Worth Placing Search Results

How To: Figure out Rubik's Cube notation

Has a Rubik's Cube got you stumped? This video demonstrates how to understand notation in a three-by-three cube. Step one of the video is to understand that there are three types of pieces in a cube. One is a center pieces, these demonstrate what the color of the side must become. Next, is an edge piece. This is one piece with two stickers. Lastly, there is a corner piece. This is a corner on the cube. It has three stickers. Finally, once you understand the notation of the pieces of the cube,...

How To: Make a vegan tamale pie

Jason Gaskins, Executive Chef with Roots Restaurant, and James Ehrlich with Hippy Gourmet demonstrate how to make a vegan tamale pie. First, dice an onion and add it to a pan of hot oil. Then, dice a tomato. Add de-skinned, freshly stewed tomatoes to the onion. Add roasted pepper and the fresh tomato to the pan. Next, add black trumpet mushroom or a mushroom of your choosing to the pan. Stir in fresh garlic, pepper, salt, paprika, cayenne pepper and cumin. Dice up cornbread and place it on an...

How To: Do a BOSU ball leg workout

Three movements on the bosu ball will challenge your balance and stability. They will also build strength in your lower body. First, warm up. Then, do a simple back squat on the bosu ball. Stand on the bosu ball with our feet in front of you, extend your arms, and squat. Do eight to ten repetitions. Then, do a one legged squat. Place one foot in the middle of the ball and extend the other leg back. Squat down and up. Do ten to twelve repetitions. The final exercise is a lateral one legged squ...

How To: Make a perpetual spinner

This video teaches the secret of making a cool perpetual spinner with a few little things and science. You will need: white paper, scissors, pen, pencil with eraser on its back, bell pin and a suitable cap. Draw a spiral shape on a plain sheet of white paper using a pen. Now cut out the drawn spiral with a scissor carefully. Punch the bell pin on the tail of a pencil. Stick a small cap (which suits the center of the spiral) to the center of the spiral as shown. Now stick the pencil on a table...

How To: Make spicy Indian papdi chaat

Chef Sanjay Thumma teaches the secrets of making spicy Indian papdi chaat in simple steps. Place the papdi on a plate and start by adding tamarind chutney on top. Now add chopped boiled potatoes and some mint chutney to its top. Add some chopped onion, tomato and cucumber on its top. Add some sweet yogurt to it and hot sauce if you wish to add it. Now add chili powder, cumin powder and sev to it. Repeat it with sweet yogurt, tamarind chutney and hot sauce to finish it. Now for the other type ...

How To: Get rocker rhinestone studded nails

The rhinestone studded nails will be more attractive. To make your nails a perfect complement to any acrylic or polished nails use your wildest imagination to make it more attractive. The following steps will help to make beautiful, rocker rhinestone studded nails. The first step is to clean the nail surface where you want the stickers to be placed. The second step is to apply a base coat, and the third step is to apply nail polish color. The fourth step is to peel off the stickers carefully ...

How To: Cook turkey breast with tomato and mozzarella

In the middle of town we meet our host who is showing us how to prepare turkey breast with tomato and mozzarella. He starts with slicing an onion, then a clove of garlic; he has amazing artistry with the knife. He heats up a pot and then places these ingredients and some salt and olive oil into the mix. He then opens a can of tomato sauce and places that in the pot as well. Letting it simmers, he then grills two cuts of turkey breast. Covering the breast in the sauce he then bakes it at 325 d...

How To: Create a rollover button in Flash

You can make a rollover button in Flash by following the instructions shown. You start by opening up Flash to work on your project. You then follow along and draw a shape for the actual button. Then follow the steps given to turn your shape into a button that is click-able and links to your movie clip. This is great for placing on a website instead of placing a bulky video clip on the site. If you complete the directions correctly you will have a fully working click-able button that will link...

How To: Patch a hole in the wall

A hole in your wall may in fact be easier to fix than is seems. After cutting a rectangular piece of drywall to patch up the hole, cut out another thin piece of drywall to use as a backing. By inflating a balloon and placing it in the back of your hole, the pressure caused by the balloon will allow you to put your backing and piece of drywall in place effectively, allowing you to cover up and sand over any holes in your wall. Using this innovative method, anyone will be able to fix holes in t...

How To: Store lettuce

Here's a guide in helping you store a lettuce properly and prolong its freshness. Place a paper towel on top of the lettuce and beat the stem portion with a hammer. Remove the stem of the lettuce by prying it out with your hands. Tear the lettuce into two sections or into small ones. Put all of it inside a zip lock bag and then place it inside a refrigerator. Take them out when the lettuce is needed for cooking. With these easy to do tips, you are now ready to cook those well preserved lettuc...

