How To: Make bhindi ki subzi (okra curry)
Bhindi ki subzi is a traditional vegetable dish from India. Made with okra, curry and a wide array of traditional Indian spices this dish is healthy and a great addition to any meal.
Traditional Lighting Search Results
How To: Make traditional Italian pesto
A traditional Italian sauce, pesto contains fresh basil, parmesan cheese, garlic, and olive oil. Try it with pasta or in recipes. You will need basil, garlic, parmesan cheese, pinenuts and extra virgin olive oil. In place of the pinenuts you can substitute cashews or not use nuts at all. This sauce can be frozen in an air tight container.
How To: Shade a drawing with a second light source in Adobe Photoshop
Using a primary light source is easy enough, but adding a secondary light source can sometimes be a tricky technique in Adobe Photoshop. This tutorial goes over several lighting principles to create a second, dimmer light source for your artwork.
How To: Make a miniature baby bottle
In order to make a miniature baby doll bottle to be used in a dollhouse, you will need the following: orange paint, white paint, a paintbrush, and a light bulb from a string of white Christmas lights. The light bulb must be a standard light bulb. It can't be a replacement bulb, because it needs to be clear. The wires do not need to be removed.
How To: Make self-igniting spell incense
Krazyboytx shows viewers how to make self-igniting spell incense! First you need an incense burner and place your incense in this. You then light this mound and it will ignite itself. One should note that this soap is very thick but it will light. First, to make this incense you need to base which is just sawdust. Next, you can add mugwart in this, or whatever choice you would like to add. Next, you should add in some potassium nitrate or a common name for this is 'peter salt'. For a stronger...
How To: Wire a single pole light switch
Before working on any circuit in your house, make sure you turn the light off at the circuit breaker and then test it at the switch. Use 14-2 wire which has two insulated wires, a white and a black, and a bare copper wire which is used for grounding. First you run a 14-2 wire from the main circuit panel into the switch box. Then run a 14-2 wire from the switch to the light bulb. The black wire from the main circuit panel gets attached to one of the poles on the switch. The black from the 14-2...
How To: Use & adjust shutter speed
Have a passion for photography but know nothing about the basics? This video might be a great place to start on the topic of shutter speed. Shutter speed is the amount of time that the film, or your digital sensor, is exposed to the light. Whether it be outdoors, at night, or low indoor light, the shutter speed allows your camera to take a photograph with the correct amount of exposure in reference to how much light is readily available in your setting.
How To: Draw a stone angel in Photoshop
Stephanie Valentin teaches us how to draw a stone angel in Photoshop. You create a new document of 1100 x 200 pixels. You sketch the character with a black brush of 5 pixels and 100% of opacity on a new layer. Keep this layer of the whole painting process. Then create a new layer, filling the shape with a dark color. Use a hard brush of 25 pixels and 100% opacity. Create a new layer Light 1, apply large lights with a soft round brush of 20 pixels and 35% opacity. Apply a Gaussian blur of 8 pi...
How To: Do basic lighting corrections in Photoshop
In this video tutorial the instructor shows how to perform basic lighting corrections in Adobe Photoshop. The levels tool is the Photoshop's most used command which has many features to it. Its most basic function is as a lighting correction tool. In this video open an image and work on its adjustment layer so that you do not damage the original picture. Now choose the levels option by right clicking and it shows a pop up window which contains a histogram which shows the population of the col...
How To: Throw traditional boomerangs
Got a traditional boomerang lying around? Check this video out for a tutorial on how to throw a traditional boomerang the right and wrong way. Each step performed shows what's being done wrong and what's being done right, so be sure to watch this if you wish to improve your boomerang skills.
How To: Make LED and basic sink tube lightsabers
Have you become a Jedi in your Star Wars delusional mind? If so, break out of the the asylum with a Jedi lightsaber. Oh, but you don't have a lightsaber yet, okay. Well, this video tutorial will show you how to make a very inexpensive LED light saber with the most basic parts you could find. Novastar will shares his Jedi wisdom on LED light sabers, so pay attention, or you could never get out of that loony bin.
How To: Add lights and materials to models in Pro/DESKTOP
This CAD software tutorial shows you how to work with lights and materials in Pro/DESKTOP. This is an advanced tutorial that will show you how to add materials to a figure, add lighting, backgrounds and export the image. Rendering completed images is an important part of working in ProDESKTOP since it showcases your final products. Learn how to make your models good with lights and materials in this Pro/DESKTOP tutorial. This video is best viewed full screen.
