Thermal Wind Search Results

How To: Make special effects makeup burn marks

There are a lot of videos out there that offer instructions for creating all sorts of fake wounds. Most of them, however, focus on cuts and gashes rather than that other devious and action-packed type of wound: the burn. This three-part video features detailed instructions for making a burn wound on your face or other body part using makeup and other household products. Now your characters get lit on fire and you can render the results accurately.

How To: Play Donovan's "Catch the Wind" on the ukulele

Want to play Donovan's "Catch the Wind" on your ukulele? Learn how with this free video ukulele lesson from Ukulele Mike. Whether you play the ukulele or bass kazoo, there is no better way to improve your chops than by learning to play your favorite songs. Not only is it more fun and much easier than running drills or memorizing a chord book by wrote, it's obviously also a wonderful way to build your repertory of songs. For more information, and to get started playing this classic Donovan pop...

How To: Do a vibrato for flute

Nina Perlove teaches vibrato for the flute in this instructional flute video. This technique can be applied to other wind instruments, too. This tutorial is great for a beginner attempting the vibrato for the first time, or for someone looking for ways to improve their vibrato. These exercises have a long history and have been tried and proven. Practice your vibrato on the flute and improve your flute playing skills!

How To: Play the pan-flute

Watch this winds tutorial video to learn how to play the pan-flute. This instructional video covers the tuning and some basic techniques for beginners who have never played the pan-flute before. This helpful how-to video will help you get started playing the pan-flute.

How To: Play a hit on a tin whistle

Watch this winds tutorial to learn how to play a hit, the easiest and most common type of Irish ornamentation, on a tin whistle. Even first-time tin whistle players will find this video helpful. You'll be able to play hits on your tin whistle in no time after watching this instructional video.

How To: Do an orbit at an orbit light show

In this video, we learn how to do an orbit at an orbit light show. The light should spin clockwise in one and and counter clockwise in the other. You must pay close attention to keep these spinning back and for. Start out by winding the lights up and mastering this so you can produce different shapes. After you learn the wind up, learn how to make the stars with it by winding it up one direction and let the orbit in the middle unwind itself in the opposite way. Once you're comfortable, you wi...

How To: Build a portable personal heater

In this video, we learn how to build a portable personal heater. This is a great weekend project that is easy to make and will keep you warm during a freezing winter. You will need: two double a batteries, charger, twin double a battery charger, winding wire, and balsa wood. First, cut the wood the size of the battery holder and cut it out. Now, reel off 30 ft of winding wire and hold down with duct tape. Wind the wire around the piece of wood and tape down the other end of the wire. Scrape o...

How To: Fix a slack chainsaw recoil starter

In this video, we learn how to fix a slack chainsaw recoil starter. All you need is to wind up the recoil string so the tension can be put back on. First, remove the bolts out (there will be around four of them). Next, lift the side casing off and find the nylon spool with the cable cord wrapped around it. There will be a clock spring around that. Now, wind it up with a screwdriver while holding the spool of the corn and winding up the spoon a couple of times. When you reach the correct tensi...

How To: Make a latex prosthesis chest wound effect

There is no such thing as a sucking chest wound. All chest wounds suck. Except perhaps for fake ones, which are essential to making a really gritty, gory film in most cases. This video features detailed instructions on how to make a fake chest wound out of latex and other special effects materials. Since it is a prosthesis, it can even be reused! It is a little complicated, but the end result looks great, so try this out in your next movie!

How To: Fix an Xbox 360 "ring of death" with a heat gun

In this video tutorial, viewers learn how to fix the XBox 360 "red ring of death" using a heat gun. To begin, users must disassemble their XBox 360 console. Users will be doing this procedure on the motherboard-heat each side for 4 minutes. Then let the motherboard cool down for about 6 hours. Finally, add some thermal paste on the GPU and CPU of the motherboard. Once finished, reassemble the XBox 360 console. This video will benefit those viewers who have an XBox 360 and want to fix the "red...

How To: Strengthen your career path with feng shui at home

Elizabeth Chamberlain with Space Lift demonstrates how to strengthen your career path with feng shui at home. First, find your focus room with your energy map by laying the energy map on top of your home floor plan. The career area is in the front center section of your home, along the line of your front door. In feng shui, all the energy enters through your front door. Encourage the energy up to your front door with your front yard. Feng shui means "wind water" which is the best way that ene...