How To: Make a DIY designed tank top

Watch this video to learn how to make a tank top or shirt with lace and a print. You need a template with the picture of your choice, some lace, some fabric glue and fabric pins or safety pins, and a flat board about the size of a meal tray. Slide the board into the shirt. Put the template on top of the lace, then pin it in place. Next cut out the lace along the lines of the template. Arrange the lace on top of the shirt in the desired shape and glue it in place. Wait 48 hours before washing....

How To: Use Aqua Sand

This video explains how to set up an Aqua Sand gift box. The first step is to place the mold into the tank, and then fill with water. With a half-full bottle of Aqua Sand, by placing the nozzle face-down to the bottom of the tank and lifting upwards, you are able to create colorful towers. You can create multi-colored towers by starting with a wide base, then changing colors as many times as you wish while you move upwards. Users can also fill the mold with various colors of Aqua Sand, add de...

How To: Multiply & divide fractions using Excel key points

To multiply and divide the two fractions is a single step problems. Just multiply both the numerators and denominator for obtaining multiplication of two fractions, and for the division just multiply numerator of first fraction with denominator of second fraction and keep it in numerator place, and for the denominator place you just multiply the denominator of first fraction with numerator of second fraction.

How To: Install track lighting

This video shows how to install track lighting where you want to add or direct light. The first thing to do is to turn off the power to the circuit. If you don't have an electrical box where you want the lighting, you can purchase one at any home improvement store. If you have one, you will also need a track lighting adapter. Use masking tape for the pattern that you want, start around 18 to 24 inches from the wall. Remove the tape and replace it with chalk lines. Cut the tracks to size and a...

How To: Keep your side bangs in place

Are your side bangs getting a little long and unruly? Need a new way to keep you hair out of your eyes without chopping off your hair? Growing out your bangs and they're getting in the way? This instructional video will show you how to keep your bangs tame and under control. Our host narrates and uses simple and easy to follow instructions to simple clip longer bands back and hold them in place. This hair style only requires one bobby pin to complete it.

How To: Remove and replace a kitchen faucet

You can replace the kitchen faucet by yourself. If you decide to do it start by turning off both the hot and cold water using the valves under the sink. You'll need a basin wrench to get at and remove the pieces up under the sink. First you will loosen and remove the water lines and then the retainer nuts that hold the faucet in the sink. Pull the old faucet out. Put some plumbers putty on the sink and press the nylon gasket firmly in place. Thread the spray hose through the hole for the spra...

How To: Tie a double windsor knot

Tying a tie is a very useful skill, in this video, we are shown how to tie a Double Windsor knot, a very popular knot due to its symmetry. After placing the tie around your neck, if you are a right-handed person, make the thicker side the longer side on your right and pass this longer piece over the other one. Place the tie behind the other end and pull it through the hole and down, forming a small knot. Twisting the tie around itself backwards, pull the longer edge through on the other side ...

How To: Remove and replace a door latch

In this quick yet informational video, Ron Hazelton shows us how to replace an old or malfunctioning door latch in your home. After removing the doorknob itself, use a screwdriver to remove the ring around the base of the knob and then unscrew the backing that is holding the other side of the doorknob in place. Remove the old door latch and then replace it with the new one, putting in first the latch itself and one side of the doorknob. Use the screwdriver to hold this in place and then add t...

How To: Install wainscotting (wod paneling)

Ron Hazelton brings you this video on wainscoting. Wainscoting is paneling that runs about a third of the way up a wall. Ron shows you how to use a chair to figure exactly where to place the chair rail. When installing around electrical outlets be sure to turn off the electricity. Next cut all the panel sections to length. When you attach them to the wall be sure to attach at top and bottom. Next attach the paneling, you can use a scarf joint to hide the seams. When installing the chair rail,...

How To: Make Toad in the Hole (sausages and Yorkshire pudding)

In this tutorial we learn how to make Toad in the Hole (sausages and Yorkshire pudding). First, place your sausages in a pan and grill them. After this, add in flour, eggs, salt, water, and milk into a large saucepan. From here, whisk it together for a couple of minutes to remove any bumps or lumps. Now, pour this batter mix over your sausages and place it in the oven. Keep this on high and wait until the top is golden brown and it is cooked all the way through, around 15-20 minutes. When fin...

How To: Make Pavlova (an Australian meringue dessert)

This video provides instructions on how to make Pavlova which is an Australian desert. Using an electric mixer beat egg whites until they are nice and foamy. Then slowly add two cups of a fine sugar. Add until it is completely mixed in and dissolved. Then add two teaspoons of vanilla extract, 1/2 teaspoon cream of tartar. Mix until stiff. On a baking sheet place two pieces of baking paper. Then spoon mixture onto tray forming the mixture into a cake shape with a flatter top. Place into pre-he...

