In this Arts & Crafts video tutorial you will learn how to do a lanyard super cobra stitch. For this you will need two pieces of gimp cord; one piece about 15 times longer than the other. Start the same way as you would with a regular cobra stitch. Make a loop on both the cords and pass the loop on the shorter piece through the loop in the longer piece. Then pass the upper end of the longer cord around the shorter cord and pull it up from under through its own loop. Now pull both ends to make...
This how to video shows you how to pack a suit. First, start off with the jacket. Fold one half inside out. Take the other half and tuck the sleee into the other. The shoulders should be lined up and straight. Pop up the collar and then stuff the shoulders with your socks. Pack the area below it with underwear. Fold the sleeve over and then roll it down tightly. Now you will not have creases on your jacket. For the pants, fold it in half and make it as dense as possible. You should be able to...
In this how-to video, you will learn how to make Cobra-style paper airplane. All you need is a regular piece of paper. This style is useful for hitting targets or flying straight. Fold the paper in half vertically and unfold. Take the top corner of the paper and fold it to the edge of the middle crease. Repeat with the other corner. Take the tip of the center and fold it to the horizontal line created by the folded corners. Make sure you make tight folds. Open it up and make a fold horizontal...
Install a pond skimmerThe most critical steps to installing a skimmer are the water level and attaching the liner to the face plate with a water tight seal. The pond should be rocked in. The skimmer needs to be level from front to back and side to side. That's critical. Optimum water level is approximately 3/4 inch down from the top of the steel face. Use the level (tool) to determine the water level on the face plate. It's important to have the weir door work effectively. Prepare the area fo...
In order to begin, you will need the following: Three hair tiesBobby pinsHair spray or spray gelRat tail combHair net
In this video presenter Dominic shows you how to use a Jig Saw correctly. Dominic suggests that if you are going to make a tight turn then you should use a skinnier blade in order to avoid banging up the wood or breaking the jig saw blade. He adds that you should be patient and try not to go too fast. With the jig saw you first have to drill a hole in the wood and then put the jig saw through as the blade is flexible and cannot be pushed through by itself. He suggests trimming off the first p...
Cindy Mastry, Yoga instructor from YogaEtcStudio shows us how to do the yoga exercises to flatten the stomach. She considers the best exercise to flatten the stomach is the cleansing practice called as Agnisaar kriya which actually means Fire wash where you are washing the fire in the stomach. it not only flattens your abdomen but also improves the digestive and eliminatory system. For this you need to do is to inhale and reach your arms up to the sky and then you need to exhale and bend your...
Get all of the objects you use for your shave. Make sure your razor is sharp. Your daily shave should be a delight and not a chore. Start by washing your face with hot water. The hot water opens up your pours allowing your beard bristles so be pushed out. Message a pre-shave product into your face. This helps soften your beard. With a brush lather up your face paint brush style not in circular motions. The lather should be a nice thin even coat. This will help keep pores from closing. Shave y...
The video shows us how to throw a curve ball like a college pitcher. There are actually keys to throw a curve ball. Number one is the grip, number two, your arm speed and number three is the position of your hand when you throw the ball. First step is to focus on the grip and here it is going to be on a two seam and your index finger and your middle finger is placed on the right side for right hand throw and on the left side of the ball for left hand throw for the exact gripping. Number two i...
FoodNetworkTV shows you how to make three-cheese ravioli. This filled ravioli also includes pancetta and wild mushrooms. To make the dough take one pound of flour pour right on the table and make a well. Put in eggs and kneed together. Let it rest then begin the sauce. Coat your pan with oil, smash some garlic in pan add pancetta then remove garlic. Slice the mushrooms and put them in the pan with some chicken stock. For the filling add some ricotta, eggs,parmesan, and taleggio cheese. Place ...
*Iris is out there to demonstrate how to use the flat iron to get the waves in your hair *She is going to show how to get the Hollywood style waves in your hair.
Make your way through The Saboteur for the Xbox 360. In the eighth mission in Act 1: Doppelganger, the ambassador will rendezvous with a German official near the Place des Vosges. Security will be tight around the ground level, but you should be able to find a vantage point among the rooftops. For more info, watch the whole gameplay.
