed on the blender and blend until it's well mixed together. After this, pou...

How To: Use glue-in bails and caps

This video shows the method to use glue-in bails and caps and Morano glass bead to make a simple Christmas tree ornament. Apply adhesive to the post on the glue-in cap. Apply enough adhesive so that the cap makes good contact with the Morano bead and does not ooze out from the sides. Insert the cap into the Morano glass bead and put it upright until adhesive sets on the bead. Put adhesive to the post on the bail. Put it into the bead and leave the adhesive to set. Put the ribbon through the b...

How To: Create a glass text effect in Photoshop CS3/CS4

This Software video tutorial shows how to create a glass text effect in Photoshop CS3/CS4. Download a free trial version of Photoshop CS4 from Adobe. Open Photoshop, go to ‘file’ and click ‘open’. In the next box, give it a name, select width and height at 90 pixels, background contents to ‘transparent’ and click OK. Select the color palette and choose the background color and click OK. Now open ‘paint bucket tool’ and fill in the color. Then go to ‘text tool’, select the font, size and posit...

How To: Make Windows Vista'saero glass borders fat

Customizing Window Vista's glass borders is relatively simple. In order to expand the borders, right click and choose properties, then choose appearance. Scroll down and click on 'open classic appearance properties'. Under Windows Aero, choose advanced settings, and click on desktop and choose border padding. You can then increase the size to your choosing and click 'ok' and 'apply'. After a few short seconds, you will notice that your borders are fatter than they were before! You can also us...

How To: Make a purple chongo drink

A purple chongo drink, better known as a "Jay Tee Splash" consists of 4 main ingredients. If you can afford it, Bombay gin is the best. Otherwise, just a basic Seagram's gin or grocery store gin is ok. Next, Ocean Spray Cran-grape, which is cranberry and grape juice. Last two ingredients are Minute Maid orange juice and of course, ice. Get a basic 8 oz. glass and fill half way with ice. Cover the ice with the gin, let it melt down a few minutes. Then you can fill the rest of the glass with th...

How To: Make a chili and passionfruit martini cocktail

The video opens with a gentleman standing behind a bar who is about to demonstrate how to make a passion fruit and chili martini cocktail. He starts out with a premixed bottle of vodka infused with lemongrass mixture, which he pours into a mixing glass. He then adds some passion fruit puree, a drop of passion fruit syrup, and a dash of lime juice. Next he adds a few chili seeds. He says the amount depends on how spicy you want the drink to be. Then he adds some ice and shakes vigorously. Next...

How To: Make a slutty redhead cocktail

In this video, from Jabu's Pub in Seattle, Washington, we learn how to make a Redheaded Slut, also known as a Slutty Redhead. To make this cocktail you'll need a shaker, a shot glass, Jagermeister, peach schnapps, and cranberry juice. First, fill the shaker with some ice to properly chill your drink. Put about a two count of Jager in, a one count of the peach schnapps, and a one count of cranberry juice. Shake that up, getting it nice and chilled, and then strain it into your glass. And there...

How To: Make the perfect dirty martini

This is video showing you how to prepare a dirty martini drink. For making this drink, you need some 3 oz. vodka, 1/2 oz. of extra dry vermouth, olive brine, green olives. Start first with putting ice in the shaker. Put 3/4th portion of ice to get the liquor very cold fast. Now pour 3 oz. of vodka into the shaker, and put a splash of olive juice. Now start shaking the shaker. About 15 shakes should give a nice cold liquor. Now before serving put little dry vermouth, turn round the glass and t...

How To: Make a pumpkin spice martini

You need to have three kinds of ingredients – Vanilla vodka, pumpkin spice liquor, and Baileys. Find your martini shaker and fill half of it with ice. Add one ounce of vodka, one ounce of pumpkin spice liquor and one ounce of Baileys all in equal parts. You do not need to measure it exactly; you could just pour them into the shaker just approximately in equal parts. Put the cap on your shaker and shake until the outside of the shaker is frosty cold. Then pour the contents of the shaker into a...

How To: Open a glass bottle with your lighter

This video shows us how to open a glass bottle with your lighter. To open a bottle using a lighter: Hold around the top of the bottle using your left hand. The key is that the index finger must be around the top of the bottle. Hold the lighter with your right hand and place the blunt end of the lighter solidly between your lowest knuckle and the edge of the bottle cap. Hold the lighter perpendicular to the bottle. Tuck the lighter so that the edge is under the teeth of the bottle cap. Squeeze...

