West Rim Search Results

How To: Glue a tubular tire using Tufo rim tape

This video tutorial is in the Sports category where you will learn how to glue a tubular tire using Tufo rim tape. Gluing a tubular tire is very simple. You will need a tire, rim, Tufo rim tape, scissors and a pump. Stretch the tire with your foot and your hand as shown in the video and then inflate it. Take the Tufo rim tape, find the side labeled rim side, remove some protective foil and press the tape into the rim inching your way along the wheel. Leave a 2-3" tape unglued so that you can ...

How To: Change car rims and increase the size in Photoshop

In this how to video, you will learn how make car rims bigger using Photoshop. First, open the image in the program. Choose the elliptical marquee tool and select the rim. Next, right click the selection and click layer via copy. Now you should have the cut out rim in a new layer. Drag layer 1 bigger by holding shift. Replace it and then click on the accept button. Erase the part of the rim that is on the body of the car with the eraser tool. Have layer 1 selected and merge it down. Do the sa...

How To: Photoshop car rims onto a car

JdudeTutorials shows how to Photoshop the rims of a photo of a car, either for previewing different options for your vehicle or just for fun. Open the photo of the car (preferably shot from the side) in Adobe Photoshop. Open the desired rim photo. On the rim, use the lasso or magnetic lasso tool to select the rim from the background. Then copy the selected area and paste it into the car photo. Select the layer with the rim, select "free transform" and resize the image to fit the car's rim siz...

How To: Add Mag rims to a car in Photoshop CS3

In this software tutorial you will learn how to change the rims on a vehicle in Photoshop CS3. Get the rims you've always wanted on your car or truck, in Photoshop CS3 that is! In this video, you will see how to change the rims on a car to Mag Wheels rims with some simple Photoshop methods. This video is best viewed full screen.

How To: Change a dirt bike tire

To change a dirt bike tire follow these instructions. First use the crescent wrench set to loosen, and remove the axle bolt from the wheel you are working on. Then, slide the wheel out of the stays and lay it flat on the ground in an open area. Use the screwdriver to let the air out of the tire by depressing the valve stem with the blade. Now place the palm of your hand on the tire next to the very edge of the rim, and forcefully push downward. If all of the air is out of the tire and you do ...

How To: Model a rim for a car using 3D Studio Max 2008

Making a car takes a lot of time, money, and mechanical knowledge. If you don't have those things, plus the motivation to do so, why not make a 3D model of one? This two-part video will teach you how to make a 3D model of the rim of a car, the most important part depending on who you talk to. Check the related videos to find help with making the rest of the car.

How To: Make a paper tissue wreath with your kids

This is a demonstration of making a wreath with tissue paper. For this you will require tissue papers cut into squares, golden colored yarn, golden dust. For tools you require a pair of scissors, a hole punch, glue, paper dish. To start with cut the bottom of the paper dish neatly so that the uniform rim remains. Now apply glue to the rim in the form of spots and streaks. Now take each of the tissue paper pieces crush them and press on the glue. When the whole rim is covered with crushed tiss...

How To: Throw a frisbee golf disc

In this how-to video, you will learn how to throw a frisbee golf disc. There are two types of throws: backhands and forehands. The back hand is thrown with the thumb on the top of the disc and the fingers grabbing the interior rim. The palm rests on the outside rim. Follow through from one foot the other. A forehand throw is thrown with the thumb on the top of the disc and the middle finger against the rim. Right hand throws should have there right foot back and rock forward on release. Two o...

How To: Cut floor joists to length quickly and accurately

Fine Homebuilding with Jim Anderson demonstrates how to cut floor joists to length. Inspect the rim line to know where to set the joists. Set the joists to the layout on the rim line using a two man team. Tap a nail into the joist to keep it from moving around. Instead of standing the joists up to square them, cut them on both ends. Line the chalk line up with the rim line and snap the line across the joists to mark them. This will simultaneously measure and square them. Finally, line the joi...

How To: Change a road bike tire

This how-to video demonstrates how to change the tire of a road bike. First of all, the old tube must be removed with the help of some tire levers. The new tube that will fit the rim must be inflated at an optimal 5 psi. The tube will then be mounted on the rim starting with the valve so it doesn't lose air. After that the tire will go on back to the rim, this time without the help of tire levers, so the new tube won't be pinched. After the tire is adjusted, it is recommended to check if the ...

