Tight Bodice Search Results

News: Magnetize Any Socket/Wrench

Video: . Ever have trouble getting out spark plugs because you can never hold on to them? Or how about dropping a bolt or a nut in a tight spot? Now you dont have to worry about that every again because the guys at www.PoorManMods.com show you how to magnetize you sockets and wrenches to make your life a little easier and more efficient!

How To: Tie a karate belt on your child (or another person)

In this how-to video, Sensei Paul Adams will teach you how to tie your belt on your karate kid. The belt will be very stiff at first, but will loosen up over the years. Take the middle of the belt and place it on their belly. Take the ends and pull them all the way around until they reach the belly again. Make sure the belt is snug the whole time. Place the right side over the left and pull that end under both layers of the belt. Once this is done, pull the left end over the right and tie a t...

How To: Dress like an Emo Indie rocker

Eddie Rivera shows how to dress like an Emo and shows that your style will depend on where you live. Indie Emo is different from nerdy Emo. You'll need dyed black hair with bangs cut straight across, spiked in the back. Some blonde streaks work well for girls. Piercings, the more the better and jewelry the same. You'll also need thick, black horn rimmed glasses and t-shirts with slogans. The key is you look like you bought your items from a thrift store, but you didn't, but you really did acc...

How To: Do Sumo squats

In this video tutorial, viewers learn how to perform a sumo squat. It is the same as a regular squat, except the legs are extended more wider. The bar should be setup a little bit below your shoulder level. Go into a split stance when picking up the bar. Keep your core muscles tight and keep the bar stabilized. Spread the legs wide, pass the shoulder width. This exercise target the leg muscles and helps strengthen them. Inhale when going up and exhale when going down. This video will benefit ...

How To: Make a long drawstring skirt for under $5

In this tutorial, we learn how to make a long drawstring skirt. You will need: knit stretch fabric ( 1.5 yards), safety pin, scissors, marking tool, and measuring tape. First, measure your hips and decide if you want your skirt to be tight or loose. For a tight fit, you want 2 inches of ease and for a loose fit, you will want 3-4 inches of ease. You can now decide how long you want your skirt to be and add 2 inches to that. Now cut your fabric and fold it in half, then cut it straight down. A...

How To: Put on a spray skirt in kayaking

In this how-to video, you will learn how to put on a spray skirt while kayaking. This is important if you want something to wear while you kayak. A dry top has a latex neck and wrist. A semi-dry top has a neoprene neck and wrists. For both of these, a feature called a double tunnel is built in. This means there are two layers on the top. The skirt creates a water tight seal and keeps you dry. First, get your arms in the dry top. Poke your fingers through the gasket on the wrist. This takes ef...

How To: Make paper flowers with Stampin' Up!

Dawn Griffith demonstrate simple and easy way of making paper flowers using card stock paper and wall paper. First take pink card stock and using XL fancy flower cutter punch 8 flowers. You can take card stock or any designer wall paper which is a thin paper when compared to card stock, so you do not need to wet paper like in card stock. Next spray water on flower cut card stock paper and squish up into a tight ball. Do like this for all 8 flower cuts. Then gently unfold all squished paper ba...

How To: Make a flower from a recycled dryer sheet

This video is about how to make flowers from recycled dryer sheets. Since the dryer sheets have already passed through the dryer it will be wrinkled but it does not matter. Cut the dryer sheets into strips 1 inch wide approximately and need not be uniform. Take a button and place the edges of the3 strips in such a way that it takes the shape of the flower and the other edge collects at the button holes. You may color the dryer sheets with dye like Ranger perfect pal mixed with water and spray...

How To: Wrap your ankle after an injury

As you apply the wrap you want the most pressure down by your toes and the least up your leg above your ankle. That keeps swelling out of your feet and back up toward the heart. Start by wrapping around the base of the foot. As you move up toward the ankle you will begin wrapping the ankle in a figure eight going around the ankle and then around the foot. You want to wrap the ankle 3-4 times to give it some good stability. Then wrap the ankle in circles around the ankle and then up the leg. Y...

