Year End Search Results

How To: Make a wrapper chain from candy wrappers

First, cut out 1 x 2.75" pieces of paper. Fold a piece of paper in half, and then in fourths. Fold it in half again to make eights, and keep doing so until you get 32 individual pieces of paper. Now you must fold each paper in half length-wise, and then open it up and fold the flaps so that the ends meet the half way point. Do the same width-wise. You can make an interesting chain if you use different paper colors together. Connect each piece so that the ends of one piece go inside the ends o...

How To: Change your color at the end of your crochet row

This video teaches the secret to change the color at the end of a crochet row. An excellent summary is given below. First do the last double crochet by wrapping around, stick it through your last Stitch, wrap around again, pull through and stop. Grab the second color, leave a little bit of tail, put it on your hook and pull through all the loops. Grab your new color leaving the tail, wrap around and pull through for chain 1, again do the same for chain two and turn it around. To continue wrap...

How To: Play sharps and flats on the piano

This how to video covers sharps, flats, and also introduces the circle of fifths. A fun way to remember the circle of fifths is "Father Charles Goes Down And Ends Battle" for sharps and "Battle Ends And Down Goes Charles Father" for flats. This tutorial is essential for every musician and beginning pianists. Watch this music theory video and you will have a grasp of the circle of fifths in no time.

How To: Wire-wrap leather for jewelry

Wrapping leather is the least of your worries when it comes to the meticulous and dexterous art of making jewelry. IIf you have the basic jewelry making skills down, doing this wire-wrap on leather should be a cinch.. This demonstration video will help walk you through the process of wire-wrapping leather.

How To: Do a center-drilled single-end wire-wrap for jewelry

The long name of this technique makes the meticulousness and dexterity skills of making jewelry a must. If you aren't perfect in all your techniques, this might stump you, but practice makes perfect. Wire wrapping a center-drilled, single-end stone takes skill. This demonstration video will help walk you through the process of doing a center-drilled single-end wire-wrap.

How To: Crimp beads on soft flex wire for jewelry

Throughout the meticulous and dexterous process of jewelry making, when you get to the end of your bracelet or necklace, there's a feeling of accomplishment and satisfaction. But to seal the deal, you need to crimp. Crimping is a necessary process for the ends of your homemade jewelry. This demonstration video will help walk you through the process of this crimping end beads on soft flex.

How To: Make a very simple air rocket

This tutorial shows how to construct a mouth-launched air rocket. He begins with an ordinary strip of chewing gum. After removing the gun, he flattens out the wrapper. He then carefully wraps the long end of the wrapper around his index finger, leaving about half the wrapper protruding off the end of his finger. This creates a cylinder. Then he twists off the protruding end tightly and pulls it off his finger. To launch the projectile, he puts the rocket between his lips and blows. This desig...

How To: Wear a sari

To wear a sari takes only the ability to properly fold and wrap the yards of often brightly colored and flowing fabric. With just a pin at the shoulder you can replicate the technique for this traditional Indian garb.

How To: Get rid of split ends

The only way to get rid of split ends is to cut them and to apply a shine product to moisturize the end of the hair. Learn to apply shine products to get rid of split ends using this free video from an experienced hairdresser.

How To: Lose belly fat for middle aged women

This video tutorial is in the Diet & Health category where you will learn how to lose belly fat for middle aged women. This video shows inner thigh exercises, triceps and back workouts. Sit on the floor with your legs stretched in front. Take a stretch band , put it around the feet, criss-cross the ends of the band and hold the ends above the waist. Now bend your knees and lie on your back. Then, while lying on your back, you stretch your legs upwards and your hands sideways. Bend your knees ...

How To: Tie a leather knot end for jewelry

One of the hardest parts about jewelry making is the knot-tying. It's an intricate process, much like jewelry making in general, which is meticulous and dexterous. Working with leather is also more difficult because of it's thickness and un-malleable contour. This demonstration video will help walk you through the process of tying a knot end with leather.

How To: Make a wooden spear from scratch

Making a wooden spear requires a between medium and small thick stick, a rectangular piece of board, a hatchet and a wood clipper. The branches off the stick is removed and thrown away. The stick is clipped at the smaller end. It is then placed on the board and the larger end is cut off with the hatchet, while the stick rotates in a circular motion on the board to remove the outer skin. Closer attention is paid the shaping and cutting of the point of that larger side to get it in formation. T...

How To: Make a levitating card

To levitate a playing card you will need an ordinary playing card, scotch or clear tape, a pair of scissors, white paper and some string or yarn. First, measure the yarn by holding it up to your ear and cut the yarn at the desired level. Then, place the yarn to the white paper and separate it until you pull one thin thread from the yarn. Set the thread on the white piece of paper. Tape both ends of the thread. Tape the thread to the card. Tape the other end of the thread to your ear. You can ...

