Tournament Pulls Search Results

How To: Do useful survival knots

In this tutorial, we learn how to do useful survival knots. To make the sheet bend knot, you will join two different ropes together. First, make two loops, one on each end of the separate ropes. Next, take one of the ends and insert it into the other. After this, take the loose end and push it through the loops. After this, pull it tight and you have your sheet bend knot! The next knot is the bowline knot, which is a secure loop knot. First, make a loop in the rope, then take the smaller end ...

How To: Crochet and latch hook hair

In this video, we learn how to crochet and latch hook hair. You will need a large crochet hook and synthetic hair. First, take your loose hair and make sure it's free of tangles. Form a small loop, then insert the hook underneath the corn row until it's all the way through the braid. Once the small latch goes through the hair, insert the loop to the hook, and pull the hook down, so the hair is threaded through. Pull the hair through the loop and pull to make a knot. Now, separate the hair and...

How To: Load fly fishing line on a rod and reel

Want to go fly fishing but lack the necessary technical know-how when it comes to the sport's specialized equipment? Never you fear, brave pescador(a): with this fly fisherman's how-to, you'll learn how to load fly fishing lide on a rod and reel. When loading fly fishing line on a rod and reel, pull the leader out to get down to the fly line, and pull the line through the guides so that the line will cast properly. Learn how to pull the entire length of the leader through the tip guide with h...

How To: Make a front-post double crochet stitch

First of all you need to work around the stitch that you have made in the previous row. To make this front post double crochet you have to first loop over the yarn on the hook. Now pass this into the first stitch of the previous row at the bottom. Go around the stitch to the back and from there you have to come back again to the front. Now yarn over and pull it through the loop. Again yarn over and pull it through the two loops as shown. Again yarn over and pull it through the last two loops ...

How To: Play "Stuck on You" by Lionel Richie on ukulele

In the left side of your screen you can see the brown color bar which shows the different strings sections of the Uke Player. When a particular note has to be played that shall also be displayed by blue buttons on the screen. You have to watch these blue buttons and then follow it to pull the strings on your Uke Player. First you have to pull the second section of second string, third section of the third string and the second section of the fourth string. In the next note you have to pull th...

How To: Make a half double crochet stitch

First of all you need to need to chain one more the amount of the stitches that you wish to complete. In this example you have to do six chains. So you have to do five half double crotchets. To begin first you have to yarn over once and then skip the first two stitches and then work into the third and then yarn over and then pull through the one. Now again yarn over and then pull through all three. Now again yarn over once and insert it through the next stitch and then pull through all three....

How To: Make a double-crochet edge

This video demonstrates how to make a double- crochet edge. The video uses a large cardigan neck to create a double crochet edge on. First, back the yarn around the hook and go into the next stitch. Then pull through a loop on to the hook. Take another loop on to the hook. Next, go through the first two stitches at the end of the hook. Then take another loop onto the hook and go through the last two stitches. So, you wrap, insert through next stitch, pull on another loop, draw the hook throug...

How To: Take Apart Your PS3 to Clean the Lens

This video shows how to take apart a Play Station 3 (PS3) in order to clean the disc reading lens. First locate the sticker that says "void if removed" and remove the plastic cover from this point with a screw driver. Once this cover is removed there is a second cover which is removed by unscrewing the nine screws which hold it into place and rotating the cover towards the front of the device. Disconnect the disc housing on the right by pulling out the smaller cable then remove the five screw...

How To: Tie pointe shoes properly

This video demonstrates how to properly tie ballet shoes before doing ballet. First, in addition to the ballet shoes, some paper towels will be needed for padding. Fold about three paper towels together until they form a rectangle approximately 3" by 4". This will be used to pad the toes. Now, pulling the show onto the foot, pull the strap over the top of the foot and place the folded paper towels around the toes and top of foot to pad. Pull the shoe snugly onto the foot. The side straps shou...

How To: Strap down large items to the bed of a truck

In this video tutorial, viewers learn how to strap down large items to the bed of a truck. Users will just need a long rope. The rope should be long enough to wrap around the back of the truck. Take the rope and make a loop. Then wrap around it and pull. It should look similar to a rope noose. Make sure it is tight. Then take the other side of the rope and put it through the loop. Pull on it to tighten. Then wrap around it and pull. Do this several times to secure it. This video will benefit ...

How To: Replace the burned out headlights in your car

In this Autos, Motorcycles & Planes video tutorial Tool Dude Tony will show you how to replace the burned out headlights in your car. It’s pretty simple. Open the hood. Then pull out the electrical connector by pressing down on the locking mechanism and pulling it straight back. Next remove the locking ring that surrounds the bulb. Pull the bulb straight back. Remove the new bulb from the packing, put it straight in without touching anything. Put the locking ring back and plug in the electric...

How To: Use a crochet hook to maintain dread locks

Hold crochet hook with dominate hand, needle facing toward you, hold dreadlock with left hand. In a spot with numerous loose hairs poke needle through dreadlock to other side. Grab loose hairs with needle and pull them through the dreadlock (use hands to keep loose hairs on hook if necessary and to hook more hairs). Be sure to curve crochet hook out of dreadlock so it will not pull loose hairs out the other side. Do not pull crochet needle straight out, this will rip the hair and strip it.