How To: Replace fog lights
Replace those broken fog lights and accessory lights on your car to avoid wrecks and tickets with expert automotive tips in this free online car maintenance and repair video series.
How To: Choose the right light bulb for your home
This video tutorial shows different kind of light bulbs that can help change the effect of lighting in your home. Whether you want more flattering lighting or want to save money on energy, choosing the right kind of light bulb can make a big difference.
News: Microsoft's New Light Capture Tool Adds More Realistic Lighting to HoloLens & Mobile AR Apps
We're still weeks away from a probably HoloLens 2 release, but Microsoft's immersive computing team is still hard at work on other aspects of its "mixed reality" ecosystem.
How To: Add Better Lighting Effects to Portrait Mode Photos on Your iPhone
Apple first included a dual-lens camera onto its iPhone 7 Plus back in late-2016, yet not many developers besides Apple have harnessed the depth data that "Portrait" mode photos provide. A relatively new app is changing that, though, by using that depth information to let you add realistic-looking light sources to your photos.
How To: Turn on Google Pixel's 'Night Light' Function to Sleep Better
Blue light (like that from our smartphone) tricks the human brain into thinking it's still daytime, even if it's coming from something as small as a screen. So while you're playing around with your new Pixel or Pixel XL after dark, subconscious signals to be awake are preventing you from getting to sleep as early as you should.
How To: Dim the Light on Your PS4's DualShock Controller
It's late and dark, I'm playing Dying Light, and, admittedly, I'm a little creeped out. Working as a grown man's night-light, this is one instance where I actually appreciate the light bar on my PlayStation 4's DualShock controller. But outside of a few particular instances, I generally find it to be quite a nuisance.
How To: Get a great shot on black background with Canon EOS 7D
It is possible to get a beautiful shot on a simple black backdrop, and in this tutorial you will learn how to arrange your lighting to do just that. Using a Canon EOS 7D, you will be able to shoot a wonderfully poetic moment on black if you follow these simple techniques.
How To: Assemble a DayFlo-FX 3204 Softbox
This video is a tutorial on how to assemble a DayFlo-FX 3204 Softbox. The instructor begins the video by showing what the DayFlo case looks like before assembly. The first part installed are the diffuser panels, it is also noted that you must remove the protective film from the front panel. The instructor notes that there are holes drilled into each side of the fixture. The next step is to insert the fat tipped ends of the rod into the corner holes and install the rods into the top two corner...
How To: Perform "Tatta Adavu" in Indian Bharatanatyam dance
In Bharatanatyam, the word "Tatta" literally means "to tap". "Adavu" is translated as foot work, but "adavu" is not a presentation limited to usage of the the feet. Every single limb of the body is coordinated in a certain style. In this traditional Indian dance how to video, we are taught the Bharatanatyam way of leg tapping. This "adavu" involves only the use of legs unlike most other "adavus."
How To: Perform "Ardhamandala" in Indian Bharatanatyam dance
Bharatanatyam dance is an ancient, traditional dance from India. "Ardhamandala" is the most important and frequently used leg posture in Bharatanatyam. Learn how to perform this essential dance move with this Indian dance tutorial.
How To: Dance the basic steps of Irish dance
In this how to video learn the basics steps of Irish dancing. Learn this traditional dance with this step by step tutorial.
How To: Choose a good deer ambush spot & light a survival fire with steel
This survival video offers up two pieces of useful information: how to scout and choose a good location to hunt deer and how to use the Kodiak fire steel tool to light a fire. These two pieces go hand in hand when you're out in the wild looking for food and needing a way to cook it.
How To: Improve renders with Linear Workflow in Cinema 4D
Linear Workflow is automatically activated in new projects in Cinema 4D and is a feature to ensure that lighting falloff is rendered more accurately and realistically on light sources, textures and reflections. Greyscale Gorilla explains the concept in this demonstration video.
How To: Crush a head with special effects and use three-point lighting for a film
No matter how desperate they are for work, most actors will not let you crush their heads for your film. The potential for career development afterwards would be limited. This video will teach you how to crush a head with special effects for a film and then how to use three-point lighting to make your films look more professional.