How To: Build a skateboard kicker ramp

This video starts out by showing the tools needed to build a skateboard kicker ramp: saw, drill, jigsaw, screwdriver, and wood. They then begin to cut the pieces of wood and screwing them together in the shape of a ramp. The instructions indicate to wet the ply board so it will bend to fit the shape of the ramp. They demonstrate how to measure the proper position of the board and screws using a string. They end by cutting the ply board at the proper length to allow the skateboard to life off ...

How To: Make a basic hemp bracelet

In this video, lbedrick shows us how to make an easy hemp bracelet. First get some hemp and two beads. You will need one small bead for the end knot and whatever bead you want for the middle. Cut two pieces of hemp about 40 inches each and bend them in the middle. Where you bend the two pieces, tie a knot. Separate the two end pieces, then fold the right string over the base string, but under the left string. Fold the left string under the base strand, through the right loop, up and over, the...

How To: Solder with a lighter

This video teaches how to solder two wires using a lighter in simple steps. First strip together two ends of a wire by removing their outer cover. Now take a lighter and start heating the wire ends. Heat the wires till it starts melting. When its starting to melt use another thin wire or rod and rub the wires so that the wires sticks tightly. Finish when the wires are soldered perfectly.

How To: Make a simple dreamcatcher

Gather your hoop and supplies. Wrap the suede evenly around the entire ring. Wrap it either eight or sixteen times, depending upon your preference. Glue the ends to the hoop. Secure them with a clothespin until the glue dries. Make the web. Tie the nylon string to the suede. Make eight knots evenly dispersed around the ring. Keep the thread taunt between knots. Make a second row. Place each knot "between" the knots of the previous row. Continue in this manner until a small hole remains in the...

How To: Play a live chess blitz game

These are seven videos of different live blitz games to show you some proper moves for fast play. In the first game, as a homage to Krakkaskak, the Polar Bear system, 1.f4, is tried, ending up in unfamiliar territory, but winning on time in an easily one rook ending.

How To: Balance on a rolla bolla

Watch this instructional video to learn how to balance on a rolla bolla. A rolla bolla has two parts, the roller and the board. To begin with place the roller on the ground, it helps if you use some kind of carpeted surface or something like that when you're beginning, that will help slow down the rolling and make it easier to balance. Next take the board and place it on top of the roller, with the roller about two-thirds of the way up the board. Place your left foot on the lower end of the r...

How To: Use the Samsung F480 Tocco mobile phone

The Samsung Tocco, also known as F480 is the first in a series of capacitive touchscreen phones hitting the market this year. The Tocco features a new and unique TOUCHWIZ UI replacing the Croix UI. The 5-megapixel camera featuring auto focus and a CMOS video lens; are normally only found in high-end or prosumer DSLR cameras. So it’s an amazing feature to have on a phone, especially when the Tocco only measures 11.6 mm thick by 98.4 mm tall and 55 mm wide. In addition to CMOS, the F480 also fe...

How To: Make your own ballet style tutu

Tutus are not just for ballerinas anymore! Anyone who feels like twirling, dancing or just running around with a little extra poof can wear one! Follow this tutorial and make a tutu for yourself, your daughter or anyone else looking for a little fluff!

How To: Braid extensions into hair

You will need 2 packs of kanekalon hair extensions, gel, for a firmer hold. You will also need clips to get the hair out of the way and a comb to make straight lines. A lighter is also used, to seal the ends. You first want to separate the air into sections. Put a little bit of gel at the root of the strands. You get the strand of extensions between your thumb and index finger, with the strand in the middle. Then you braid the extensions with the natural hair and twist so the two of them bond...

How To: Divide numbers using long division

This video focuses on how to do long division. She starts by dividing 1548 by 26, going incrementally between each value. She first take 26 into the first three numbers of 1548 (154) and gets 5, then takes the remainder of 24 (154-130) and brings down the 8 to get 248. She then divides 248 by 26 to get 9 with a remainder of 14. She then goes into some detail as to how to extract the decimal from the remainder by continuing the long division and adding zeros to the end of the divisor. At the e...

How To: Handle a PC freeze

If you work with a computer, at some point in time your computer is going to freeze. Hopefully, you've been saving any important data or writing you've been doing because there are a few easy steps to take to get that computer running smoothly.

How To: Make a light bulb glow with an electrical circuit

One of the basics of electronics is knowing how an electrical current works. For this video, you will need a 1.2V battery, a lightbulb, and 2 copper wires. First, take the wires and attach one end of each wire to opposite sides of the battery. Have a friend hold the wires there, or tape the wires down. Then, take the unattached ends of the wires. Take one wire and touch it to the upper part of the base of the lightbulb. Take the other wire, and touch it to the bottom. The lightbulb should now...