Typical Metal Search Results

How To: Install a foot throttle on your lawn tractor

In this tutorial, we learn how to install a foot throttle on your lawn tractor. First, weld the petal onto the base and create your own holder for the rod so it stays in position. You will have to bolt it down so it stays in place and doesn't move. On the other side, put a holder on it so the rod stays in place and doesn't move. There should be a bolt on it so it doesn't move and a clamp that is welded onto the end of it. The, string a thin metal wire to connect onto the end and bolt it onto ...

How To: Make a holiday wreath on a budget

In this tutorial, we learn how to make a holiday wreath on a budget. You will need: branches, round wire frame, Next, buy some holiday flowers, and ribbon. First, start to arrange your branches with some wire and mix different types of branches together. After this, start to add in the flowers and some holly to the branches as well. Tie these tight in different bunches so that you have a more secure bundle. After this, start to wrap them around the round metal frame that you have, then situat...

How To: Clean black suede shoes

In this tutorial, we learn how to clean black suede shoes. First, remove all the dirty from the shoes. After this, spray on a lot of shampoo to the shoes, then brush with a suede shoe brush. After this, use black suede dye and spray it all over the entire shoe. Make sure you have plenty of color, so your shoes don't turn out different colors. To finish this up, use a rag to clean off the metal parts on the shoe, then you will be ready to wear them! This method only takes a few minutes and wil...

How To: Make a tightrope walking magnet

In this how to video, you will learn how to make a tight rope walking magnet. You will need a power supply with currents between 15 to 25 amps. A thick wire from a half to one centimeter is also needed for the tight rope. A small neodymium magnet will also be required. String the wire from one end to another. Place the magnet at one end. Use a pair of pliers and a piece of metal as a switch to run the current through the wire. Once that is done, the magnet should go down the wire. A magnetic ...

How To: Clean the trackball on a BlackBerry Bold cell phone

This video instructs you on how to clean the trackball on the Blackberry Bold 9000. Begin by turning off your Blackberry and removing the battery. Using a torque T5 screwdriver, remove the 6 screws around the edge that hold on the cover. Remember that doing this will void your warranty. Once the cover is removed, use your screwdriver to lift off the circuit board. Be aware that the USB port can get stuck. If that happens just push the port down slightly and you should be able to remove the ci...

How To: Install gutter guards for less mess

In this tutorial, we learn how to install a gutter guard. First, clean out your gutters of any rocks or leaves that may be inside of them. Next, gran the gutter guard and place it between your roof and the gutter. Gutter guard is a mesh type of metal that is flexible and easy to use. Now, take your gutter guard and place it on a long and thin piece of wood so it gets to be the same shape as the wood. Now, take the gutter guard and place it into your gutter. This is a great way to keep your gu...

How To: Use crimping pliers

In this video arsbeadsvideos instructs you on the use of crimping pliers, crimp tubes and how to use crimp covers. Make sure you use jewelry wire that is fine enough to fit through the holes in your jewelry. On your crimping pliers you'll notice there are two notches, also called stations. The first notch is furthest from tip of the pliers and has a raised bump or dimple in the middle. This helps to created figure-eight crimps. The second notch is used to form the crimp into a tube shape. To ...

How To: Put a spare tire on your car when you get a flat

Graham from TV Lesson explains how to change a tire. In most cars, the spare tire is located in the trunk, along with the jack and tools. First, look under the car and locate the folded pieces of metal to find the jack point. Raise up the jack a bit and slide it under the jack point. Next, using the lug wrench, break the torque on the lug nuts. Then, jack up the car. Once the car is jacked up, remove the lug nuts. Next, remove the flat tire and place it into the trunk of the car. Place the do...

How To: Practice skateboarding safety

Whether you’re headed for a half-pipe or your driveway, always be safe. Wearing protective gear and taking a few precautions can help prevent you from landing in the ER. Watch this video to learn how to practice skateboarding safety.

How To: Clean a crockpot

Over time, stains can collect in your crockpot. Learn how to properly clean your crockpot and remove stubborn mineral stains and water marks. When cleaning the crockpot, fill it with hot, soapy water once the cooker has cooled. Let it soak for 15 to 20 minutes, then scrub with a cloth, nylon pad, or plastic sponge. Do not use harsh cleaners or metal pads. Rinse well in hot water and dry.

How To: Reduce Browning in Avocados & Other Fruits by Switching Your Knives

Keeping apples or avocados from browning after being cut is impossible; within minutes of being exposed to air, these fruits (yes, avocado is a fruit) begin to brown. No matter what you try—adding lemon juice, keeping the pits in place, immediately sealing the produce in an airtight bag—brown discoloration always occurs. However, air is not the only reason that foods like apples, avocados, and lettuce brown: it's also due to the knife you're using.

How To: Thaw a Frozen Steak in Minutes

It's a basic law of cooking: whenever you're really craving something, you don't have it. All you want is a glass of wine? Chances are you finished the bottle while braising meat last night. Want nothing more than a sandwich right now? Yep, you finished the bread with breakfast. You'd kill for a steak? They're all in the freezer, and you don't want to wait while they thaw; you want your steak now.

