Water Meter Search Results

How To: Create water loops in five steps in Minecraft

While building your fortress in Minecraft you might have thought about doing some work with water. Sure, you could just build a moat, but what's cooler than making your own water loops!? Line them up with each other and watch them cycle water among one another in a very cool way! In this video you will get a quick five step tutorial on how to create one of the coolest things in Minecraft!

How To: Dye yarn with Kool-Aid

In this video, we learn how to dye yarn with Kool-Aid. First, take two chairs and wrap yarn around them as tight as possible to keep them from getting tangled up. Then, place in a bath of lukewarm water for ten minutes. After this, grab packets of Kool Aid the color you want your yarn to be. Now, take the yarn out of the water and squeeze out any excess water. After this, mix up the Kool Aid and place it into individual jars for each color. Next, place the jars in a large pot of water and the...

How To: Protect your basement from water

Protecting your home from water sounds like an easy enough task. It's only water, right? Well wait long enough and you'll find out that water always wins. Whether it builds up in your walls or in your basement, some sort of damage will arise due to the wet substance. But there are ways to hold back the water in order to protect the very space you live in.

How To: Get rid of hiccups by drinking water upside down

There are a million suggestions for how to get rid of your hiccups but the most effective seem to involve drinking water. You don’t have to do a headstand or hang from the rafters. All you have to do is lean over to simulate being upside down and drinking some water. This video will demonstrate very clearly how to drink water upside down to get rid of your hiccups and this one really does work.

How To: Locate water in a dry desert water bed

When trying to locate water in a dry desert look around to see if there are any disingenuous trees since these trees are usually near lakes and falls. Once you have located one find a low spot or a damp area near the tree. Using a stick or another tool available dig a hole into the area until you find water. Make sure to keep the edges of the hole your digging nice and round so that the hole won't fall in on it self. When you've found water it should flow into the hole. The water is usable so...

How To: Calculate the circumference of a circle

This video shows how to calculate the circumference of a given circle. The video first describes the circumference or perimeter of a circle as the distance around the outside of a circle. To find the circumference we need either the radius or the diameter of the circle. When you know the diameter of the circle, the formula to find the circumference denoted by 'C' is 'pi' times the diameter, where 'd' is the diameter and 'pi' is a constant, the approximate value being 3.14. And when you are gi...

How To: Design your own clothes & mix dye your clothes

Eddie teaches the secrets of designing your own clothes & mix dying your clothes. First mix together 1 tablespoon golden yellow, 1/2 teaspoon sunshine orange, 1/2 cup salt and 4 cups of hot water. Dip a piece of cloth to check the color, add more dye to make it darker or some water to make it lighter. Pour the dye solution in a big container with water, add some detergent and batter to mix the dye well. Put you plain shirt in hot water for sometime, squeeze it out and put it in the container ...

How To: Draw a cup of water with a straw inside

This video is about how to draw a cup of water with a straw inside. For this you have to remember only a very few easy steps:(1) Draw the sides of the cup.(2) Draw an oval for the bottom.(3) Add an oval for the top and draw some water. (4)Then draw a straw. Your cup of water with a straw inside is ready in just a very few simple steps.

How To: Maintain a swimming pool with Lowe's

Lowe's home improvement expert Mike Craft gives the low down on how to maintain your swimming pool. Pool maintenance is essential for keeping your pool like new and in tip-top condition. You will need some basic materials such as water test strips, chlorine tablets, algae-cide, water shock, a skimmer brush, pool net and vacuum. This video will show you how to balance your water, shock the water, clean out the filters and sweep and vacuum out your pool.

How To: Do colorful electrolysis

No, colorful electrolysis has got nothing to do with zapping the hair off of a punk rocker's head. Electrolysis of water, according to Wikipedia, is "the decomposition of water (H2O) into oxygen (O2) and hydrogen gas (H2) due to an electric current being passed through the water." In this video, you'll watch in amazement as a young scientist colorful electrolysis to transform ordinary water into a psychedelic display.

How To: Cross wake on water skis

Learning to cross the boat wake on water skis can be difficult and scary but is also very fun. Learn how to cross the wake on water skis in this water skiing video lesson. Take action: keep knees bent and arms straight, focus on boat, and pay attention to direction. Paul, the instructor in this how-to video from Live Strong, is a current member of the Canadian National Barefoot Water Skiing Team. He also teaches bare footing in Florida. He lives, eats, and breathes the sport. A native of Toro...

How To: Build your own rain barrel

In this video tutorial, you'll find instructions on how to build your own barrel as well as learn about the benefits of water of conservation. Rain barrels reduce storm water runoff, provides healthy water for your plants, conserves water and, of course, to the extent that you don't pay for it, will help you to save money. For more, or to get started building your own rain barrel, watch this DIY video guide.

How To: Create solid water for miniature dioramas and models

You can paint your plaster blue and coat it with a gloss, but there are easier ways to make artificial water for miniature dioramas, architectural models and war game terrain. Easy Water is a product made up of small plastic pellets that need to be melted and poured onto the model. You cannot use this on styrofoam, obviously. This instructional video provides some alternative methods for creating water effects on miniature dioramas.