How To: Make an americano cocktail

The Americano is a gentle introduction to the unusual, bitter taste of Campari. Cocktail shaker with top Crushed ice 2 oz. , Campari 2 oz. ,sweet vermouth Soda water, Orange twist, for garnish Lemon twist, for garnish Fill a cocktail shaker half-full with crushed ice. Add the Campari and sweet vermouth to the cocktail shaker. Replace the top on the cocktail shaker and shake gently for 15 to 20 seconds, making sure you do not bruise the alcohol. Transfer the drink to short cocktail glasses hal...

How To: Place a table setting

Follow these simple steps and learn the fundamentals of setting a perfect table for your next dinner party. This video is an easy guide to setting a formal table. Your forks always go on the left side, the salad fork on the outside, the dinner fork closest to the plate. Remember to always work from the outside to the inside. Your knife goes on the right hand side, with the blade pointing inward towards the plate. if you are serving soup, your spoon goes directly next to your knife. Your desse...

How To: Make a candy cane martini

How to make a perfect Candy Cane Martini. What you will need: Bacardi Rum, Peppermint Schnapps, Grenadine. What to do: Take your shaker and fill it up with ice. Add 2 oz. White rum. Add 1oz. Peppermint Schnapps. Add 1/4oz Grenadine to shaker. Shake to mix the ingredients. To get a candy cane look, mix white and red granulated sugar. Put Peppermint Schnapps on a saucer and dip the glass in it, then dip the glass in the sugar mixture. Now add the martini. Just follow these instructions and you ...

How To: Make a delicious chocolate martini

Toy-tini presents their own favorite way to create a chocolate martini, and this simple recipe will be sure to please you. First, you want to fill a 3 piece shaker about 3/4 full with ice, and begin adding the ingredients. Add 1oz of vodka, 1oz creme de cocoa (brown), 1oz Bailey's Irish cream, 1 tablespoon chocolate, and start shaking (15 shakes) to mix all the ingredients. Lastly, take a martini glass and dip only the top rim in the creme de cocoa and then put into the cocoa powder to create...

How To: Make a sour patch apple martini

This video instructs the viewer on how to make a Sour Patch Apple Martini with candy garnish. To mix this drink you will need ice, vodka, apple schnapps, apple juice, and Sour Patch Kids candies. To start off, put some ice in a steel beverage shaker. You will then add one part vodka, one part apple schnapps, and two parts apple juice. Put the cap on, and shake vigorously. The video suggests, "Put ya booty into it!" Place sour patch kids (about four or five) in the bottom of your martini glass...

How To: Make a chili & passionfruit martini cocktail

Enzo Mitro shows how to make a chili and passion fruit martini cocktail. This is done by using vodka infused with lemon grass. Passion fruit puree is then added to that in a mixing glass. A small amount of passion fruit syrup is then added to that. A dash of lemon juice is then added. Chili seeds are the next ingredient. The amount of Chili seeds depends on how spicy you want the drink. After shaking all of the ingredients together, the drink is double strained into the martini glass because ...

How To: Make rock candy

You can learn how to make rock candy. The process is very simple. You only need water and sugar. You put the water to boil and then add a cup of sugar. You mix it up and then put it in the sink and poor it into a glass. Then a screw is inserted into the glass to get moisture into the solution. Take it out, leave it for 3 days, then after 3 days sink it again in the solution and then leave it to dry for 1 week.

How To: Create a mosaic jewelry box

This video demonstrates making a mosaic jewelry box. A plain jewelry box is decorated using different shaped pieces of glass. First, round flat glass pieces are glued in the center of the top and sides. Then a ring of glue is put around the circle and rectangular pieces are glued around that. Square tiles are used around the top edge, and odd shaped pieces are used to fill in the rest of the surface area of the box. After it has dried for two hours, a glaze is applied to the entire box. This ...

How To: Make fake break bottles for a film effect

Backyard FX show host Eric has an awesome new tutorial for all you aspiring film makers. He is going to teach you how to make your own fake glass bottles out of household products such as sugar, corn syrup and cream of tartar. This is generally for scenes where a glass bottle needs to be broken over an actor's head. This method is incredibly safe and won't cost very much to make either. Be sure to follow his tutorial closely because you may be forced to have to start over again if you skip a ...