How To: Hang a Christmas Wreath Without Damaging Your Door

Whether you choose to hang an authentic or artificial pine Christmas wreath on your door — or an entirely different type, like ones made of paper waste or even food — chances are you've spent a year or two struggling with how to keep your decor hanging. With one easy to apply, quick to remove trick, you can skip the shiny wreath holder and any further damage to your front door.

How To: Demon Hand Armor Tutorial (Video)

Here's my latest armor tutorial...what I call the "Demon Hand". The method used in this tutorial can be used to create pretty much any armor. This one is is 18 gauge brass, but if you use stainless steel I suggest 20 or 22 gauge. This is the easiest of all of my gauntlets to create, and it takes a lot less metal. Less than an 8.5" x 11" piece (per hand). Would make cool motorcycle riding gloves!

Spiderbrella: How to Turn an Old Umbrella into a Man-Eating Spider

Spiders are my least favorite thing in the world. My second least favorite thing are cheap umbrellas. So, it's only fitting that the two work perfectly together as a creepy Halloween prop. In my video below, you'll see how to make a Spiderbrella, which is just the inside metal skeleton from the umbrella (which looks like a crawling spider), the umbrella's original black fabric, a couple Styrofoam balls, and some floral wire.

How To: Make an Iron Man Inspired Gauntlet (in Metal)

Here's my latest gauntlet, made in 22 gauge stainless steel using ordinary hand tools you probably already have in your garage. I used Iron Man for inspiration, but it's far from an exact replica. Unlike my previous gauntlets, there is minimal riveting, as most of the parts are held to the glove using epoxy, along with some small nuts and bolts. Aside from cutting out all the parts, which is a little tedious, it's actually fairly easy to do. A fun project for anyone into metalworking, prop ma...

How To: The Nuts and Bolts of Steampunk: Using the Right Screws for the Job

Let me start out by saying that Steampunk isn't about being historically accurate, and that everything I'm about to tell you is entirely optional. That said, let's take a look at the history of screws! What many people don't realize is that before we had metal screws, wooden screws were in wide use for things like wine and oil presses. Generally, the invention of the screw is attributed to Archimedes in the 3rd century BC. That was a long, long time ago. Metal screws and even screwdrivers hav...

How To: DIY Decapitated Head Drinking Fountain: The Perfect Way to Serve Blood-Red Punch on Halloween

Costume parties are in full effect this weekend, so with that said, how cool would this look at your Halloween party? Instructables user castor009 made two holes in the head (one for inserting the PVC tube, the other where the liquid will spew out) and insert the pipe and tubing, then stuffed it to secure everything. He then fit the bottom tubing through a pencil holder and attached it to a water pump. Then just add whatever you want to serve at the party (I would suggest anything red or blac...

How To: Make Toast Cooler by Modding a VHS Player into a Working Toaster

Toasters can do so much more than toast bread. A toaster oven can make your Halloween jack-o'-lanterns look pretty creepy, and you can even mod one into a reflow oven. But what about a regular ol' toaster? Well, you can turn one into a working NES console—or you can keep its bread-toasting functionality by just making it look cooler, like Instructables user lemonie did with his VHS player toaster mod.

How To: Solving for "x" using multiplication and division

Solving for "x" using multiplication and divisionHere is a typical algebraic equation "2x=12". Multiplication in algebra will have the "x" next to a number. The process will be a combination of multiplication and division to solve for "x". To get "x" alone, we do the opposite operation. 2x/2=12/2. Bring down the "=". You must balance the equation to make sure you did the computation correctly. 2x6=12. Next, we have a multiplication and addition problem. 4x+7=15. We must get rid of the 7. +7-7...

Walkthrough Assassin's Creed 2: Mission 58

Cheaters Never Prosper: But they do get quite a reputation. This is a simple mission. You need to just fight off the opponents that come at you using your bare hands. Even though you've no weapon equipped, you can still use the typical counter ability. Though you won't always KO an opponent with the first counter, repeatedly make use of the technique and you'll eventually drop the opponent.

How To: Hold a dinner conversation with Japanese etiquette

This video language lesson explains how to hold polite dinner conversation in Japanese, focusing on traditional Japanese table etiquette. At the beginning of a meal, a typical thing to hear is "itadakimasu". Translated literally, it means, "I will partake." When finished with a meal, everyone says, "gochiso-sama", which is a way of expressing respect for the meal. The names of the utensils used in a Japanese meal are "hashi" (chopsticks), spoon (same as in English) and "foh-ku" (fork), "coppu...

How To: Make foolproof filet mignon

In this video, Chris Kimball of America's Test Kitchen appears on CBS to show us how to make full proof pepper-crusted fillet mignon. America's Test Kitchen made this recipe 40 or 50 times to make sure it's the perfect recipe. You can start with an entire tenderloin and cut out the center cut, which is preferred or you can buy them in the supermarket pre-cut. Next, take 5 tablespoons of peppercorns and crush them with the bottom of a saucepan. This makes it easier to coat the meat. Cook the p...

How To: Detect the symptoms of postpartum depression

It's not unusual to feel a little down after giving birth. You've been through a major life event, and your mind and body are recovering. Postpartum depression is more serious than the typical “baby blues” that can occur after childbirth. Learn how to identify this condition so you can treat it and spend more time enjoying your baby.