How To: Boil water at room temperature in a vacuum

This is a super cool way to learn some science while combating spring break or summer break boredom. This science video teaches you how to boil water at room temperature. Obviously this won't work in the normal conditions in which you boil water. But if you place the water in a vacuum, where the atmospheric vapor pressure is lowered, water can boil at a much lower temperature.

How To: Hack a Candy Machine with a Paper Coin

Craving candy but have no change? Then listen closely to this hack. This con how-to video shows you how to hack a candy machine by creating fake quarters. This hack trick should also work on parking meters. Never pay for candy or meters again. Watch this video tutorial on YouTube and learn how to hack a candy machine with a paper coin or cardboard.

How To: Animate a bully splashing a water bottle in Adobe Flash

This tutorial shows you start to finish how to draw an image of a bully with a water bottle in hand and then fling that water bottle onto someone else using FL Studio. This a useful reference piece for trying to animate splashing water or similar water physics. It's not precisely hard to do, but you'll want to pay attention to some of the detail in each piece. Also make sure that you have the most current version of FL Studio installed!

How To: Install a vanity and sink with Lowe's

In this video, we learn how to install a vanity and sink with Lowe's. A great way to give your bathroom a makeover is to give it a new vanity and sink. First, turn off the water from the water line, then take down the pipes from under the sink. Use a bucket to catch extra water that's falling out. Next, separate the top from the base and then remove the old vanity. Remove the old base unit from the bathroom and then install the new vanity. Measure out the area to make sure it will fit. Place ...

How To: Get a coin out of water without getting wet

In this tutorial, we learn how to get a coin out of water without getting wet. First, place the coin inside of water on a plate. Next, use a lighter to light a piece of paper on fire, then place the paper inside the water cup and let it smoke and burn. Next, push the cup down onto the plate, and it will soak up all the water that was on the plate! Then, your penny will be dry and you can pick it up without getting wet! This is a great trick to show your friends and works easily without any pr...

How To: Make non-Newtonian slime mixing cornflour and water

In this tutorial, we learn how to make slime by mixing corn flour and water. To start, you will need corn flour, water, and two plastic containers. First, pour the corn flour into one plastic container and then add in some water with food coloring to the mix. After this, mix the combination together until it makes a paste. Add more water or corn flour as you mix. When finished, grasp the mix in your hands and it will start to turn into slime! You can color this with any color food coloring, b...

How To: Save energy by installing a solar water heater

Saving energy in your home is as easy as pie. There are many areas of the home that you can tackle. One area that can be helpful is the water heater. There are a couple of water heaters that you can use to not only save energy but money. One way is by using an active or passive solar water heating system.

How To: Make your own Florida water for spells

Krazyboytx shows viewers how to make Florida Water! You do not have to have every single oil listed if you cannot find the oils in this recipe. Also, make sure you add something of yours also! Make your Florida water personal. First you will need 2 cups of vodka, 2 tablespoons of rose water, 16 drops of bergamot oil, 12 drops lavender oil, 6 drops mai chang oil, 3 drops rosemary, 2 drops Jasmine and your own oil! First pour your vodka into a large mixing bowl. Next, mix in your oils! Stir the...

How To: Do a sodium and water experiment

In this video tutorial, viewers learn how to do a sodium and water experiment. Sodium is a silver metal that is very reactive. When exposed oxygen in the air, an outer coding of sodium oxide will form. Simply drop a piece of sodium into a cup of water. When dropped in water, sodium reacts to form sodium hydroxide and hydrogen gas. The sodium will constant move around in the water. Sometimes the heated reaction will cause the nitrogen gas to ignite. Under the right condition, it may even cause...

How To: Use plastic row covers & wall of water for plants

This video demonstrates how to use plastic row covers and wall of water to start plants early. A lot of gardeners want to start their planting early if the weather is nice. But they may be subject to some frost still yet. How can they protect their plants? First is a demonstration of how to use a spun bond polyester like material. It is breathable, rather than using clear plastic, so the plants don't cook on warmer days. Then the video shows how to use a wall of water to start a few plants ea...

How To: Use a trash bag to supplement water in the desert

This video is about how to supplement water in the desert using a trash bag. You find a tree that is edible and not poisonous and you open the trash bag and place it over a few of the branches with leaves and seal the opening off. Then you take a little cord and tie off the corner of the bag and find something heavy to weigh the branch down. You want to make sure the corner of the bag is down so that all of the water will run down to that corner. When you feel some water in the bag you can cu...

How To: Make slime, flubber, or goob for kids

This video shows you how to make slime, flubber or goop. Take two ounces of glue and one quarter cup of water. Pour the water into the glue and stir the mixture. Pour in a few drops of paint and keep stirring. The more paint you add, the darker it will be. Take one quarter teaspoon of borax and one quarter cup of warm water. Add the borax powder into the warm water and mix together to dissolve the borax. It is ok if not all the borax is dissolved. Pour the borax mixture into the glue mixture ...