Cute Girls Hairstyles demonstrates the art of creating a "fall through" French braid hairstyle for a young girl. The stylist demonstrates the procedure with a straight haired subject, but the technique can be applied with curly hair as well. Starting at the top, the process is done almost exactly like a standard French braid with a few key twists. The braiding is stylish and looks just different enough from a typical French braid style to draw plenty of attention and complements. Cute Girls H...
This video shows you how to remove the links from a metal watch band. This simple, five minute process will help you resize the band to fit your wrist. You can do it with simple household tools.
Looking to stick your winning game on your wall? In this two part tutorial, learn how to deflesh the skull and antlers of a deer and make it into what is commonly known as a Dry Skull, Desert, European, Texas, or Western Mount. Part one covers starting with the harvested animal, a typical plaque, discussing set-up and basic methods, the bone overview and the processes' start. Part two continues the defleshing of the skull base, tightening of the nasal bones, whitening, detailing, antler base ...
Transforming a plain old plate into a work of art is just a simple garnish away. Learn how to make edibile garnishes.
Hack into a TV to get more channels! Make this DIY antenna that will get you at least a dozen more channels. You need a fork, shoelace and an old metal desk lamp. This is way better and far cheaper than the ones you buy in the store.
Learn how to make an adjustable light stand. This adjustable telescoping light stand is cheap if you have all of the materials already, like a painter's pole, a metal table leg, scrap wood and some screws. This light stand is a good choice for film shoots on a low-budget. Who needs expensive light stands anyways?
Hi, welcome to this origami video! This origami video is a great tutorial on how to make a transforming shuriken(ninja disk).
A jigsaw can be used to cut wood timber, metal, and plastic. The jigsaw is a very versatile tool, and comes in an array of options that may or may not work for you. Watch this video home improvement tutorial and learn how to choose a jigsaw.
Depending on the job at hand, you're going to want to choose the right drill glue. There are different adhesives that will work better with metal, wood, glass, ceramic tile, or anything else you might need to bond, and that have different techniques for using. Watch this video home improvement tutorial and learn how to pick the right glue for the repair job at hand.
These guys started with a Honda Rebel junker and a dream - to make a practical, zero emissions vehicle for commuting.
Watch this instructional video on how to coat detail work around boxes and pipes with joint compound. Spackling drywall is a delicate art, but anyone can create a perfectly smooth surface with a metal putty knife and a fresh bucket of spackle. Learn how to lay dow thin coats of putty around details and box shapes to avoid heavy sanding in the second stage of prepping a room for painting.
Watch this instructional video on how to coat butt joints with joint compound. Spackling is a delicate art, but anyone can create a perfectly smooth surface with a metal putty knife and a fresh bucket of spackle. Rock the putty knife back and forth to coat a butt joint with joint compound. Once you are ready, try out to bonus trick for spackling masters.
This instructional video demonstrates how to coat ceilings with joint compound, without dripping mud on your face. Spackling is a delicate art, but anyone can create a perfectly smooth surface with a metal putty knife and a fresh bucket of joint compound. Spackling ceilings is one of the more difficult tasks in prepping a room for painting, but this video provides tips on how to lay down thin layers of putty to avoid heavy sanding after the spackle dries.
This is a video demonstration on how to coat cornerbeads with join compound. Spackling is a delicate art, but anyone can create a perfectly smooth surface with a metal putty knife and a bucket of fresh joint compound. Learn how to spackle a corner in thin coats to avoid heavy sanding in the second stage of prepping a room for painting.
Here's how to spot nails and screws with joint compound. This instructional video will show you how to coat nails and screw holes in drywall with a thin layer of spackle. Use a metal putty knife and fresh joint compound to get a smooth surface of spackle and avoid heavy sanding.
This shellfish how-to video demonstrates a simple technique for shucking Long Island Bay scallops. Although the entire scallop is edible most people only eat the muscle that holds the shell closed. To remove as much of that muscle as possible try to get the knife to scrape the top of the shell as you open the scallop. The typical Long Island bay scallop yields a meat about the height and diameter of a stack of 8 nickels. Some larger, some smaller, but that's about average. Follow along with t...
This metalsmithing video segment shows how to speed weave Byzantine chainmail.The Byzantine chain is a popular metal weave pattern for supple and flexible necklaces, bracelets, and other pieces of jewelry. This video assumes you know how to construct 2x2 chainmail units.
It's as easy as 2,3,4,5,6,7...what happened to step 1? This is Chthonic chainmail at its finest. This instructional metalsmithing video will help you in making your very own chain mail vest using a four in one European chainmail pattern. After going through the basic process of chainmailing a four in one pattern, you can troubleshoot to see how you can improve your metal working process.
This instructional metalsmithing video demonstrates how to knit the spiraling chainmail pattern. This spiral pattern is useful for some chain link bracelets and necklace forms. Don't forget to use a quality set of pliers to save your hands some trying metal bending work.
This instructional metalsmithing video demonstrates the basics of making chainmail. Making traditional chainmail is a long and involved process. First, you must spin the wire into a spool. Then you have to cut the coil into individual rings. Embark on the long process of closing and linking the metal rings.
Decks and patios are a major source of America's entertainment and relaxing enjoyment, but they can be hot in the summer sun. They can actually be dangerous if they reflect the sun's ultraviolet rays. And running your grill during a rainstorm that arrives the same time as your guests can be a real frustration. One answer is a sunroof over your patio or deck. If designed properly, a sunroof can cut the summer sun, but still allow winter sun rays to warm the house. The sunroof shown is a typica...