How To: Make a trigger-operated paper gun

This is an instructive guide to making a trigger operated paper gun. You will need an A4 sheet of paper. Start by rolling the sheet of paper horizontally (breadthways) and as tightly as possible, . Once the roll is completed, attach 3 lengths of sticky tape at each end and the middle, so it doesn't unravel. Then proceed to wrap another sheet of A4 paper around your existing roll, making sure that is as tight as can be so it is strong and sturdy. Again, attach sticky tape at each end and the m...

How To: Tie the caterpillar sinnet

Learn tot tie the caterpillar sinnet with this video tutorial. 1. To start the sinnet, place rope in hands with one piece in your left hand and the other in your right. 2. With the rope piece in your right hand, create a loop with the top of the loop being the piece from your left hand. 3. Take the piece of rope in your right hand and slip a small piece of rope through the loop. 4. Gently pull the rope in your left hand tight. This will have created a new loop and link below it. 5. To create ...

How To: Build the y-axis gantry rail support for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Tie the slim beauty knot for fly fishing

Tie a double overhand knot 4" from the end of the shock tippet or other material to which you want to connect your class tippet. Gently tighten the double overhand knot, but only until it turns over and forms a figure-eight. This leaves two gaps through which you can pass the tippet material. Create a doubled section of your tippet 18". Putting a sharp angle on the tip of the doubled loop will help it pass through the figure-8. Pass the doubled tippet line through the top of the figure-8 knot...

How To: Use the rattlesnake knot, square braid and other paracord braiding techniques

Paracord braiding is a popular technique used to make lanyards and ties for survival gear. There are many different techniques a braider can use - the most common are the rattlesnake knot and the square braid. This video shows you the nuances of both techniques, a few variations, and how you can decide when to use one or the other. You can also alter the appearance and tensile strength of your paracord braid by changing how tight you make your knots.

How To: Attach guzheng nails onto your fingers

In this video, we learn how to attach guzheng nails onto your fingers. You will need: set of 4 guzhen nails and surgical tape to do this. First, place the nail on the underside of your finger with the tip protruding. Next, take a strip of surgical take and stick it onto the nail at one end, then roll over your finger. The tape should go over your finger 2.5 times. Make sure the tape isn't too loose or tight, and that it's just right around the finger. Repeat this process on all of the nails, ...

How To: Make a eurpoean hand tied bouquet

This is a demonstration of making a hand tied bouquet.Keep all the required articles nearby on the table.Take a few stems of lemon grass and bind them with a wire to form a single bunch.Tie the aspedestra leaves in a loop with wrapping a wire to the stem.Now take the stems with single flower like movie star roses or carnations or iris or tulips pluck or cut the loose petals.Now hold one of the stems loosely in the left hand,now with the right hand place the second stem so that the flower is o...

How To: Properly tie a karate belt

In this Sports video tutorial you will learn how to properly tie a karate belt. This video is from Tiger Strike. There are two ways of doing this. 1st method. Take 3 hand lengths of the belt from one end, place it on the right hip wrap the belt around the waist with the left hand twice. Then take the other end and pass it underneath both the layers of the belt from bottom to up, pull both the ends and make them even. Now take the left end, put it over the right side end then pass it through t...

How To: Propagate iceplants and african violets

to transfer ice plants, take a Styrofoam cup with holes in bottom and sides for drainage. fill cup with potting soil. place cuttings of ice plants into pot, about 2-3 cuttings per cup. keep moist. for African violets, snap off an entire leaf including the stem. fill a Styrofoam cup with water. cover with saran wrap with a rubber band around the edge to keep it tight. cover completely with aluminum foil to keep inside of cup dark. place hole in center of plastic/aluminum foil with a pencil. pl...