How To: Change a tubular bike tire

To change a tubular bike tire start by stretching the tube. Put your foot on the tire and pull it upward with your hands to stretch it out. Take a clean rim and put Tuflo tire tape onto the rim inching your way all the way around the rim leaving a 2-3 inch gap opposite the valve stem so that you can remove the tube in case of a flat. Pull a small section of the tuflo tape foil loose and leave it sticking out to side of the tire. Put the tire on the rim starting at the valve stem. Once you hav...

How To: Rim a cocktail glass

Learn how to rim a cocktail glass because it tastes so good when it touches your lips, says CHOW. One of the things that can be difficult is making a perfect rim witht either sugar or salt on a cocktail glass. Take a piece of citrus and rub it gently around the rim. Flip it over and press it gently in sugar or salt. Enjoy this quick cocktail tip.

How To: Find the Left 4 Dead 2 easter egg in the Dead Rising 2: Case West DLC

Zombies have followed hot on the heels of vampires as the monster du jour in modern America, and this has been particularly pronounced in video games for some reason. Gamers dig zombies, we suppose. The zombie game folks are even developing some camaraderie amongst themselves, as evidenced by the easter eggs exchanged in Left 4 Dead 2 and Dead Rising 2: Case West. This video will show you where and how to find a Left 4 Dead 2 reference / easter egg in Dead Rising 2: Case West.

How To: Change a tire on a folding bike

In this tutorial, we learn how to change a tire on a folding bike. First, you need to know how the bike goes together so you can take the tire off correctly. Once you have taken the tire off of the rim of the bike, you can discard with it. You can use either strong fingers or a wheel lever to help you take the wheel off if it's difficult. Next, you will need to slightly inflate the tire and add on the rim to the tire. Once it's on, you will need to inflate it and then place on the bike! Now y...

How To: Shoot free throw shots

In this edition of ClubHouseGas, with host Casey Bass, basketball coach Chuck Melito shows us how to shoot free throws. He shows us how to work on both the mental and the physical approach to free throw shooting. A right-handed shooter should place his right foot at the center of the basket. A left-handed shooter should place his left foor at the center of the basket. Then it's important to get balanced, so you're not leaning to one side or another, or more weight on one foot than the other. ...

How To: Throw a cast net the right way

First, you have to lay down your net and bundle up the rope in one hand like an extension cord all the way up to the net. Hold the net in the same hand, and grasp the rim of the net with the other hand. When you want to throw the net, grab the net midway with the rim in the other hand, and throw it towards your target with some spin, so the net lands flat on the water. If the net landed properly, it should sink slowly to the bottom, trapping some fish underneath it. To retract the net, simply...

How To: Paint your rims

Jennifer is showing us how to paint rims. You can use Dupicolor paint bought from Auto Zone and costs five dollars. First, you must sand and wipe your rims to ensure a smooth clean coat. Other items you will need are duct tape, newspaper, and a jack. The first step is to place the hand brake on, loosen up the first tire you want to work on, and then jack up the car to easily remove the wheel. Next, clean the tire and rim really well and use a paper towel to dry the rim. Tape newspaper around ...

How To: Make a margarita cocktail drink

The British Bartender shows you how to make a great Margarita. To make a great Margarita, follow these steps: Add the following ingredients to a cocktail shaker: 1 1/2 ounces of good tequila 1/4 ounce of Cointreau or Triple Sec. 3/4 ounce lime juice. Rim the glass in some salt by moistening the rim with a lemon or lime wedge, and then roll the glass in it. Only rim half the glass in case the person you will be giving it to doesn't like salt. Add ice to the shaker and shake well. Add ice to th...

How To: Make a Mexican martini

To make a perfect martini start by icing up a metal shaker. Then start adding the ingredients beginning with 2 ounces of premium tequila, 1 ounce of Cointreau liqueur, 1/4 ounce of Roses Lime Juice, and 1/2 teaspoon of granulated sugar. Put the lid on the shaker and shake the drink up. Moisten the rim of the martini glass with a lime, and then dip the glass in salt to coat the rim of the glass with salt. Pour the mix into the glass, and then put a slice of lime on the rim of the glass, and yo...

Prev Page