Ingrown toenails happen when the nails on your toes grow in the wrong direction and dig into the surrounding skin. Follow a few easy steps to treat this painful condition, and prevent it from happening again.
In this video tutorial, Wess does some research and builds a steady-cam for under fourteen bucks. Hooray for no more motion sickness!
Increase arm strength with side dumbbell lateral raises. Learn how to work out with dumbbell exercises in this training video. Take action: begin with moderate weight, keep shoulders back and chest high with abs tight, doing slow and controlled movements. Michelle, the instructor in this how-to video, is a personal trainer at a gym in NC and has been a personal trainer for several years. She is certified through ACE and is a certified aerobics instructor as well. Her Specialty is weight lifti...
Increase strength in the triceps with triceps kick backs. Learn about muscle growth with arm exercises in this fitness video. Take action: keep head in line with spine, only movement should be with lower arm, and keep core tight. Michelle, the instructor in this how-to video, is a personal trainer at a gym in NC and has been a personal trainer for several years. She is certified through ACE and is a certified aerobics instructor as well. Her Specialty is weight lifting and she enjoys training...
Add deep squats to your workout to really strengthen your legs. Learn how exercising with squats can strengthen the legs in this fitness video. Take action: feet wider than shoulder-width, toes pointed out, keeping abs tight and chest high, squeeze quads at top of movement. Michelle, the instructor in this how-to video, is a personal trainer at a gym in NC and has been a personal trainer for several years. She is certified through ACE and is a certified aerobics instructor as well. Her Specia...
Work out your arms with dumbbell concentration curls. Learn how to exercises with curls in this fitness video. Take action: stay tight without rocking, get full range of motion, squeeze at the top of the movement, and plant your elbow. Michelle, the instructor in this how-to video, is a personal trainer at a gym in NC and has been a personal trainer for several years. She is certified through ACE and is a certified aerobics instructor as well. Her Specialty is weight lifting and she enjoys tr...
Have you tried working out with barbell shrugs? If so, you know that shoulder shrugs are an essential part of lifting weights and strength training. This fitness how-to video demonstrates work out the back with shrugs and a barbell. Learn how shrug exercises with weights can increase strength and flexibility in this video.
Have you tried working out with Good Morning Exercises? The Good Morning exercise done with a barbell is an essential part of strength training. This fitness how-to video demonstrates use the "Good Morning" exercise to strengthen the core and increase flexibility. Learn how to do this exercise with a barbell in this training video.
Have you tried working out with dumbbell shoulder presses? A dumbbell shoulder press is an essential part of lifting weights and strength training. This fitness how-to video demonstrates how to use dumbbells to increase shoulder strength with shoulder presses. Learn how to increase arm strength in this workout video.
Have you tried working out with an inner thigh lift? If you have you know that they are an essential part of body toning and strength training. This fitness how-to video demonstrates how to work out your thighs with inner thigh lift exercises. Learn how to increase muscle strength and flexibility with this training video workout.
Have you tried working out with a swiss ball? A swiss ball and outer thigh lifts are an essential part of toning your legs and strength training. This fitness how-to video demonstrates how to target the outside of your thighs with outside thigh lifts. Learn about muscle training and exercises in this video workout.
Have you tried working out with a single leg bridge exercise? Single leg bridge exercises are an essential part of lifting weights and strength training. This fitness how-to video tutorial demonstrates how to gain leg strength with single leg bridges. Learn about working out leg muscles with exercises in this workout video.
This Honda DIO customization video series will show you how to increase the size of the stroker crank in a Honda DIOS scooter by installing a mega stroker crank.
Rag rugs were commonly made in households up to the middle of the 20th century by using odd scraps of fabric on a background of old sacking. Begin making rag rug with two ribbons tied in a knot. Attach a rug tool to the left strand. You can use a traditional latch hook, needle punch, or substitute tool. For the first row, repeat a simple process of tying knots. Don't tie them too tight, as you must thread the latch hook through each knot again to link the strings of knots. This video provides...