How To: Use proper ball position for accurate golf drives

Not everybody knows exactly where the position the ball when teeing off. Do you know where it should be placed? Director of Education for Troon Golf, Tim Mahoney, teaches you where to place the golf ball in your stance and how that impacts your ballflight. Just watch to see how to properly position the golf ball for your drive.

How To: Draw Snoopy (of Charlie Brown & the Peanuts Gang fame)

The video shows you in simple easy steps how to draw Snoopy from Charlie Brown. It starts with a single line drawing the ear and the head then adding the neck, nose and eye, adding shading. Then a simple triangular shape for the body, adding the hands. Simple circles are used for the feet, connecting them to the basic triangle shape and adding a tail. Removing the triangle shape then gives the body flow and then adding the collar and feet finally gives you the Snoopy character from Charlie Br...

How To: Clean your laptop's keyboard by removing the keys

In this video DavidDaGeek shows how to clean your keyboard by removing your keys, but to be careful when doing this. Put your finger underneath a key and just pull it off. Don't break the piece that holds the key in place though! he starts at the shift key and works to the left with the ? being next. Then remove the hair or dust with your fingers. Don't remove them all at once because you might forget what order they go in. To put the key back in, put it in its spot, and click it back in. You...

How To: Make Vincent Valentine's arm guard

This video explains how to make Vincent Valentine's arm guards in under 20mins. The supplies needed to complete this task include card paper, tape, gold spray, pencil and scissors. A ruler must be used to measure the length of your hand and fingers so you can correctly size the arm guards. Card paper is the cut into many small circles and placed around all of the fingers and then painted with gold spray. The hand portion is created by wrapping your hand with card paper and pulling tight befor...

How To: Perform a simple mind trick with cups

This is a video tutorial in the Pranks and Cons category where you are going to learn how to perform a simple mind trick with cups. For this you will need three cups or any similar articles under which another object can be hidden. You then ask one of your spectators to hide an object under one of the cups while your back is turned towards the cups. Then you turn around and point out the cup under which the object is hidden. The trick is to put an indiscernible mark on one of the cups that on...

How To: Make a fast and easy tennis ball trebuchet

In this tutorial, we learn how to make a fast and easy tennis ball trebuchet. This tool will throw tennis balls easily so you can hit them without having a partner around. This only needs a few pieces of wood and 2x4's along with dumbbells. There isn't a whole lot to this, it's very simple to build. Use two 10 lb dumbbells clamped with a hose clamp onto the top of a 2x4. Use a dowel to go through this, so it will help it rotate. Down at the bottom is the release mechanism and on the sides wil...

How To: Lay and ballast O-Scale 3-Rail track

In this tutorial we learn how to lay and ballast O-Scale 3-Rail track. First, lay the track down on a piece of bare plywood. Also, you will paint the wood to prevent it from absorbing liquid when you place glue on it. Put the track down onto a flex bed and then set the flex bed on the wood. From here, place the track onto the road bed and line it up. Make sure the track is centered completely. After this, take a track screw and secure the ends down. Continue to do this throughout the entire t...

How To: Roast a chicken for Christmas dinner

In this video Nicko teaches us how to roast a chicken for Christmas dinner. You will need: 1 large whole chicken, 2 lemons, seasons, paprika, chicken spice, chicken spice, cayenne pepper, bbq seasoning, salt, and pepper. The optional vegetables you can use are: baby potatoes and red onions. First, place your chicken on a roast rack and cover it with the seasoning and the lemon juice. After this, cut your potatoes up and place them around the chicken with onions. Now, roast the chicken in the ...

How To: Make your man propose with feng shui

In this tutorial, we learn how to make your man propose with feng shui. Having a room with the proper arrangements, it can help your man propose. Your focus room should be in the far right hand corner by the front door facing in. First of all, don't have a bed shoved up against the wall or have a drab painting on the wall either. To fix this, place a bed in the middle of the room and give it calming colors. Then, place a relaxing painting on the wall with minimal items around the room. This w...

How To: Make a Spartan 300 shield

In this tutorial, we learn how to make a Spartan 300 shield. You will need: paper mache, durable cloth, gold spray paint, newspapers, cardboard, nuts and bolts, and the cap to a trash can. After you have these, cut out a large piece of cardboard and place it over the trash can cap in a circle shape. Then, dip newspaper strips into the paper mache mixture and apply it to your shield, taking your time to make it smooth. Let this dry, then cut two strips of cardboard and place it in a 'v' shape ...