How To: Factor a trinomial, GCF, then unfoil

In this video the instructor shows how to factor a polynomial. A polynomial having three terms is called as trinomial. Now if you factor it you will obtain two binomials whose product will be the original polynomial. Before factoring a polynomial you need to find out if the polynomial has a GCF. Look out for the common variables in all the three terms and pull them out which is the GCF of the polynomial. This simplifies the original equation to a polynomial which is of lower degree. Now facto...

How To: Perform a knitted bind-off on the "wrong side"

This video teaches the viewer how to do a knitted bind-off on the back side of the piece, the side that this is not usually done on. In other words, it is a pearled bind-off. First, do two pearl stitches, then go into the first of the two stitches and pull it into the second of the two. Repeat the procedure with another pearl stitch and putting the needle into the stitch before it and pulling the yarn through the second one. On the last stitch, use a crochet hook to pull the yarn through the ...

How To: Install cabinet organizers for pots, pans & trash cans

This do-it-yourself video from Lowe's describes how to plan and install a pull-out wastebasket and a two-tier shelf. He explains how storage should work within the kitchen triangle. The pull-out wastebasket frame attaches easily with screws. He then adds a slide-out feature so that the door pulls the wastebasket out. The two-tier wire basket is used to hold pots and pans. Slides are attached to support brackets, the frame is set inside the cabinet and attached with screws. Cabinet organizers ...

How To: Tie four basic knots in jewelry design

To tie the overhand knot, make a loop and pass one end of the string through the loop and tighten by pulling both ends. To tie a double overhand knot, make a loop and pass one end of the string through the loop twice before pulling both ends to tighten the knot. To tie a surgeon's knot, take the left string and bring it over and around the right string twice. Then take the right string over and around the left string and pull both ends to tighten, leaving a complete loop of string below the k...

How To: Pull Off the Greatest Cup Prank Ever

This could quite possibly be the easiest and funniest prank you could ever pull off on someone, all you need is a cup, straw, and lid. It is so unpredictable, No one will ever suspect a thing till they're completely wet. Find out how to execute this Funny prank by watching this video. Use this as inspiration for one of your April Fools Day pranks!

How To: Use queries to pull data from tables in MS Access

The Microsoft Office Access 2007 relational database manager enables information workers to quickly track and report information with ease thanks to its interactive design capabilities that do not require deep database knowledge. In this Microsoft Access video tutorial, you'll learn about using relationships and queries to pull data from tables. For more information, watch this Microsoft Office Access how-to.

How To: Stretch with a partner

There are some muscles that cannot be stretched alone. For these muscle stretches, a partner can help. Learn how to stretch with a partner to improve overall health in this fitness tutorial. When stretching with a partner you should push or pull, use gentle resistance, engage muscles, exhale & pull, and hold each stretch for eight to 20 seconds. With this how to video you will be able to stretch more effectively with a partner.

How To: Strength train with overhead cable triceps extension

Overhead triceps extensions are an important part of strength training and weight lifting. This fitness HowTo video tutorial shows you the proper way to do overhead triceps extensions with a cable machine. Before staring stand with your feet steady on the ground, pull your elbows straight in front of you, extend and pull your arms apart. Keep watching to learn more about proper form for doing overhead extensions.

How To: Learn to use the push pull tool in Google SketchUp

Are you new to Google SketchUp? With the push pull tool, you'll be able to render any two dimensional shape into a three dimensional ojbect. Take a look at this instructional video and learn the basics on how to use the push pull tool in Google SketchUp. If you're concerned with the accuracy of your dimensions such as if you want an object to be approximately five feet in length or so, you can type in a value for it and it'll adjust accordingly.

How To: Weave crosses on a tennis racket

String a tennis racket yourself. Take a look at this instructional video and learn what to do and what not to do as you weave your crosses on your tennis racket. When pulling the strings across the mains, don't just pull it straight across. Always move your hand and the tennis string.

How To: Pull some college dorm room pranks

The college experience is just not complete without utter humiliation. These practical jokes are funny enough to bother pulling on friends, without being so mean as to lose the friends. Learn how to execute these tricks by watching this prank-making video tutorial. Use this as inspiration for one of your April Fools Day pranks!

How To: Prank the mouse click buttons

This is actually a really easy and fun prank to pull off. What it does is simply switch the right click on your mouse, to the left click, and switch the left click, to the right click. Confused yet? Follow these simple instructions to test it out yourself, and enjoy your victims reactions when they get this prank pulled on them, trust me, it's funny!

How To: Master the basic crochet steps

Start by making a loop around the needle. Next you grab the yarn string with the needle hook and pull it back through the loop. It should now be around the needle shaft. Do the same thing again, grab and pull through. When you have done as many as you want, turn the crochet around and put the needle through the last loop, grab the yarn and pull it through, ending up with two loops around the needle, grab the yarn and pull through both of the loops, you now have one loop on the shaft. Repeat u...