Learn how to do seated dumbbell shoulder presses. Presented by Real Jock Gay Fitness Health & Life. Benefits
This sounds a little crazy, and it is—in a good way. Cooking food in the dishwasher while it cleans your dishes multitasks your appliance and saves time and energy. And who doesn't want to spend less time over a hot stove? How Dishwasher Cooking Works
You've probably seen someone in your family truss the turkey on Thanksgiving before roasting it, even if you don't recognize the word. To truss a bird or roast just means to wrap it up as compactly as possible before placing it in the oven, and it's usually done by tying it with string. Trussing a bird is a tradition that's been around for a long time, and a lot of home cooks do it religiously even if they don't know why. It's a highly debated topic with fierce supporters on both sides, but f...
When you're using vacuum power, moving water, or compressing air, it's more than likely being done with some sort of pump. I'll be needing a pump for some of my future projects, so in this tutorial, I'll be showing you how to make your own customizable PVC hand pump that will let you do all three.
Let's face it, not everybody's perfect. But that doesn't mean that everybody is special or beautiful. But for those of you without the thin, lengthy legs, there's hope for beating your insecureness. Lengthen the look of your legs with your attire and show off your bashful thick legs.
First, get your supplies ready. These would include bowls, gloves, cups with and without spouts, measuring spoons and molds.
First, you will need a surfboard cable modem. You will need a wireless router with an unscrewed antenna and a power cord. Make sure you have two ethernet cord and a computer. First, take the surfboard and screw the cable into it; make sure it is completely tight. Next, take the router and one ethernet cord. Look for the spot that reads WAN; plug the ethernet cable into this spot. Take the other end of the ethernet cable and plug it into the port on the surfboard.
Rayann shows us techniques to make macrame designs using hemp for the creation of fun, interesting jewelry designs. She shows us four techniques. First she introduces us to the half-knot using four strands of hemp. The right-hand strand is brought across the others in the shape of a backwards four, while the left-hand strand is brought behind the others and through the loop created. A series of half knots will result in a spiral design along the length of the jewelry.
In this how to video, you will learn how to tell the difference between a tunable and non-tunable bodhran. A tunable bodhran has a tuning mechanism to allow you to adjust the skin tension. A non-tunable bodhran is actually tunable, but it just needs more time to do so. A tunable drum has the tuning mechanism in the inside. They are lugs pressing on an inner hoop. When the key is turned clockwise, this will make it tighter. Make sure to go crisscross rather than around the circle when tuning. ...
This video shows how to make a recipe for pork potstickers. This recipe utilizes leftover pulled pork which is not made during the video. Some of the pulled pork is placed into a large mixing bowl. Next a table spoon of minced garlic is added to the bowl followed by a pinch of salt and ground black pepper. Afterwards, thinly sliced scallions as well as chopped cilantro are added to the mixing bowl. The mixture is then thoroughly mixed to combine and distribute all of the ingredients; this mix...
This video shows us how to make distilled water for your carnivorous plants, such as a Venus Fly Trap.
This video describes the different parts of a pressure cooker, and how to use it. The pressure cooker consists of a heavy gauge pot and a tight fitting locking lid with a pressure release and a button that pops up when the right pressure is reached. There is also a quick release valve that you can turn manually. There is also a gasket that fits inside the lid to keep the pressure in the pot. To assemble the pressure cooker, insert the gasket under the flanges in the lid, line the lid up on th...
How to make a great green apple martini. First we start with the tools of the trade, you will need a glass, champagne or martini glass will do, next a set of tumblers, a speed pour-er, and a martini strainer. Now that all of those are laid out we need to chill the glass down, so take the larger tumbler and fill it 3/4 full of ice. Add the ice to the glass and set aside. While the glass is chilling out, we need to get our liquor out and ready to mix, these are the liquors needed:
This video teaches us to use a bead reamer to smoothen sharp edges on a bead. You need a reamer, some water and the reaming tips. We need the large tip for enlarging and smoothening the holes and a 45 degree edging point for smoothening the edges of the hole. Twist the handle of the reamer and insert the tip in it. Take the bead and the reamer with the large tip & dip it into water periodically during the procedure so that the water acts as a lubricant. Begin filing the inside of the bead hol...