How To: Make a tie dye t-shirt dress with ELLEgirl

Joyyan King, Fashion editor and Marsha Welcher shows you how to create a tie dye t-shirt for yourself. A white cotton t-shirt dress is chosen and taken to the work table. Cotton holds the dye well hence it is ideal to go for a cotton dress for tie and dye. Lay out the dress over a table covered with news paper then pinch the center of the dress and twist it to screw it around, the tighter it is twisted the more better the designs would be. After twisting tight it would look like a flower, the...

How To: Tie a double bowline knot step by step

In this Disaster Preparation video tutorial you will learn how to tie a double bowline knot step by step. Robert Segundo, knot tying expert, presents this video. This knot is stronger than the regular bowline knot. When you put a knot on a rope, its strength reduces. This knot will retain about 70-75 % of the original strength of the rope. For this knot you will need a piece of rope or twine. Start off by putting a loop on the rope and then put a double loop. Then take the working end of the ...

How To: Tie your belt in karate, in 2 ways

In this how-to video, you will learn how to tie your belt in two different ways. For the first method, take the halfway point of your belt and place it at the belly. Wrap it around and then take the ends an go underneath and through with the right side. Take the left side and wrap it over the right. Tighten the knot. For the second method, take a section of the belt and wrap it around your body. The right will go over the left and go through. Take the left and go over the right and wrap it th...

How To: Wax a snowboard in two minutes

To wax a snowboard you will need an iron, board wax, a flat scraper and a buffer pad. First, use the iron to melt the wax. The iron should be hot enough to cause the wax to quickly drip but not hot enough to produce smoke. Iron the wax onto the snowboard by using small concentric circles to melt the wax evenly. Go over spots several times, if necessary. Be sure to use wax that is appropriate for your riding conditions. Scrape the excess wax off of the board. Use a buffer pad like the rough si...

How To: Get rid of spider veins

Dr. Schultz explains how to get rid of spider veins. The best treatment for spider veins depends on where they are. 1. On your legs, the best treatment is injections. It takes one to several treatments after which you will then be advised to wear tight compression stockings for three days. 2. If the spider veins is on your face, the best treatment is lasers where they usually work the first time and is not painful. 3. See your dermatologist for a treatment to get rid of spider veins.

How To: Tie a perfection loop knot

This is a video demonstrating how to tie a perfection loop. This is a loop that is necessary for fishing. It can be using for sinkers and fly fishing. It is good for any purpose where a loop is needed. A loop is made first. The loop is held between the left thumb and index finger. The end of the line is taken and put over the loop. Then switch hands and take the end of the line below the main line, making two loops. Then the end of the line is placed between the two loops. Take the top loop n...

How To: Tie your shoes with only one hand

This video tutorial is in the beauty and style category and it is going to show you how to tie your shoe laces with only one hand. First you need to tighten up the laces and then you will have to tie the laces with the overhand knot. Take the lace on the side of the hand and hold it between your thumb and the forefinger. The distance you go is equal to the size of the hand. Pull the lace and grab it with the first joint of the little finger. Now you got to free your thumb and the forefinger g...

How To: Change the transmission fluid on a Honda Civic

To change the transmission fluid on a Honda Civic, you will need a good rug, a drip pan, 10 quarts of transmission fluid, a funnel and a ratchet wrench. First, remove the dipstick to release the pressure on the liquid. Then, remove the drain plug with the ratchet wrench. You may need to bang on the bolt with a cheater bar to loosen it. Drain the fluid into the pan. Then replace the drain plug until it is hand tight. Use the ratchet wrench to tighten the drain plug. Clean up the excess transmi...

How To: Make a digital pinhole camera on a budget

In this video you learn how to make a digital pinhole camera. The video begins with an introduction addressing the main themes to be dealt with in the video - tight budgets, photography and specialized lenses. In this video, Kai modifies a photo lens cap by poking a large hole in it. After making this large hole, he makes a smaller hole in a thinner material and lines the hole up in the center. He calculates the size of the hole he needs based on the wavelength he will be photographing. He us...