Traditional Pieces Search Results

How To: Tie a Bumblebee knot

In this calming and useful video, JD of the Youtube knot-tying instructional channel Tying It All Together demonstrates the tying of an obscure knot called a Bumblebee knot, for which good instructions are apparently hard to come by. It is a pretty piece of knot-tying indeed.

How To: Trim a ceramic pot on a wheel

English pottery instructor Simon Leach has stepped out onto his lovely deck to teach us how to trim our ceramic pots on the wheel. His example piece is small cup or pot that begins the video as plain as vanilla and ends it as a wonderfully detailed piece after only 10 minutes or so of work.

How To: Convert video for your Sony PSP with help from cnet

The Sony PSP is one of the most useful little pieces of video game technology to hit the market in some time. It has pretty sweet graphics, can play music, and store some of your favorite videos. In this tutorial, the people from cnet will show you how to convert videos from your computer to play in your Sony PSP. Good luck and enjoy!

How To: Make a 3d pop up card

In this video tutorial, viewers learn how to make a 3D flower pop up card. The materials required for this are 5 pieces of paper, scissors and glue. Begin by folding the paper in half 3 times and then fold down the sides to a triangle. Now fold a bit of the triangle flap up to make a slimmer triangle. Then cut around the top with a half circle shape. When opened, it will be a flower shape. Cut one of the pedals off and decorate it. Make 7 more flowers and glue the points together. Now take a ...

How To: Make a wooden fingerboard kicker

In this how to video, you will learn how to create a finger board kicker from simple materials. You will need a saw, wood glue, an index card, and thin wood. First, draw three shapes. The top is a rectangle while the sides are triangles. Put glue on the top of the side pieces and place the top on. Glue the index card at the bottom of the kicker. You can also print a photo of a stop sign on a piece of paper with the index card under it and glue it to the kicker. Once you have done that, your f...

How To: Do a twisted cross stitch

Spice up your repertory of knitting stitches with the twisted cross stich demonstrated in this clever crafter's how-to. The stitch, though it might sound difficult, is much simpler than you would think and can be used anywhere a traditional cross stitch might be. Learn how to do twisted cross stitching with this free knitting lesson.

How To: Origami a rose petal or leaf

With this video guide, you'll learn how to make rose pedals and leaves from folded paper with origami, the traditional Japanese art of paper folding. For a step-by-step overview of the folding process, as well as to get started making your own paper leaves and petals, watch this free origami lesson.

How To: Cut up a chicken for saute

It is usually less expensive and fresher to purchase a whole chicken as opposed to pieces. In this two part tutorial, learn how to cut up a whole chicken for cooking with Rob Hinsley, head of Hospitality & Catering at Stoke on Trent College in the UK.

How To: Design an elegant iris arrangement for your home

This video shows step-by-step instructions on making an Iris flower arrangement in about four minutes. The flower arranger uses a simple, tall vase and places the flowers in individually. He also includes bamboo, which he cuts to different sizes, and long pieces of grass to add an oriental flare to the arrangement. He also shows you how to tie the pieces of grass together to make them look more clean and put together. The video is edited to run at four times its normal speed, so that you can ...

How To: Cut nested crown molding with a DEWALT miter saw

dewalttv teaches you how to cut nested crown molding with a DEWALT miter saw. The advantage of this position is that it doesn't require a bevel angle. The bottom of the molding should be placed against the fence. To cut the right piece, set the miter to 45 degrees to the left and make the cut. To cut the other piece, the left one, set the miter angle to 45 degrees to the right and cut. You are done. This technique is useful when you don't want to worry about setting up a level cut.

How To: Skin a pheasant for cooking

This video describes how to skin a pheasant to prepare it for cooking and get the most out of the meat. The presenter starts by making a cut longways along the breast bone of the pheasant. Once you make the small incision you can peel the skin and feathers off of the pheasant. The presenter indicates that the main areas of meat are the breast area and the thighs. Next is cutting along the bones into the chest cavity and separating the collar bone. Instead of "gutting" the pheasant, the presen...

How To: Craft duct tape fabric

You probably already know that duct tape is handy in a bind and is very versatile but did you ever think to make duct tape fabric? Find some fun colors or stick with the traditional silver, make your fabric and then the sky is the limit to fashion possibilities.

How To: Dance complex salsa patterns

Here is a series of hot and complex sexy salsa dance patterns. This is a more complicated salsa pattern. It is a very long pattern, so take it in strides and small bites. We have named the individual moves to help you piece the entire salsa combination together.

How To: Draw a complex room

Miandza teaches you how to draw a complex room. You will start with two rectangles, one smaller than the other. Also draw 3 perspective lines - one horizontal and two diagonal, meeting in the middle. After that, start creating objects and pieces of furniture. Also add walls, doors and windows, according to the perspective lines. Use a darker pencil when you're sure of the things you are drawing. Now you start working on details. Don't forget about the floor and ceiling and add details and obj...

