Tension Search Results

How To: Play a guitar cadence

In this video tutorial, viewers learn how to play a guitar cadence. A cadence is the tension that is created between 2 chords, typically at the end of a phrase. There are 2 types of cadences, perfect cadence and playable cadence. The perfect cadence goes from the 5 chord, to the 1 chord. It has a tremendous amount of tension between the chords. The playable cadence has a soft strum and less tension between the chords. This video will benefit those viewers who enjoy playing the guitar, and wou...

How To: Increase your bench press with "white knuckles"

The instructor talks about a technique called white knuckles. White knuckles means creating tension with your hands. You'll squeeze the bar as hard as you can to create tension, and you'll see white knuckles. To learn how to do this take a jump stretch band and wrap it around your wrists. Now you'll have to spread your hands out and hold the bar as hard as you can so that your hands don't slip on the bar. This will also teach you to pull your hands apart to engage the last. Lie on the bench w...

How To: Pick a door lock

Arthur Cavallin demonstrates how to pick a door lock. To pick a lock, you will need to push up the pins and align them so that the mechanism will open. You will need a tension wrench which you can make with an alan key. You will also need a lock pick which you can make out of a hacksaw blade. Use the tension wrench to apply pressure to the front pin. Then, use the lock pick to push up the back pins. You can also use a quick raking technique to push the pins in. Insert the tension wrench into ...

How To: Adjust the neck on an electric guitar

Step by step tutorial video on adjusting the neck of your guitar. First you need to remove the truss rod cover to gain access to the truss rod. Make sure you have the correct Allen key when adjusting your truss rod. If your guitar came with it's own Allen key make sure you use that one. Put a capo on the first fret. To increase the tension on the truss rod turn the Allen key to the right. To decrease the tension turn it to the left. Always check the gap between the frets and the strings.

How To: Give an excellent face massage

Georgia Koons demonstrates how to give a relaxing and holistic facial massage. A facial massage has many benefits. It can be anti-aging because it causes the blood to better circulate in your face. It can be relaxing by massaging in soft circular motions. Any type of massage is sure to relieve tension and a facial massage specializes in ridding the body of tension cause by squinting and straining the facial muscles. This type of massage is great for headaches or to help you fall asleep faster.

How To: Differentiate tunable and non-tunable bodhrán drums

In this how to video, you will learn how to tell the difference between a tunable and non-tunable bodhran. A tunable bodhran has a tuning mechanism to allow you to adjust the skin tension. A non-tunable bodhran is actually tunable, but it just needs more time to do so. A tunable drum has the tuning mechanism in the inside. They are lugs pressing on an inner hoop. When the key is turned clockwise, this will make it tighter. Make sure to go crisscross rather than around the circle when tuning. ...

How To: Thread a sewing machine step by step

This video shows us how to thread a sewing machine step by step. To thread a sewing machine: Place the presser foot in the upward position. Place a spool of thread on the spool holder. Traveling from the spool holder, across the top of the machine, look for a minimum of one thread guide. Insert the thread in the thread guide(s). Now look for a tension mechanism. Bring the thread downward to the tension mechanism, slip the thread between the metal disks of the tension mechanism, and travel bac...

How To: Suture a wound and understand suturing techniques

Lee T. Dresang, MD of the University of Wisconsin School of Medicine and Public Health from the Deaprtment of Family Medicine give a discussion and demonstration of suturing techniques. Before beginning a procedure, you will need consent. One should irrigate lesion before beginning. A simple interrupted suture is easy to learn and fast, but unable to withstand stress. Vertical mattress sutures provide a good eversion of skin edges, closure of dead space, and strength, but also lead to scarrin...

How To: Do a push up with medicine balls to build your chest

This video demonstrates how to use a few very simple tools to do a few variations on your push-ups, including how to do a medicine ball push-up. These exercises are great for stimulating muscle growth in the chest area. Before getting to the medicine ball push-up, we're shown some ways to more safely and effectively perform push-ups. One issue with the push-up is that when you put your hands on the floor your wrists are in a vulnerable position. When you can straighten out your wrist, it's sa...