How To: Make a storm inside a test tube

This science experiment will show you how to make a storm inside a test tube. This video tutorial will demonstrate the process of making the miniature thunderstorm inside a test tube with just a few common chemicals. All you need for your very own thunder storm is a glass test tube with holder, sulfuric acid, ethyl alcohol (ethanol), potassium permanganate, glass dropper, measuring spoon, and please wear safety goggles. Sparks and pops occur completely random, just like in a real thunderstorm!

How To: Remove old car window tint

If you've decided that you want to scrape the tint off of your vehicle's windows, you're going to want to watch this video tutorial. In order to strip the tin from the windows, you'll need a single-edged razor, a cleaning rag and an all-purpose spray cleaner. Scrape at the corner of the tint film with the razor and peel it off. Spray the cleaner on the glass , then put back the film onto your automobile's window. Wait about twenty minutes and pull it of again. Now, spray off more cleaner and ...

How To: Perform the egg trick

Check out this magic trick tutorial video to learn how to get a whole egg in a glass bottle using only 3 matches. This is a really quick and easy trick to perform. Just follow these simple instructions: Grab a glass bottle, 3 matches, and a peeled hardboiled egg. Drop 3 lit matches into the bottle. Place the egg on the jar, small end down. Watch as the egg slowly slips into the bottle without being able to get back out! Impress your friends with the egg trick!

How To: Mix a dirty vodka martini

Theo explains how to make martinis that you’ll like. He starts with vodka, preferring Grey Goose or Smirnoff. He explains that basic vermouth is fine in a martini; expensive vermouths don’t do much for the flavor. He uses a standard martini glass for serving and suggests chilling them in the freezer, and the stainless steel part of a Boston shaker and strainer for mixing the drink. He suggests having olives on hand for a dirty martini, and picks to hold the olive garnish. He starts by fil...

How To: Replace the battery on the Apple iPhone 3G

Repairs Universe demonstrates how to replace the battery on an Apple 3G iPhone. First, remove the SIM card and remove the two screws from the bottom of the phone. Next, use a safe pry tool and run it along the phone between the bevel and the glass to pop out the screen. Then, slowly lift the glass. It will still be connected to the phone body with three ribbon cables. Popup the connectors on the cables one and two. Pop out the three connector from its jaw connector. Remove the digitizer glass...

How To: Build a light table for silkscreening and photography

Josh Copp and Madeline Donahue show us how to build a light table from pine wood and plywood utilizing two fluorescent light fixtures as the light source inside the box. The frame of the box is fashioned out of two 1X8 planks cut into four pieces so that two sides are 30 inches and two sides are 22 3/8 inches. The base of the box is made of plywood or OSB and is 30X22 3/8. Once the pieces are cut and assembled using a pocket hole jig and wood screws, the inside of the box is painted with whit...

How To: Make corn dogs from scratch at home

Who doesn't love a corndog? They remind us of childhood and going to the county fair or beach. Well, luckily with this video's help, you won't have to leave your house for one of these summertime treats. Check it out and make your own, step by step.

How To: Set a place setting for a casual dinner

Lifestyle expert Hal Owen teaches us the correct way to set a table place setting. 1. Place the "charger" plate in the middle of the place setting. This is the plate on which you will place all of the other plates. 2. Place your "dinner plate" in the middle of the "charger". 3. Place your "soup plate" in the middle of the "dinner plate". 4. Place your fork on the left of the plate and your dinner knife and spoon on the right, with the soup spoon on the outside. 5. Place your dessert fork and ...

How To: Shoot zoo or wild life photography

NikonDifferent of Nikon shows you how to shoot zoo/ wild life photography (particularly with a Nikon d40 as an example with a zoom lens with Vibration Reduction), given the fact that animal enclosures are usually set up to give the animals space. You'll want to limit your visit to two or three types of animals (good photographs require time or patience). Animals playing/ fighting make good pictures, but you need to set a fast shutter speed (if you have low light, crank up your ISO). Try to an...

How To: Install a glass vessel sink or countertop

This video tutorial shows you how to install a glass vessel sink or countertop. First you need to make sure that the glass vessel sink or countertop has all of the pieces needed and that none of the pieces are scratched or broken. You then need to place the mouthing ring on the countertop where the sink is going to go. Make sure that the rubber side is facing down. Then carefully set the sink on the mouthing ring. You must then take off the tail piece of the pop up drain. Take off the ridge a...