Wiping Rid Search Results

How To: Wax your snowboard

In this tutorial, we learn how to wax your snowboard. First, you will want to clean your board off of any impurities. Once you have done this, you will need to take your wax and run it on the edge of the board all the way around. After you have done this several times, run the wax around the board from the top to the bottom. Feel with your other hand all the way around the board to see how it feels with the wax on it. Then, spray the board with water and wipe it off. When you're finished, you...

How To: Make custom chipboard buttons for scrapbooking

In this video, we learn how to make custom chipboard buttons for scrapbooking. First, take a scrap of chipboard and use a circle trimmer to cut circles out. Cut circles out of patterned paper in different sizes using many different patterns. Now, apply glossy finish onto the papers and wipe off the excess liquid. Ink the edges after this, then put adhesive onto the back of each of the different circles. Now, you can punch holes into the center of the circle to make it look like a button. Now,...

How To: Pull a tape measure toilet paper roll prank

When in repose upon the toilet, the last thing most people want is for something to jump out at them. And that is exactly what will happen to them if you pull this prank. It turns out that the actual tape from a tape measure is a great little prank tool, and in this video you'll learn how to attach one to a roll of toilet paper so that when your victim attempts to wipe, they will be attacked by tape and scared... witless. Yes, witless.

How To: Make an electric guitar shaped birthday cake

In this Food video tutorial you will learn how to make an electric guitar shaped birthday cake. Take a 13 x 9” cake. Trim off the top to make it level. Flip it over, place the template of the guitar on it. The template is in two parts. Then cut out the cake. Now lay it out on a board and crumb coat it. Choose your child’s favorite colors and apply sufficient thickness and then smoothen it. You can put a spatula in hot water, wipe it and smoothen the frosting. Fill a freezer bag with frost...

How To: Remove yellow haze from headlights with toothpaste

First of all check for the yellow haze on the headlights by scratching it. Now take toothpaste and then apply some of it on to the headlight. Now you need a dry towel to clean the headlight. Start by rubbing the toothpaste over the headlight with this towel. You have to rub it hard so that the toothpaste cleans out the yellow haze. Start from the middle and make circular motions with the towel. Then start to spread out towards the corners of the headlight. Keep on doing it and you may even fe...

How To: Clean a microwave using only cheap, green products

The instructor shows us how to clean a microwave using green products in this video. First, take a microwave safe dish and pour some white vinegar into it. You will want to cover about 1 inch of the dish. Once in the microwave, turn on for around 2 minutes and remove the dish. Now, you take a wet wash clothe and rub ivory soap all over it. You can now clean the inside of your dirty microwave with the soapy clothe. Make sure once you're done scrubbing, you take a clean wash clothe and wipe all...

How To: Clean your CDs or DVDs with a banana

This video answers the question "does cleaning your CDs or DVDs with a banana work?". First, take a freshly cut piece of banana and rub it in circles on the disk gently. Rub it well for about two minutes. Then, take the peel and rub the inside of the banana peel in circles on the disk for about three minutes. The peel apparently provides some wax for the cleaning process of the disk. Next, take a cotton cloth and wipe it around the disk for as long as it takes to clean up the banana from the ...

How To: Wax a snowboard properly

In this video tutorial, viewers learn how to wax a snowboard. The materials required for waxing are: wax (cold, medium or warm temperature), scraper, brush, iron, wax paper, cloth and gloves. Begin by wiping the board with the cloth. Now rub the wax on the board. Then hold the wax against the iron to melt it, and then rub it on the board. The press the iron on some wax paper and spread it across the board. Leave it too cool for about 20-30 minutes. Then use the scrape to remove the wax layer....

How To: Solder wires

Soldering properly is a skill every electronics and computer hobbyist needs. Proper soldering appears deceptively simple, but it requires practice. One has to do the steps below to solder the wires which is as follows, First Clean the area you wish to solder and scrape the wire down to the metal and then wiping it clean with alcohol or acetone. Then you want to use a rosin-core solder for electronic applications, which comes normally with coils. Tin the tip of the first Wrap one or two inches...

How To: Turn Your OnePlus One into an Android/iOS Hybrid

While its hardware may already be a little outdated compared to newer flagship phones, the OnePlus One is still a great value thanks to the dedicated community that continues to develop ROMs for it. Cyanogen 12 and Oxygen OS are the two most popular ones, but neither offers the type of unique experience you get with Xiaomi's MIUI (pronounced "Me You I").

How To: Trick Verizon into Thinking You Never Modded Your Samsung Galaxy S III

One of the main reasons why the Samsung Galaxy S III has dethroned Apple's iPhone 4S as the best-selling smartphone in the world is due to Android's open-source operating system. The vast spectrum of customization that comes with Android has become one of its focal points, allowing n00bs and programmers alike to build and destroy. The open-source OS has allowed rooting and modified ROMs to flourish within Android community. The only problem with this is that rooting and installing your own RO...