Watch this instructional blacksmithing video to forge different types of steel leaves. You can use these techniques to forge fence posts and other decorative metal designs. Forge steel leaves by hand or with an air hammer. Follow these clear instructions to begin the craft of metalsmithing and add a creative flare to your blacksmithing projects.
Watch this instructional blacksmithing video to forge three different types of steel scrolls. You can use these techniques to forge fence posts and other decorative metal designs. Follow these clear instructions to begin the craft of metalsmithing and add a creative flare to your blacksmithing projects.
Watch this instructional blacksmithing video to forge and sculpt a steel rose. This blacksmith demonstrates the techniques involved in making an ornamental metal rose as well as other organic shapes. Follow these clear instructions to begin the craft of metalsmithing and forge a decorative flower.
Watch this blacksmithing video to practice air hammer techniques on a 75 lb small air hammer. You can use this technique for many types of free form metal forging. Follow these clear instructions to begin the craft of metalsmithing and forge a useful tool.
This instructional blacksmithing video demonstrates how to hot split a bar of mild steel and drift it to a desired size and shape. Choose your chisel and blacksmithing hammer. You want to begin splitting and drifting your piece of steel when the metal is yellow hot.
Convert a Zoom h2 into a 4 track field recorder which cane record from 4 channels on a computer audio interface. You will need four 10 Kohm resistors, four 100 ohm resistors, two double pole switches, four RCA chassis parts, some wire, small screwdrivers, a wire cutter, a soldering iron, gaffa tape, and a drilling machine with a 6mm metal drill. Watch this video circuitry tutorial and learn how to modify a Zoom H2 into a 4 track field recorder.
Opening an iPod Nano 3rd generation is more difficult than previous models, because of the metal clips. You will need the specialty tool designed to pry open the iPod, before you can get the iPod open and remove the screws. Watch this video iPod tutorial and learn how to install an LCD screen into a third generation iPod Nano.
Check out this electronics tutorial video to learn how to open an iPod mini. Just insert the blue tool between the white plastic end-caps and metal edging. Removing the white end caps from the top and bottom of the iPod mini is necessary in order to access the iPod mini battery inside - watch as a technician shows you how this is done.
A great nail shape can be achieved with natural nails. To file without damaging the nail, never use a metal file and only ever file clean, unpolished nails. Watch this video manicure tutorial from nail artist Anna and learn how to properly file your nails.
Check out this step by step instructional video to learn how to make a Cosplay Sword from cardboard and wood! Make sure you have all of the following materials to start making your Cosplay sword: spray paint, hard cardboard, wooden dowel, bendable metal wire, silver colored tape, embellishment, super glue, hand saw, paper clay, masking tape, scrap papers, pen knife, and a PVC pipe. Watch this Cosplay video and enhance your role playing with this tutorial!
This tutorial will show you how to draw a chrome rim. Watch this step by step instructional video to draw chromium surfaces with just a few pencils. It helps to draw from a photograph to better understand the way that light hits metal.
In this tutorial from the Scrollsaw Workshop, Steve Good will teach you how to cut metal with a DIY cutting jig. Learn the basics of metalwork with a scrollsaw while Steve walks you through making jewelry from U.S. coins. Take a look!
Installing clean, reliable, inflation-proof solar power is easier than ever thanks to the invention of thin-film photovoltaic (PV) laminates that can be bonded directly onto metal roofing panels. Unlike crystalline PV material, there's no need for obtrusive racks and heavy, expensive glass. Instead, unbreakable thin-film PV is produced using amorphous silicon, encapsulated in Teflon and other polymers. Watch this video to learn how to install PV laminates on your own roof.
This instructional video provides examples various supplies for war game terrain and diorama making. Most of these supplies for miniatures can be found at a local dollar store. Look for cardboard tubes, plastic sheeting, high density foam, metal foils and wires, plaster, sand twigs and other found materials.
This is the first Learn With Me Show hosted by Vivien. This Valentine's Day Special Show teaches you how to make a pretty Ribbon Rose. All you need are some nice wide ribbons, some metal wire, some green sticky tapes and a pair of scissors.
Falafel is a fried ball or patty made from spiced fava beans and/or chickpeas. It is a popular form of fast food in the Middle East, where it is also served as a mezze (snack or tapas). Falafel is usually served as a sandwich wrapped in pita bread, and outside the Middle East, the term "falafel" commonly refers to this sandwich—falafel in a pita is typical street food or fast food. Along with the falafel balls, which may be crushed onto the bread or added whole, topping variations are usually...
Ever feel like you don't have enough hands? Build a third one! You will need a 3 foot aluminum rod, a piece of 2 inch by 4 inch wood, a 25 pack of 1/8 in by 2 inch toggle bolts, #6 by 1/2 inch metal screws, an electric drill, drill bits, 14 inch cable ties, and a hacksaw or chop saw. Watch this video tutorial and learn how to build an animatronic robot hand.
This video origami tutorial shows how to branch out with material. Don't throw that yogurt lid into the trash, fold it into a fighter plane. Watch this instructional video and learn how to fold a metal yogurt lid into an origami plane.
Copper wire scorpion sculpture is designed by Daniel Burke of Torrington, Wyoming USA. He uses metal wire sculpture to bend this arachnid art.