Use the two types of launchers: light launchers and Beylaunchers in Beyblade
There are two basic types of launchers you can use to play Beyblade: light launchers and Beylaunchers. They are both effective but play rather differently, so watch this video for a rundown of the differences and different strategies for each launcher type.
How To: Create a purple and silver eye look for light brown and hazel eyes
Just as a cute A-line skirt looks good on your friend but somehow not so fetching on you, or a blaze looks like it was made to fit your shoulders whereas it looks baggy and untailored on your friend, eyeshadow colors look different on every girl depending on her eye color.
How To: Correctly expose your digital photographs and avoid burred images
There are four variables a digital photographer must keep in mind when shooting pictures to ensure correct exposure: ambient light, shutter speed, f-stop and ISO. Also, keep all your images crisp and sharp, even if you're shooting in a low-light setting.
How To: Create an anime billboard wth tiny lights in Adobe Photoshop
This tutorial takes one small piece of a cityscape and shows you how to replicate it. It focuses on recreating a light marquee featuring anime characters in motion. This tutorial walks you through the entire process of creating the image.
How To: Use a timing light to adjust the timing on a 1928 - 1931 Model A Ford
If you're lucky enough to own a 1928 - 1931 Model A Ford, you've got a piece of automotive history. You also probably know that they are infuriatingly hard to work on. This video will help alleviate your repair pains by showing you how to use a timing light to adjust the timing on your Model A Ford.
How To: Find the red skulls & destroy trucks in Lara Croft and the Guardian of Light
The action's in Level 2 of Lara Croft and the Guardian of Light this time, and the goal is to find all of the hidden red skulls and to destroy all of the trucks. If you get all of the red skulls, you can earn the "Seeing Red" achievement. Jack and Geoff from Achievement Hunters walk you through the process.
How To: Add 3-D parallel glowing lights to your Adobe project
Have you ever wondered how to create that 'whoosh' effect, created by including a set of thin, glowing parallel lines? This tutorial shows you precisely how to use anchor points and blending tools to create this 'light rib' effect.
How To: Hack an HTC Evo 4G phone to record video in the dark
Want to shoot video in low-light conditions with a HTC Evo 4G smartphone? Whether you're the owner of an HTC Evo 4G Android phone or just covet one, you're sure to enjoy this Evo owner's guide from HTC Evo Hacks, which presents a complete, step-by-step walkthrough of how to turn on the camera's built-in LEDs to illuminate subjects in less-than-ideal lighting conditions. For complete details, take a look!
How To: Create flickering lights in Blender in one step
Learn how to create a foreboding flickering light effect with just a single step when working in Blender. Whether you're new to the Blender Foundation's popular open-source 3D computer graphics application or are a seasoned digital artist merely on the lookout for new tips and tricks, you're sure to be well served by this free video software tutorial. For more information, including step-by-step instructions, take a look!
How To: Perform the "Drop Spark" Zippo lighter trick
In this clip, learn how to perform the Drop Spark with your Zippo. This trick requires a fast hand and practice but when you do master it, it's pretty cool. Basically, you will be dropping your lighter to spark it, so that it looks like you lit the flame effortlessly. Follow along and impress your friends the next time they ask for a light.
How To: Use textures in Light Kit 1.2 for Cinema 4D
Nick from Greyscale Gorilla shows you great techniques for getting professional quality textures in Cinema 4D. He also talks you through the update of HDRI Light Kit v. 1.1 to v. 1.1.
How To: Create a neon light text effect Photoshop CS3 or CS4
In this video tutorial, learn how to create a really beautiful, eye popping, neon light "magic effect". Brighten up your asthetic presentation with this cool Photoshop trick, originally found on this blog. This tutorial is constructed using Adobe Photoshop CS3, but please note: This trick does work with CS4, but yields sightly different results. One can download the font used in this tutorial, here.
How To: Make a bytelight from memory chips and a lamp
See how to make a bytelight from memory chips and a lamp with KipKay and MAKE Magazine! Find out how to make a high-tech mood light from a fluorescent lamp and a bunch of old memory chips! Kipkay loves his gadgets! This is perfect for mood lighting.
How To: Safely put up a real, live Christmas tree
Make sure this year’s live holiday Christmas tree is not only pretty, but safe, too. Here's how to safely put up a real, live Christmas tree. You will need: