Squirrelod shows you how to put together a shock assembly or a shock absorber on a Factory Team remote control car kit. He takes us through building the piston - shaft, dampener, nuts and over rings step by step. Practical tips and tricks involved in building up the shaft and the recommended oil used are presented. This is not something that should be done in a hurry since time is needed to let the oil settle thus removing any air bubbles in the piston. Although the instructions for different...
In this how to video, you will learn how to install and replace the glow plug in your RC car. Glow plugs are used to ignite the fuel in the engine. A glow ignition makes the filament in the plug red hot. To check if the glow plug works, place it on the ignition and check if the filament is bright red. This is very easy, as you just need a 4 way wrench. Slide it in the engine and take the glow plug out by spinning the wrench counter clockwise. Once this is done, place the new glow plug in and ...
The placement of your battery on a crawler RC can be a pretty important task that you need to know. This video tutorial gives you a detailed explanation of where to place your battery and how to msximize the performance of your vehicle. Enjoy!
Eddie Newman explains how to throw a cast net in to a body of water in order to catch fish. His process is to first put the rope on your right hand attaching it to your wrist, then gather up the rope in your hand, grab the top of the net, then wrap the top of the net around your hand so that you are holding it about a foot down. Then grab the weights and lay them in your fingers, you are now ready to throw. Put the net on your right side and throw, your right hand should cross over your left ...
To make your very own Spartan Spear, like in the movie 300, you just have to follow a few short, easy instructions. Start off by taking a broom stick, and cutting off the end. Make sure your broom stick is empty inside. Then take a hammer and flatten the last few inches of it, hammering it into a point or a flat blade at the end. Cut off part of the tip at an angle on either side, then open it back up with pliers. A few inches below the opening, take your pliers and press in on the broom stic...
This video in the Fitness category will show you how to do squats correctly. This exercise is meant for the legs. The easiest way to do this is to sit down and stand up using a bench. The bench should be about knee height. Technically the line from the ankle to the knee and the line from the hip to the shoulder should be parallel as you go up and down. The legs should be about one and a half feet apart. This is the body weight squat. As you progress, you can do the dumbbell squat. The video ...
This video tutorial shows you how to use a long wrap product to dress yourself while creating a secure carrier for your baby. The long wrap is brought forward from back to front and round your belly button, criss-crossed over your back and brought forward and criss-crossed once more, then tied. The two criss-crosses (in the shape of an X) help hold the babies legs, as the pass through the criss-crosses and support the baby. You should then try to bring the fabric down as far as possible to su...
Properly measure liquid and dry ingredients Diane Morgan describes the basic technique for measuring ingredients, which is critical to baking. There are two types of measuring cups, one for liquids and a different type for dry ingredients that need to be leveled off, such as flour or sugar.
So you want to waterproof an RC vehicle, eh? I like the way you think. In this four-part video, you'll learn everything you'll need to know to transform your remote-control car into a submarine car. The first video in the series demonstrates how to waterproof a servo, the next how to waterproof a speed controller and the third demonstrates how to waterproof your receiver. The fourth, and final, clip from the series demonstrates a waterproof RC car in action.
ApprenticeA teaches you how to moonwalk like Michael Jackson. Learn how to do some of Michael Jackson's classic moves as seen in many videos. Firstly, practice the moonwalk by standing still and then do it sliding across the stage. The moonwalk consists of sliding your foot backwards while always keeping one foot pointed and applying weight to it. You are taught the moves slowly at first and then in real time. You get a nice break in between the moves to practice and catch up with your instru...
Welcome to a tennis lesson from FuzzyYellowBalls, the the best place to learn how to play tennis online. Our free video tennis lessons teach you how to play the game in a new way that combines technical analysis, visual learning, and step-by-step progressions.
Go beyond the traditional 3D workflow to an immersive creative experience with the software Modo, created by Luxology. Modo is the next evolution of 3D modeling, painting and rendering for Mac and PC. Modo includes 3D sculpting tools, animation and network rendering, and advanced features such as n-gons and edge weighting.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
If you're confused in life and completely bored, then it's probably about time you picked up a yo-yo. A yo-yo is a toy that consists of a pair of jointed discs with a large, deep groove between them, where a string is attached and wound, that can be spun alternately downward and upward by its weight and momentum as the string unwinds and rewinds.
Check out this five-part video tutorial on how to use fiberglass finish over balsa wood for RC airplanes. If you like building engines and bodies for remote-controlled vehicles (airplanes), then this will definitely help you out, just by learning how to apply simple fiberglass to the balsa wood parts of the RC airplane body. You will learn all of the tricks needed for fiberglassing.
BMX: Catch Some Air If Ernest Michaux, inventor of the modern bicycle, could see what people are doing with his creation, he'd freak out. The art of creative biking has never been more challenging and rewarding than it is now. Check out the tricks for a guide to BMX mayhem. Watch this video tutorial to see how to perform a wall tap on a BMX bicycle.
BMX: Catch Some Air If Ernest Michaux, inventor of the modern bicycle, could see what people are doing with his creation, he'd freak out. The art of creative biking has never been more challenging and rewarding than it is now. Check out the tricks for a guide to BMX mayhem. Watch this video tutorial to see how to perform a feeble grind on a BMX bicycle.
Surfing: Hang Ten The ocean is a force of nature that refuses any effort to tame it. To throw one's self on the mercy of this beast is a courageous act. With the help of this trick guide, you can learn to harness that power and push your water-borne adventures to new heights. See how to
Watch this three-part series on how to assemble battery cells for your radio controlled vehicle. First, see what is needed to assemble cells and to get them glued.
It's sometimes possible to recognize when you've recently contracted HIV from signs and symptoms such as fever, rash, or swollen lymph nodes. This video will teach you how to recognize signs and symptoms of primary HIV infection that are experienced by between 40 and 90% of individuals after they are first infected with HIV. Primary HIV infection occurs during the first few weeks or months after a person first becomes infected with HIV. Symptoms include rash and/or fevers, possibly in combina...
If you call yourself a hobbyist or a kid at heart, you know that remote-controlled vehicles are more than just fun. If you're a serious R/C man, you'll know all about doing everything to your model truck or car, like fixing wheels, vamping the pinion gears, waterproofing, troubleshooting, electronic diagnostics, setting up, programming and finally... racing. As much as you know about these remote-controlled vehicles, it will never be enough, you'll always be looking for more...
Chris Chianelli talks a bit about nitro engines and using the main needle valve. Without knowledge of the vehicle's engine, you won't be able to use the RC vehicle to the max. Watch this video tutorial and learn the inner-workings of an RC vehicle engine.
If your car is starting to ride like a boat you may have a broken stabilizer bar, also known as a sway bar. The good news is that you can replace the sway bar and get your car running smoothly again. Watch this video and learn how to replace the stabilizer bar on almost any GM vehicle.
This is a short tutorial that shows you how you can execute a perfect drift when playing Gran Turismo 4. This tutorial uses the Nissan S14 Silvia as a demonstration vehicle. Remember, when you're trying to drift, it's all in the timing.
A lot of people seem to have idle problems in their Honda vehicles, especially the Integra models. And idling problems are really hard to pinpoint. But you're in luck, because Eric has some great tips for hunting down those engine idling problems and eradicating them for good! Some of these tips include bleeding a cooling system, checking for vacuum leaks, reading the check engine light codes and diagnosing overheating.
In this driver's guide, we learn how to take some of the stress out of driving an RV. With a few simple techniques, you'll find it's easy. For all of the relevant details, and to get started learning more about RV driving yourself, just take a look.
Having properly functioning wheel bearings is important on any wheeled vehicle. If your old Ford Windstar is needs new bearings and you feel up to replacing them yourself, watch this video. It will teach you everything you need to know to change your own front wheel bearings.
The Chevy Tahoe isn't the most reliable vehicle, bless it's heart, and home maintenance skills are a must if you're going to enjoy owning one. If you're replaced the rear brake backing plates recently and noticed the E-brake not working after that, watch this video to learn whether you lost the pin under the adjuster pad and that's causing the problem.
The fuel trim in your car is the mixture of air and fuel in the engine, which needs to remain in balance for an engine to run properly. This video will teach you about how to assess the fuel trim on your vehicle and adjust it.
If you need to replace your valve body on your transmission, this video tutorial will show you how simple it is to do yourself. This focuses specifically on the valve body replacement of the Toyota A750E or A750F model transmission, and can also be applied to the AB60E or AB60F transmission, which can be found in vehicles like the Tundra, FJ Cruiser, 4Runner, Sequoia, and more.
A common problem for an LLV postal truck is a transmission fluid leak at the speedometer drive gear on the side of the transmission. This video will show you how to repair this transmission leak at the seal. LLV stands for the Grumman Long Life Vehicle, which the United States Postal Service (USPS) for all mail delivery. More than likely, it's an O-ring problem (speedo seal) where the speedometer cable attaches.
A frequent repair on the Grumman Long Life Vehicle (LLV) is changing out the window regulator on the side door of the postal truck. The United States Postal Service (USPS) uses these trucks for mail delivery, so the window regulator goes through a lot of use. The first thing to do on this repair is take the door off. Watch the video to find out the whole procedure.
The United States Postal Service (USPS) use what's called a Grumman Long Life Vehicle, or LLV, for their postal trucks. This video will show you how to troubleshoot the dash gauges in an LLV that are acting crazy. If you;re a mechanic and you have the same sort of electrical problem with the gauges when using turn signals or hazards, this video will help you find the solution, which could involve the parking brake.