How to Make Indian food: Shrimp curry

Shrimp curry is the perfect spicy dish to warm you up on those cold winter evenings. This traditional Indian meal is not difficult to make. Follow along with this video tutorial, and you will learn how to make yummy shrimp curry - step by step. This unique recipe serves approximately four people and is usually served with plain or fried rice. Enjoy!

How To: Remove bits and pieces of wallpaper

Here are instructions on removing wallpaper bits and pieces. You will need: a circular electric sander and a microfiber clothe. Simply place the microfiber clothe over the electric sander. Begin to move your way over and across the wall. Much as you would if you were painting; moving up and down and diagonally. Adjust the microfiber clothe as necessary - it may wiggle around as you glide across the wall. You will notice quite a dramatic difference after finishing. Doing this saves a lot of time.

How To: Turn your old t-shirt into a sexy racerback tank

Want to add a few new pieces to your closet for summer but don't have the cash? Look no further than your "clothes junk drawer". Recycle your old oversized tshirt and reconstruct it into a sexy racerback tank top with help from this DIY fashion tutorial. Get the look you want for zero!

How To: Make pizza dough

Who likes Pizza!?! Well, a pizza wouldn't be a pizza without the dough. It's the major piece of the pizza pie puzzle. Learn close-up how to make pizza dough from scratch with this video recipe tutorial. This Susan's Cooking School video demonstrates each step in the process of making a versatile yeast dough.

How To: Make an accordion photo album

Want to make a neat gift for a friend? In this Curbly video tutorial, steps are given on how to make an accordion style photo album without any glue or tape. Materials needed include: light to medium weight poster board (24x4.5"), a scoring tool & board, an Exacto knife, scissors, a hole punch, 0.25"x7.5" piece of elastic, and brad clips. Put photos of you, friends, and family on both sides of the accordion to make for a great keepsake.

How To: Dry brush wargame scenery and tabletop terrain

Wargame Terrain gives this little video series on dry brushing techniques for wargaming. In the first video, see how to dry brush your wargame scenery and tabletop terrain using dry brushing techniques that make your piece look very real. The second video continues the dry brushing technique for war game terrain and scenery pieces, while the third and final video finishes the process off. Your gameplay will never be the same with these realistic creations, just use these tips for epic battles...

How To: Collect dust and stay clean when drilling

Drilling is always a messy job. Some just drill and leave the mess behind to clean up later. Some require someone to stand next to them with a vacuum cleaner, sucking up the dust as they drill. But to eradicate the extra manpower, and to clean up your mess as you drill, try something a little simpler... a mere piece of paper.

How To: Make a Cow with Oshibori Origami

An oshibori is a Japanese wet hand towel. With an oshibori you can make all kinds of things, just like origami. Oshibori Origami is the latest Japanese craze sweeping the nation! Instead of paper, we're making origami from wet Japanese hand towels. Oshibori origami is easier than traditional origami, and more fun, too!

How To: Fancify your MySpace profile with div overlays

CSS div layers permit you to abandon the traditional MySpace layout by covering it up with a blank slate. Then you can create virtually anything you want to. You can add images, tables, Flash documents—most anything you can think of. For more information, and to get started using CSS div layers on your own MySpace profile, watch this helpful video guide.

How To: Create frilly bits on typography in Photoshop

There is an awesome typography design from Ginger Monkey Design called Compassion. What is really great about that design was how they mixed some "frilly bits" with the typeface to create an outstanding piece of work. This Photoshop tutorial will attempt to create a similar typography from scratch. If you like or need fancy artistically frilly looking text, check out this video and learn how to make your own.

How To: Model a stingray in Houdini 9

These two Houdini 9 lessons illustrate a valuable and efficient means of modeling an animated surface in a manner not generally considered. It provides an explanation of the advantages to this approach and compares it to a more traditional means of animating a surface. So watch the tutorial and learn how to animate a stingray in Houdini 9 using newer style animation methods.

How To: Simulate brick wall effects for dioramas

Here are some examples of brickwork for dioramas or war game terrain. Create a fine grit coating for foam carvings using a mixture of white glue, paint and fine sand. Press in brick patterns into foam, or if working in smaller scale, you can coat cardboard with a thin coat of plaster. Find old pieces of dry flat wood to create miniature slats of wood for sides of a barn or haunted house.

How To: Make a jeweled cuff-style bracelet

Eco...in this case also meaning 'economize' as we take an item that would normally have been thrown away & use it to make a cool fashion statement piece! This project is dedicated to the Green Guru Challenge and just uses household scraps headed for the trash, and turns them into a stylish bracelet. Learn how to craft this bejeweled cuff bracelet by watching this video jewelry-making tutorial.