How To: Tie the padlock knot

The padlock knot is designed to look like a padlock, but without the actual function of one. In order to tie this knot take your rope or string and fold it in half. After you have done that make a loop with both sides of the rope making sure you leave a loop at the top. Put the two loops together the one in the front turning clockwise and the one in the back counter-clockwise. Make sure to leave a hole in the center for the rope to pass through. Now wind each piece of rope through the hole in...

How To: Assess and treat a venous wound with a nylon dressing

Studying to be a nurse? Then here is a nursing how-to video that teaches you how to assess and treat a venous wound with a nylon dressing. Every nurse should know the basics of this technique, follow along and see how easy it is to treat venous wounds with nylon dressings. It is important to monitor the progress of your patient's wound throughout their stay. These medical tips are sure to help you pass your nursing exam with flying colors.

How To: Treat an extremity trauma wound in nursing

Studying to be a nurse? Then here is a nursing how-to video that teaches you how to treat a trauma wound in the right lower extremity. Every nurse should know the basics of this technique, follow along and see how easy it is to use suction with a diverted tip to treat a wound that came as a result of a trauma. Our host recommends using a suction device plus Aqua Cell and lyofoam as part of the treatment. These medical tips are sure to help you pass your nursing exam with flying colors.

How To: Play "Blowing in the Wind" by Bob Dylan on guitar

Want to learn how to play Bob Dylan on the guitar? With this tutorial you can learn how to play "Blowing in the Wind" by Bob Dylan on the acoustic guitar. This version is a simplified version of the song and is not exactly how Bob Dylan plays it. "Blowing in the Wind" uses the capo on the 4th fret. This lesson is geared towards intermediate guitarists because it assumes prior knowledge of guitar playing. Watch this how to video and you will be able to sing and play along to "Blowing in the Wi...

How To: Curl your hair with a curling iron and add volume

In this video from Bellabern she curls her hair with a curling iron. Section off a piece a piece of hair and use a comb to separate it. Then take the curling iron, put the hair through it and roll all the way up to the scalp while keeping the curling iron moving constantly. Something else you can use is thermal heat spray which will hold the curl. You keep applying this same technique for as many curls as you want on your head. With the bottom pieces of your hair you can curl them a little ou...

How To: Install Dry Core basement sub floor

First, the plywood or oriented strand board (OSB) subfloor floats on a corrugated or “cleated” waterproof underlayment, so the wood never actually touches the floor. The underlayment material can be made of Styrofoam or heavy-duty polyethylene, the same material used in corrugated plastic drain pipe (one of the toughest plastics available). This underlayment creates an air gap above the concrete. Combined with the wooden panels, the air in this space provides a thermal break that acts as insu...

How To: Repair 'red ring of death' without towels or tricks

This video is about repairing 3 Red Lights of Death Rrod X-Clamp Fix of XBox 360.The video begins with a warning saying that people need to careful while handling electronics and to use a proper size screw driver for the purpose and take it apart. Remove the old thermal paste and make use of come use of common goo removal stuff to clean the CPU and GPU. Finish the cleaning with alcohol to get shine on them. Make use of #8 washers from home depot and you can use smaller washers too. Put one wa...

How To: Make wind chimes using salt and pepper shakers

Here is a very crafty and cute way to create a wind chime out of old salt and pepper shakers that can be found either around your house or bought at second hand stores and a small tin tray or plate to hang your shakers from. A bit of out door or water-proof glue and some colorful string or twine, scissors and a nail or awl will finish out all the supplies you need.

How To: Create shock style text in Photoshop

In this Software video tutorial you will learn how to create shock style text in Photoshop. Go to the text tool and select it. Then select the font and a large size. Select white color and type in your text. Now create two copies of this text and select the original text. Then click on image > rotate canvas > 90 degrees clockwise. The text will turn by 90 degrees. Now go to filter > stylize > wind. Make sure under ‘method’, ‘wind’ is selected and under ‘direction’, select ‘from ...