How To: Fix a slack chainsaw recoil starter

In this video, we learn how to fix a slack chainsaw recoil starter. All you need is to wind up the recoil string so the tension can be put back on. First, remove the bolts out (there will be around four of them). Next, lift the side casing off and find the nylon spool with the cable cord wrapped around it. There will be a clock spring around that. Now, wind it up with a screwdriver while holding the spool of the corn and winding up the spoon a couple of times. When you reach the correct tensi...

How To: Fix a slack recoil starter on your chainsaw

In this video tutorial, viewers learn how to fix a slack recoil starter on a chainsaw. Begin by removing the bolts off of the side casing. If you leave the cord hanging out, it will make the saw much more difficult to start and can be caught onto things. To put more tension on the spring, wind the cord around the nylon spool and retract the cord. Make sure not to put too much tension in the spring or else the spring will break. This video will benefit hose viewers who have and use a chainsaw,...

How To: Pick a Deadbolt Door Lock with Bobby Pins Quickly

Whether you locked yourself out of your house, or just into experimenting with locks, check out this video to learn how to open a deadbolt door lock. No skill, no experience, and no professional pick tools needed -- just 2 bobby pins. Using very light torque to the tension wrench, insert another bobby pin and scrub over the pins from inside to outside. If the pins do not set after several strokes, release the tension wrench and do it again. Use a screwdriver when the plug is too tight to turn.

How To: Tape an ankle to prevent an inversion ankle sprain

Use tough skin spray adhesive, under wrap or pre-wrap, athletic tape to wrap an ankle. Position ankle in 90 degrees of dorsal flexion. Spray the adhesive to insure tight taping. Heel and lace pads are placed over tendons. Pre-wrap is applied, the goal here is to apply anchors so adhesive from tough skin will adhere to tape. Three layers are applied working towards the calf. Apply heel lock tape from the calf towards the heel, applying tension as you cross the bend in the ankle. The correct lo...

How To: Adjust a rear derailleur

Use a 5mm Allen wrench and loosen the bolt holding the cable on the rear derailleur. Thread the shift cable through the cable stays and tighten it in the rear derailleur with as little slack as possible. Make sure that the adjustment screw on the shifter is in the mid point of the adjustment.

How To: Get rid of a double chin with face exercises

In this video, we learn how to get rid of a double chin with face exercises. This works the chin muscle, known as the metalis. It also works the muscles at the front of your neck. This exercise exerts a gentle pressure on your chin and the front of your neck. It will tone and tighten your neck to make it look youthful and vibrant. It also tones your jaw muscle to define your jaw line and get rid of those jowls. First, stretch out your neck as far as it will go. Then, open your mouth and close...

How To: Wrap handlebars

In this video we learn how to wrap handlebars. First, open up the tape and remove the adhesive. Place the tape on the bar and then tuck in one half as you work your way up the bar. The adhesive should be on the bars and there should be tension on them so they lay flat. Once you finish wrapping this, make sure they are tight and secure. Check your work to make sure you didn't leave any gaps and the curve is smooth. Don't pull too hard if you are working with cork tape, this will cause damage t...

How To: Install a violin bridge

In this video, we learn how to install a violin bridge with Mike. First, loosen the tension of the strings, then take out the bridge from the violin. After this, pull the strings around so they are running straight. Tighten them, but not too much. You want a pinky worth of height in between the strings and the base. Now grab the bridge. The flat side will face the tail of the violin and the other side will face the opposite. The bridge should be place directly in between notches on the base o...

How To: Setting up your sewing machine

In this video, we learn how to set up your sewing machine. First, place the thread onto the top pin and pull it down. Then, wrap the thread around the bobbin pin and then push the pin onto the top next to the pin. Now, run the foot petal and keep threading until the spool is fully threaded. Next, place the spool in the bottom of the machine and place the lid back onto the bottom area. Now, thread the top thread down through the tension setting, through the hook, then into the needle. Now you ...