How To: Know the basics of building a kite

The video is about the basics of building a kite. The wind takes up the kite up. The first is a slate kite. A stable kite capable of flying in very light winds. The wind lifts the kite. The lift acts against the gravity. The tension on the string resists the drag by the wind. To construct such a kite, you need a plastic bag, scissors, some string, sticks. The dimensions are important. It need 45 cms length and 50 cms width in a specific dimension. The all project can be found in website hilar...

How To: Tie fishing knots

Learn the right way of tying 3 handy fishing knots by watching this video. The first knot shown is the 'Clinch Knot'. One end of the fishing line is passed through the eye of the fishing hook. This end is pulled and wound around the main line about 6 to 8 times. Thereafter, the free end of the line is passed through the small loop formed at the beginning of the winding process. The winds are gently pushed to tighten the knot. The free end is then tucked in to complete the clinch knot. The nex...

How To: Change a string on an acoustic guitar

In this tutorial, we learn how to change a string on an acoustic guitar. First, you will put the string in the bridge pin. Make sure the ball from the string is against the bridge plate. If the ball is underneath the bridge pin it will make the string come out easily. After you have the string locked in, pull the string out tightly until it reaches the bottom of the guitar. Pull it to the tuner you want to wind it to, then pull it out a couple of more inches to know how much slack to give it....

How To: Play "Colors of the Wind" from Pocahontas on ukulele

Want to play "Colors of the Wind" from Walt Disney's Pocahontas on the ukulele? Learn how with this free video ukulele lesson from Ukulele Mike. Whether you play the ukulele or bass kazoo, there is no better way to improve your chops than by learning to play your favorite songs. Not only is it more fun and much easier than running drills or memorizing a chord book by wrote, it's obviously also a wonderful way to build your repertory of songs. For more information, and to get started playing t...

How To: Make a blood burst machine for film

Alright, so you have some fake blood, and you want to use it in your movie. Unless you are showing a wound after it has happened, and if you want to do anything depicting people getting shot, you are going to have to find a way to make the blood "shoot" out of the wound when it happens. This video features instructions for making a homemade blood burst machine that you can use to make your actors spurt blood when they get shot, sliced, or whatever else you plan on making happen to them.

How To: Fuse two finshing lines with the blood knot

He explains how to tie a "blood knot" and what the blood knot is used for, which is joining two separated rope/string ends. He demonstrates the knot, which starts by taking the two lines and lining them up one on top of the other, so they are parallel to each other. Then, start winding one end around the other, at least 3 or 4 times. Do the same with the other loose end as well. Then, place the first end through the wound part of the two ropes where you started. You pass the other end through...

How To: Wind a center pull ball of yarn

A classic demonstration on how to wind a center pull ball of yarn. take the end of the yarn and wrap it around Your fingers. Keep wrapping over the first loop to shape it like a ball but keep the first loop sticking out. When everything has been winded up, just pull the first loop out and start making a crochet or whatever project You may want to use Your yarn with. Follow these steps and You won't worry a again of tangling Your yarns.

How To: Make hard drive wind chimes

Learn how to reuse a crashed hard drive or two for a set of wind chimes with this great tutorial. Easy to make and sound great. You will need a #6 and a #8 tork screwdriver, an exacto knife, a pair of needle nose pliers, a phillips and a flat screwdriver, red fishing line and an old hard drive.

How To: Play the tin whistle

Watch this winds tutorial video to learn how to hold and play the tin whistle. This video is intended for people who have never played the tin whistle before. This helpful how-to video will teach you all you need to know to get started playing the tin whistle.

How To: Develop your own style on the tin whistle

Watch this winds tutorial video to learn how to develop your own style on the tin whistle. This instructional video is intended for intermediate tin whistlers. After you've watched this helpful how-to video, you'll be able to develop your own playing style on the tin whistle.

How To: Play a cut on a tin whistle

Watch this winds tutorial video to learn a basic but crucial ornament, the cut, on the tin whistle. The cut is very similar to the hit and is a good technique for beginners to learn, but it takes a lot of practice. Tin whistlers of every level will find this instructional video helpful in learning how to play the cut on a tin whistle.

How To: Play the roll on a tin whistle

Watch this winds tutorial video to learn how to play a more difficult type of ornamentation, the roll, on a tin whistle. The roll takes a lot of practice to learn, and it is a combination of the cut and the hit. Tin whistlers will find this how-to video very helpful in learning how to play a roll on a tin whistle.