How To: Assess seatbelt damage

In this video, we learn how to assess seat belt damage. If you are looking at a vehicle that has been in a heavy front end accident, it's a good idea to make sure the seat belts are still in good working condition. If you see a seat belt that is just dangling and doesn't have any tension when you pull it, you know it needs to be replaced because it's no longer protecting you. On newer vehicles, the buckle for the seat belt will also have to get replaced depending on how old it is and how much...

How To: Replace a serpentine belt on a Chevrolet Aveo 1.6L

In this video, we learn how to replace a serpentine belt on a Chevrolet Aveo. Start off by turning the passengers side wheel to the right and raising your car so you can get underneath it. Now, remove the nuts and bolts that are underneath the belt so you can get to it. When you see the belt, remove it with tools and slide the belt off. Now replace the old belt with the new one and tighten the tension on the belt again. Make sure it's in all the grooves correctly, then reinstall all the parts...

How To: Give a good neck & shoulder massage

Relax your sweetheart after a long day of work with a neck and shoulder massage. First, you have the recipient take a deep breath (or a few breaths) to get them warmed up. Then, you start by squeezing the neck and shoulder muscles in the way shown in the video. The neck and shoulders store a lot of tension from driving, hunching over, computer work, etc. Put your arms into it as though you are kneading dough. That will give you the right amount of pressure to relive tired muscles.

How To: Give a massage

Psychetruth shows you how to give a massage. Start out by using any kind of oil, not to much, just enough to create slip. Take your thumbs and run down the spine. Feel if there are any points that need to be massaged longer. Move up to shoulder and work the mussels in that area. Then work the neck at the base of the skull. Lift up shoulders and massage out tension. Work your way down to the lower back. Move all around the back and work deep into the muscles.

How To: Tie a Jury Knot

This will show you how to tie a Jury Knot. Used at the mast head to "jury rig" a sailboat. The mast goes into the center of the knot, stays are run from the three loops and the two standing ends are run to the deck as a back stay. As tension is applies to the stays, the knot grips the mast tighter and tighter. This knot can be used in sailing, boating, general use, camping and bondage.

How To: Properly hold drumsticks

Holding your drumsticks correctly will reduce tension and give you greater speed and control in playing while reducing fatigue. In this video tutorial, DRUM! Magazine music editor Wally Schnalle demonstrates how to properly hold drumsticks and provides tips for best performance. Get a handle on drumstick grips with this how-to.

How To: Improve your posture with a Pilates roller routine

Better your posture and relieve tension with the foam roller routine demonstrated in this Pilates lesson. With Pilates, as with any physical fitness system, a basic mastery of proper technique is essential for both maximizing the effectiveness of your workouts and avoiding accidental injury. Whether you're looking to slim down or merely tighten up your core, you're sure to be well served by this home fitness how-to from the folks at Balanced Body Pilates. For complete instructions, give this ...

How To: Adjust a rear low-normal derailleur

Most rear derailleurs are high-normal, which means that they default the chain to high gear. Shimano derailleurs, however, are low-normal, defaulting to the lowest gear on the bike. This video details how to adjust a low-normal derailleur into normal cable tension. This works very differently than on a normal bike, so make sure you pay attention!

How To: Perform a horizontal mattress suture on a patient

The horizontal mattress suture allows the doctor or nurse performing them to minimize the tension being applied to a patient's wound by the stitch, which facilitates healing. This video features a doctor demonstrating how to perform such a suture on a pig's leg, teaching you one of the techniques that will help make you a more successful medical professional.

How To: Tie the artillery hitch in the wild

Tying knots and hitches can be an important survival technique. Having the right kind of knots made can make sure you're able to hold on to whatever it is you need. An artillery hitch or loop, is something that is used because it does not bind under tension and can be removed easily afterwards. This is a very complicated knot to perform so pay attention to this tutorial above and good luck!